Gevril 5050 Avenue of Americas Swiss Automatic Watch Instruction Manual

1. Overview

The Gevril 5050 Avenue of Americas watch is a Swiss automatic self-wind timepiece featuring an analog display and a date function. This robust watch is designed with an IP black stainless steel case, a black dial with luminous indices and hands, and a black genuine leather strap. It is equipped with a protective sapphire crystal window and offers water resistance up to 50 meters (165 feet).

Figure 1: Front view of the Gevril 5050 Avenue of Americas watch, showcasing its rectangular case, black dial, and date display.

2. Initial Setup

2.1. Winding the Watch

As an automatic self-wind watch, the Gevril 5050 is powered by the motion of your wrist. If the watch has stopped or is running low on power, it can be manually wound:

1. Gently unscrew the crown (if it's a screw-down crown) and pull it out to position 1 (winding position).
2. Turn the crown clockwise approximately 20-30 times. This will provide enough power reserve to start the watch.
3. Push the crown back in and screw it down securely (if applicable) to ensure water resistance.

The watch will continue to wind itself as long as it is worn regularly. If not worn for an extended period, it may stop and require manual winding again.

2.2. Setting the Time

1. Pull the crown out to position 2 (time setting position).
2. Turn the crown clockwise or counter-clockwise to move the hour and minute hands to the desired time.
3. Once the time is set, push the crown back into position 0 (normal operating position) and screw it down securely (if applicable).

2.3. Setting the Date

The Gevril 5050 features an open date window. To set the date:

1. Pull the crown out to position 1 (date setting position).
2. Turn the crown counter-clockwise to adjust the date.
3. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement. If the current time falls within this period, first set the time outside this range, then set the date, and finally reset the correct time.
4. Once the date is set, push the crown back into position 0 (normal operating position) and screw it down securely (if applicable).

Figure 2: The Gevril 5050 watch displayed on a wrist, illustrating its fit and appearance during wear.

3. Operating the Watch

3.1. Automatic Movement

Your Gevril 5050 watch is equipped with a Swiss automatic movement. This means it does not require a battery. The movement of your arm winds the mainspring, providing power to the watch. When fully wound, the watch typically has a power reserve of approximately 38-42 hours. If the watch is not worn for an extended period, it will stop and need to be manually wound as described in Section 2.1.

3.2. Water Resistance

This watch is water resistant to 50 meters (165 feet). This rating makes it suitable for short periods of recreational swimming. However, it is not recommended for diving or prolonged water activities. Always ensure the crown is fully pushed in and screwed down (if applicable) before any contact with water. Avoid operating the crown while the watch is wet or submerged.

4. Care and Maintenance

4.1. Cleaning

To maintain the appearance of your watch, wipe the case and crystal with a soft, dry cloth. For the leather strap, avoid excessive moisture and harsh chemicals. If the strap becomes wet, allow it to air dry naturally, away from direct heat.

4.2. Storage

When not wearing your watch, store it in a cool, dry place, preferably in its original box or a watch winder to keep the automatic movement running. Avoid exposing the watch to extreme temperatures, direct sunlight, or strong magnetic fields, as these can affect its accuracy and longevity.

Figure 3: The Gevril watch presentation box, suitable for storage when the watch is not being worn.

4.3. Professional Service

For optimal performance and longevity, it is recommended to have your automatic watch serviced by a qualified watchmaker every 3-5 years. This service typically includes cleaning, lubrication, and adjustment of the movement.

5. Troubleshooting

5.1. Watch Not Running

• Insufficient Winding: If the watch has not been worn or manually wound for a while, it may have run out of power. Manually wind the watch by turning the crown 20-30 times clockwise in position 1.
• Lack of Movement: Automatic watches require regular wrist movement to stay wound. Ensure you are wearing the watch consistently or using a watch winder.

5.2. Date Not Changing Correctly

• Incorrect Setting Time: Avoid setting the date between 9 PM and 3 AM. If you need to adjust the date during these hours, first set the time outside this range, adjust the date, then reset the correct time.
• Crown Position: Ensure the crown is pulled out to the correct position (position 1) for date adjustment.

If issues persist, please contact Gevril customer support or a certified watch repair center.

6. Specifications

Figure 4: A visual guide for watch case sizes, illustrating various diameters for comparison.

7. Warranty and Support

The Gevril 5050 Avenue of Americas watch comes with a manufacturer's warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official Gevril website.

For customer support, service inquiries, or to locate an authorized service center, please visit the Gevril Store on Amazon or the official Gevril website.

8. Product Video Demonstration