Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Steelcraft 402119 Side Steps. These side steps are designed for specific vehicle applications, featuring a no-drill installation process, custom mounting brackets, and high-quality 304 polished stainless steel construction with custom polyethylene step pads. Please read this manual thoroughly before beginning installation to ensure proper fitment and safe use.
Safety Information
Always prioritize safety during installation and use. Failure to follow these instructions could result in injury or damage to the product or vehicle.
- Ensure the vehicle is parked on a level surface with the parking brake engaged before beginning installation.
- Wear appropriate personal protective equipment, including safety glasses and gloves.
- Do not overtighten fasteners. Refer to vehicle manufacturer specifications for torque values where applicable.
- Verify all components are securely fastened before operating the vehicle.
- Keep children and pets away from the work area during installation.
- Periodically inspect the side steps and mounting hardware for any signs of wear, damage, or loosening.
Parts List
Before beginning installation, verify that all parts listed below are present and undamaged.
| Item | Description | Quantity |
|---|---|---|
| Side Step Assembly | Polished stainless steel tube with polyethylene step pads (Left & Right) | 2 |
| Mounting Brackets | Vehicle-specific brackets for attachment to the vehicle frame | Varies by application (e.g., 4-6) |
| Hardware Kit | Bolts, washers, nuts, and other fasteners | 1 set |
Note: Specific bracket and hardware quantities may vary based on your vehicle's make and model. Refer to the separate vehicle-specific installation guide if provided.
Setup and Installation
The Steelcraft 402119 Side Steps feature a no-drill installation for most applications. Follow these general steps. For detailed vehicle-specific instructions, consult the separate installation sheet that came with your product or visit the manufacturer's website.
Tools Required:
- Socket Wrench Set
- Combination Wrenches
- Torque Wrench (recommended)
- Measuring Tape
- Marker or Grease Pencil
General Installation Steps:
- Prepare the Vehicle: Park the vehicle on a flat, stable surface. Engage the parking brake. If necessary, raise the vehicle using a lift or jack stands for better access to the undercarriage.
- Identify Mounting Points: Locate the factory mounting points on the vehicle's frame or rocker panel. These are typically pre-drilled holes or existing bolts.
- Attach Mounting Brackets: Secure the vehicle-specific mounting brackets to the identified mounting points using the provided hardware. Do not fully tighten bolts at this stage.
- Position Side Step: Carefully lift the side step assembly and align it with the attached mounting brackets.
- Secure Side Step to Brackets: Attach the side step to the mounting brackets using the remaining hardware. Again, do not fully tighten.
- Adjust and Align: Adjust the position of the side step to ensure it is level and properly aligned with the vehicle body.
- Final Tightening: Once satisfied with the alignment, progressively tighten all bolts, starting from the center and working outwards. Refer to the vehicle-specific guide for torque specifications.
- Repeat for Other Side: Follow the same steps for the opposite side of the vehicle.
- Final Inspection: Double-check all fasteners to ensure they are securely tightened. Test the stability of the side steps by applying moderate pressure.
Image: Mounting bracket securely attached to the side step.
Image: Underside view showing mounting holes on the side step.
Image: The Steelcraft 402119 Side Steps, ready for installation.
Operating and Use
Steelcraft 402119 Side Steps are designed to provide a convenient and safe step into and out of your vehicle. To ensure longevity and safety:
- Step onto the polyethylene step pads, which are designed for optimal grip.
- Avoid placing excessive or concentrated weight on the steps.
- Do not use the side steps as a jacking point for the vehicle.
- Be mindful of clearance when driving over obstacles or through uneven terrain.
Image: Detail of the custom polyethylene step pad for secure footing.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your Steelcraft side steps.
- Cleaning: Clean the polished stainless steel surfaces with a mild soap and water solution. Avoid abrasive cleaners or harsh chemicals that can damage the finish. Rinse thoroughly and dry with a soft cloth to prevent water spots.
- Inspection: Periodically inspect all mounting hardware for tightness. Vibrations from driving can cause fasteners to loosen over time. Re-tighten any loose bolts to the recommended torque specifications.
- Damage Check: Check the step pads and stainless steel tubes for any signs of damage, cracks, or excessive wear. Replace damaged components as necessary.
Image: The polished stainless steel finish requires gentle cleaning.
Troubleshooting
If you encounter issues with your Steelcraft 402119 Side Steps, consider the following common solutions:
- Problem: Side step feels loose or wobbly.
Solution: Re-check all mounting bolts and nuts. Ensure they are tightened to the correct torque specifications. Over time, road vibrations can cause fasteners to loosen. - Problem: Squeaking or rattling noise from the side step.
Solution: Inspect all contact points between the side step, brackets, and vehicle frame. Ensure there is no metal-on-metal contact that could cause noise. Apply a small amount of silicone grease to contact points if necessary, avoiding step pad surfaces. - Problem: Corrosion or discoloration on the stainless steel.
Solution: While 304 stainless steel is highly corrosion-resistant, it can still show surface stains from road salts or environmental contaminants. Clean immediately with a non-abrasive stainless steel cleaner or mild soap and water. For stubborn spots, a specialized stainless steel polish may be used.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | 402119 |
| Brand | Steelcraft |
| Material | 304 Polished Stainless Steel |
| Exterior Finish | Polished Stainless Steel |
| Step Pads | Custom Polyethylene |
| Dimensions (L x W x H) | 78 x 12 x 5.5 inches (approximate, per step) |
| Item Weight | 57 Pounds (total package) |
| Installation Type | No-Drill (for most applications) |
| UPC | 840813158990 |
Warranty Information
Steelcraft 402119 Side Steps come with a Limited Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and claim procedures, please refer to the warranty card included with your product or visit the official Steelcraft website.
Note: Damage resulting from improper installation, accident, misuse, abuse, or unauthorized modification is not covered under warranty.
Customer Support
If you have any questions regarding the installation, operation, or maintenance of your Steelcraft 402119 Side Steps, please contact Steelcraft customer support:
- Website: www.steelcraftinc.com (Please check for the most current contact information)
- Phone: Refer to the Steelcraft website for regional contact numbers.
- Email: Refer to the Steelcraft website for support email addresses.
When contacting support, please have your product model number (402119) and purchase information readily available.
