Graco Simple Sway Baby Swing Instruction Manual

Introduction

This manual provides important information for the safe assembly, operation, and maintenance of your Graco Simple Sway Baby Swing. Please read all instructions carefully before use and keep this manual for future reference.

Important Safety Instructions

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

• Never leave child unattended.
• Always use the restraint system.
• Do not use this product once your child can sit up unaided or attempts to climb out.
• This product is not intended for prolonged periods of sleep.
• Do not move or lift the product with the child inside.
• Always place the swing on a flat, level surface.
• Keep children away from the swing during assembly and disassembly.
• Do not use accessories or replacement parts other than those approved by Graco.
• Maximum weight capacity: 30 lbs (13.6 kg). Minimum weight: 5.5 lbs (2.5 kg).

Image: Weight limit for the Graco Simple Sway Baby Swing, showing it is suitable for infants weighing between 5.5 and 30 lbs.

Image: A baby secured in the swing, highlighting the 5-point harness and cozy head support for security and comfort.

Assembly Instructions

Assembly is required. Please follow these general steps. Refer to the detailed diagrams in your product packaging for specific part identification and connection points.

1. Unpack Components: Carefully remove all parts from the packaging. Verify all components are present according to the parts list (usually found in the included manual).
2. Assemble Base: Connect the base frame pieces. Ensure they click securely into place.
3. Attach Seat Frame: Secure the seat frame to the assembled base.
4. Install Seat Pad: Place the plush seat pad onto the seat frame, ensuring all straps and harness components are correctly aligned through the designated slots.
5. Attach Overhead Mobile: Secure the mobile arm to the main unit. Ensure it is firmly attached.
6. Power Connection: Insert 5 D batteries (not included) into the battery compartment or connect the AC adapter to a wall outlet.
7. Final Check: Before placing your child in the swing, ensure all connections are secure and the swing operates correctly.

Image: Dimensions of the Graco Simple Sway Baby Swing, illustrating its compact design.

Operating Instructions

The Graco Simple Sway Baby Swing offers multiple features to soothe and entertain your infant.

Powering the Swing

• The swing can be powered by 5 D batteries (not included) or by plugging the AC adapter into a standard wall outlet.
• Ensure the power source is securely connected before use.

Image: Illustrates the dual power options for the swing: batteries or wall plug-in.

Swing Motion and Speed

The swing provides a gentle side-to-side swaying motion.

• Use the speed control dial or buttons (refer to your unit's specific controls) to select one of the 6 swing speeds.
• Start with a low speed and adjust as needed to find the most comfortable pace for your baby.

Image: Demonstrates the gentle side-to-side swaying motion of the swing, designed to comfort and entertain.

Vibration Settings

The swing includes a soothing vibration feature.

• Activate the vibration feature using the dedicated button or switch.
• Select between 2 vibration speeds to further comfort your child.

Sounds and Melodies

The swing features a selection of sounds and melodies to create a calming environment.

• Choose from 10 classical melodies and 5 nature sounds.
• Adjust the volume using the volume control buttons.

Image: Overview of the swing's soothing capabilities, including multiple swing speeds, vibration settings, classical melodies, and nature sounds.

Mobile with Soft Toys

The overhead mobile includes 3 soft toys designed to provide visual stimulation and entertainment.

• Ensure the mobile is securely attached before use.
• Periodically check the toys for any signs of wear or damage.

Securing Your Child

Always use the 5-point harness to secure your child in the swing.

1. Place your child in the seat, ensuring their back is flat against the seat back.
2. Bring the shoulder straps over the child's shoulders and connect them to the buckle.
3. Bring the waist straps around the child's waist and connect them to the buckle.
4. Adjust all straps to ensure a snug but comfortable fit. The harness should be tight enough so you cannot pinch any excess webbing at the child's shoulder.

Care and Maintenance

Regular cleaning and maintenance will ensure the longevity and safe operation of your Graco Simple Sway Baby Swing.

Cleaning the Frame

• To clean the metal frame, use only household soap and warm water.
• Wipe the frame with a damp cloth and dry thoroughly.
• Do not use bleach or abrasive cleaners on the frame.

Cleaning the Seat Pad and Harness Covers

• Refer to the care tag located on your seat pad for specific washing instructions.
• Typically, seat pads can be machine washed on a delicate cycle with cold water.
• Do not use bleach on the seat pad or harness covers.
• Air dry or tumble dry on low heat as per care tag instructions.

Image: Care and maintenance instructions for the swing, detailing how to clean the seat pad and frame.

Storage

• When not in use, store the swing in a clean, dry place away from direct sunlight and extreme temperatures.
• If storing for an extended period, remove batteries to prevent leakage.

Troubleshooting

If you encounter issues with your Graco Simple Sway Baby Swing, refer to the following common problems and solutions:

Product Specifications

Video Guide

Watch the official product video for a visual guide on the features and operation of the Graco Simple Sway Baby Swing.

Warranty and Support

For detailed warranty information, product registration, or customer support, please visit the official Graco website or contact their customer service department. Contact information is typically provided in the product packaging or on the manufacturer's website.

Graco Website: www.gracobaby.com