Introduction
This manual provides essential information for the safe and proper use, assembly, operation, and maintenance of your Graco Glider LX Baby Swing. Please read all instructions carefully before assembly and use, and keep this manual for future reference.
The Graco Glider LX Baby Swing is designed to provide a soothing gliding motion, similar to being cradled in a nursery glider. It features a plush, roomy seat with head and body supports, adjustable recline, multiple gliding speeds, vibration settings, and built-in music and nature sounds to comfort your baby.
Important Safety Information
WARNING: Failure to follow these warnings and instructions could result in serious injury or death.
- Always use the restraint system.
- Never leave child unattended.
- Do not use this product if it is damaged or broken.
- Do not move or lift the product with the child in it.
- Discontinue use of the product when child attempts to climb out or reaches 30 lbs (13.6 kg), whichever comes first.
- Always place the product on a flat, level surface.
- Keep children away from the product during assembly and disassembly.
- Ensure all parts are correctly assembled and tightened before use.
- Do not use accessories or replacement parts other than those approved by Graco.
Components Overview
Familiarize yourself with the main components of your Graco Glider LX Baby Swing.
Setup and Assembly
Assembly is required for the Graco Glider LX Baby Swing. Refer to the included assembly guide for detailed step-by-step instructions. A small Phillips head screwdriver and an Allen wrench (included) may be required.
- Unpack all components and verify against the parts list in your assembly guide.
- Assemble the frame according to the instructions, ensuring all connections are secure.
- Attach the seat to the frame, making sure it clicks into place securely.
- Install the head and body supports into the seat.
- Attach the overhead toy bar.
- Insert 1 D battery for the vibration function (if desired).
- Plug the swing into a power outlet for gliding and sound functions.
Operating Instructions
The Graco Glider LX offers various settings to soothe and entertain your baby.
Gliding Speeds
The control panel on the side of the swing allows you to select from 6 gliding speeds. Press the speed buttons (1-6) to adjust the motion intensity. Start with a lower speed and increase as needed to find the most comforting pace for your baby.
Vibration Settings
The seat features a soothing vibration unit with 2 speed settings. This function requires 1 D battery (not included). To activate, locate the vibration unit on the front of the seat and slide the switch to the desired setting (low or high).
Music and Nature Sounds
The swing includes 10 classic melodies and 5 nature sounds. Use the music and sound buttons on the control panel to cycle through options and adjust the volume. There is also a timer function to set the duration of the sounds.
Maintenance
Regular maintenance ensures the longevity and safety of your Graco Glider LX Baby Swing.
- Cleaning Seat Cover: Refer to the care tag on your seat pad for specific washing instructions. Do not use bleach.
- Cleaning Frame: Use only household soap and warm water. Do not use bleach or detergent.
- General Inspection: Periodically check for loose screws, worn parts, or torn material/stitching. Replace or repair parts as needed using only Graco replacement parts.
- Sun/Heat Exposure: Excessive exposure to sun or heat can cause fading or warping of parts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Swing does not glide. | Not plugged in; power issue; motor malfunction. | Ensure the swing is properly plugged into a working outlet. Check for power outages. Contact Graco customer service if the motor is suspected to be faulty. |
| Vibration not working. | D battery is dead or incorrectly installed. | Replace the 1 D battery in the vibration unit. Ensure it is installed with correct polarity. |
| Music/sounds not playing. | Volume too low; incorrect setting. | Increase the volume using the control panel. Ensure a melody or nature sound is selected. |
| Swing makes unusual noises. | Loose parts; uneven surface. | Check all connections and tighten any loose screws. Ensure the swing is on a flat, level surface. |
Specifications
- Brand: Graco
- Model: 1925885
- Color: Affinia
- Product Dimensions: 30.7"D x 25.5"W x 36.1"H
- Frame Material: Alloy Steel
- Finish Type: Cushioned Fabric
- Assembly Required: Yes
- Manufacturer Maximum Age: 1.0 years
- Manufacturer Minimum Age (MONTHS): 1.0 months
- Item Weight: 17.9 pounds
- UPC: 047406130092
- Batteries: 1 D battery required for vibration (not included). Main swing functions are plug-in.
Warranty and Support
For warranty information, replacement parts, or further assistance, please contact Graco customer service. Details can typically be found on the product packaging or the official Graco website. Keep your proof of purchase for warranty claims.
Graco Official Website: www.gracobaby.com
