Line 6 AMPLIFi TT User Manual

1. Product Overview

The Line 6 AMPLIFi TT is a versatile desktop guitar processor designed to integrate seamlessly into your home audio system, turning any room into a dynamic jam space. It offers a wide array of over 200 award-winning amps and effects, allowing guitarists to explore diverse tones. Its Bluetooth connectivity enables wireless music streaming from your devices, facilitating practice and play-along sessions. The accompanying AMPLIFi Remote app provides intuitive control over tones and features, including tone matching to your music library.

Figure 1: Front view of the Line 6 AMPLIFi TT, showcasing its compact design and control knobs.

2. Setup Guide

2.1 Unpacking and Initial Inspection

Carefully remove the AMPLIFi TT from its packaging. Inspect the unit for any signs of damage. Ensure all components listed in the packing list are present.

2.2 Connecting to Power

Connect the provided power adapter to the 9VDC input on the rear of the AMPLIFi TT. Plug the adapter into a suitable electrical outlet. The unit is powered via a corded electric connection.

2.3 Audio Connections

• Guitar Input: Plug your guitar into the 6.35mm Jack labeled "GUITAR IN" on the front panel.
• Main Outputs: Connect the AMPLIFi TT to your stereo system, powered speakers, or audio interface using the Left and Right 6.35mm Jack "MAIN OUTS" on the rear panel.
• Headphone Output: For private practice, connect headphones to the 3.5mm Jack headphone output on the front panel.
• Optical Out: For digital audio connection, use the OPTICAL OUT port on the rear.
• USB Connection: Connect to a computer via the USB port for recording and software updates.
• FBV Connection: Connect an optional Line 6 FBV foot controller to the FBV port for hands-free control.

Figure 2: Front panel connections including Guitar In and Headphone Out.

Figure 3: Rear panel connections for main outputs, optical out, USB, and FBV.

3. Operating Instructions

3.1 Powering On/Off

Press the "POWER" button located on the top panel to turn the unit on or off. Allow a few seconds for the unit to initialize.

3.2 Bluetooth Audio Streaming

The AMPLIFi TT allows you to stream music wirelessly from any Bluetooth-enabled device (smartphone, tablet, computer). Pair your device with the AMPLIFi TT via your device's Bluetooth settings. Once paired, audio from your device will play through the AMPLIFi TT's connected output.

3.3 Using the AMPLIFi Remote App

The AMPLIFi Remote app (available for iOS and Android) is essential for unlocking the full potential of your AMPLIFi TT. It provides access to:

• Tone Matching: The app can analyze songs in your music library and suggest guitar tones that match.
• Extensive Tone Library: Access over 200 amps, effects, and speaker cabinets. Explore thousands of tones in the Line 6 Tone Cloud, created by a global community of guitarists.
• Deep Tone Editing: Customize every aspect of your tone, from amp models and effects parameters to signal chain order.
• Preset Management: Save, organize, and recall your favorite tones.
• Independent Volume Control: Adjust the volume of your guitar and the streamed music independently for optimal practice balance.

3.4 Recording with AMPLIFi TT

Connect the AMPLIFi TT to your computer via USB. The unit functions as a high-quality audio interface, allowing you to record your guitar with all the processed tones directly into your digital audio workstation (DAW).

4. Maintenance

To ensure the longevity and optimal performance of your Line 6 AMPLIFi TT, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the exterior. Avoid abrasive cleaners or solvents.
• Storage: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
• Ventilation: Ensure proper ventilation around the unit to prevent overheating. Do not block any vents.
• Cable Management: Avoid kinking or excessive bending of cables. Disconnect cables by pulling the plug, not the cable itself.

5. Troubleshooting

If you encounter issues with your AMPLIFi TT, refer to the following common problems and solutions:

• No Sound Output:
  • Check all cable connections (guitar, main outputs, headphones).
  • Ensure the AMPLIFi TT is powered on and the volume is turned up.
  • Verify that your connected audio system or headphones are functioning correctly.
  • Check the volume levels within the AMPLIFi Remote app, ensuring both guitar and music levels are audible.
• Bluetooth Connectivity Issues:
  • Ensure Bluetooth is enabled on your device and the AMPLIFi TT.
  • Try unpairing and re-pairing the device.
  • Move your device closer to the AMPLIFi TT to ensure a strong signal.
  • Restart both the AMPLIFi TT and your Bluetooth device.
• App Performance Issues (Crashing/Unresponsive):
  • Ensure your AMPLIFi Remote app is updated to the latest version.
  • Close and restart the app.
  • Restart your mobile device.
  • Check for firmware updates for your AMPLIFi TT via the Line 6 website or app.
• Tone Matching Inaccurate:
  • Ensure the music file is properly recognized by the app.
  • Tone matching suggestions are community-driven; some may require personal adjustment. Use the app's editing features to fine-tune.

For further assistance, visit the official Line 6 support website or contact customer service.

6. Technical Specifications

7. Warranty and Support

For detailed warranty information and to register your product, please visit the official Line 6 website. Technical support and additional resources are also available through their online portal. Keep your proof of purchase for warranty claims.

Online Resources: Line 6 Official Store