1. Product Overview
The Innovations Lighting Aditi Wall Sconce, model 623-1W-SN-G182, is a single-light fixture designed for wall mounting. It features a brushed satin nickel finish and a clear bell-shaped glass shade, part of the Aditi Collection. This fixture is suitable for damp locations and is dimmable, offering versatile lighting options for your space.
A detailed view of the Innovations Lighting Aditi Wall Sconce, showcasing its brushed satin nickel finish, clear bell-shaped glass shade, and the exposed filament bulb inside.
2. Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or even fatal. Keep these instructions for future reference.
- WARNING: To avoid electric shock, ensure the electricity is turned off at the main fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Do not exceed the maximum wattage per socket specified for this fixture.
- Handle glass components with care to prevent breakage.
- This fixture is rated for damp locations. Do not install in areas where it will be directly exposed to water.
3. Setup and Installation
3.1 Pre-Installation
- Turn off power at the circuit breaker or fuse box.
- Carefully unpack the fixture and its components. Retain all packaging materials until installation is complete to ensure no parts are missing.
- Identify all parts: mounting strap, mounting screws, wire nuts, fixture body, glass shade, and shade ring.
3.2 Mounting the Fixture
- Attach the mounting strap to the junction box using the provided mounting screws. Ensure the strap is securely fastened.
- Pull the electrical wires from the junction box through the center hole of the mounting strap.
3.3 Wiring Connections
- Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box using a wire nut. If no ground wire is present in the junction box, connect the fixture ground wire to the green grounding screw on the mounting strap.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Carefully tuck all wires into the junction box.
3.4 Securing the Fixture and Installing the Shade
- Align the fixture body with the mounting strap and secure it with the provided decorative nuts or screws.
- Carefully place the clear bell glass shade onto the fixture. Secure it in place using the shade ring or retaining screws, ensuring it is snug but not overtightened.
- Install one (1) 60W Medium Base bulb (not included) into the socket. Do not exceed 100W maximum wattage.
4. Operating Instructions
Once installation is complete and verified, restore power at the circuit breaker. The fixture can then be operated using a standard wall switch. If connected to a compatible dimmer switch, the light output can be adjusted accordingly.
5. Maintenance
5.1 Cleaning
- Always turn off the power supply before cleaning the fixture.
- To clean the metal finish, use a soft, dry cloth. Do not use abrasive cleaners or polishes as they may damage the finish.
- The glass shade can be cleaned with a mild glass cleaner and a soft cloth. Ensure the glass is completely dry before restoring power.
5.2 Bulb Replacement
- Turn off the power supply at the circuit breaker before replacing the bulb.
- Allow the bulb to cool completely before touching it.
- Carefully unscrew the old bulb.
- Install a new 60W Medium Base bulb (or equivalent LED) into the socket. Do not exceed the maximum wattage of 100W.
- Restore power once the new bulb is securely in place.
6. Troubleshooting
If the fixture does not light up, perform the following checks:
- No Power: Ensure the power supply is turned on at the circuit breaker. Check that the wall switch is in the 'ON' position.
- Bulb Issue: Verify that the bulb is correctly installed and not loose. Replace the bulb with a new one to rule out a faulty bulb.
- Wiring: With the power off, carefully inspect the wiring connections inside the junction box. Ensure all wire nuts are secure and connections are firm. If unsure, consult a qualified electrician.
- Fixture Damage: Inspect the fixture for any visible damage. If damage is present, discontinue use and contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Innovations |
| Model Number | 623-1W-SN-G182 |
| Collection | Aditi |
| Material | Steel, Cast Brass, Glass |
| Metal Finish (Body) | Brushed Satin Nickel |
| Metal Finish (Canopy/Backplate) | Brushed Satin Nickel |
| Dimensions (H x W x Ext) | 13 inches x 6 inches x 8 inches |
| Maximum Wattage Per Socket | 100W |
| Bulb Type (Not Included) | Medium Base (E26) |
| Dimmable | Yes |
| Voltage | 120V |
| Glass Shade Description | Clear Canton |
| Glass Type | Transparent |
| Glass Shade Shape | Bell |
| Shade Material | Glass |
| Shade Size (Diameter x Height) | 6 inches x 7.25 inches |
| Shade Fitter Measurement | 3.25 inch Fitter |
| Canopy Dimensions | 4.5 inches |
| Backplate Dimensions | 4.5 inches x 0.75 inches |
| Certification | UL & ETL, Damp Location |
| Item Weight | 5 pounds |
8. Warranty and Support
For warranty information or technical support, please contact Innovations Lighting customer service. Keep your purchase receipt and model number handy for efficient assistance. Do not attempt to repair the fixture yourself, as this may void the warranty and pose safety risks.
