1. Introduction
The Texas Instruments TI-30X2S is a versatile two-line scientific calculator designed for students and professionals. It features a two-line display, allowing you to view both the entry and the calculated result simultaneously. This manual provides detailed instructions on how to effectively use its various functions, from basic arithmetic to advanced scientific and statistical calculations.
Key features include: 102 functions, 5 variable memories, one and two variable statistics including linear regression, fraction and fraction/decimal conversions, and comprehensive trigonometric and logarithmic functions.

Figure 1: Front view of the Texas Instruments TI-30X2S Scientific Calculator, showing its two-line display and key layout.
2. Setup and Power Management
2.1 Battery Installation
The TI-30X2S calculator is powered by a battery (included). To install or replace the battery:
- Locate the battery compartment cover on the back of the calculator.
- Using a small Phillips head screwdriver, carefully remove the screw securing the cover.
- Remove the cover and insert the new battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Replace the cover and secure it with the screw.
2.2 Turning On and Off
- To turn the calculator ON, press the ON button.
- To turn the calculator OFF, press the 2nd button followed by the OFF button (usually located above the ON button).
3. Operating Instructions
3.1 Basic Arithmetic Operations
Perform addition, subtraction, multiplication, and division using the dedicated keys (+, -, x, ÷). Enter the first number, then the operator, the second number, and finally press = for the result.
3.2 Two-Line Display
The TI-30X2S features a two-line display. The top line shows the expression you are entering or have previously entered (up to 11 digits visible, scrollable for up to 88 digits). The bottom line displays the result of the calculation (10 digits).
3.3 Scientific Functions
Access scientific functions by pressing the function key directly or by pressing the 2nd key followed by the desired function key (for the secondary function printed above it).
- Trigonometry: Use SIN, COS, TAN for sine, cosine, and tangent. Inverse functions (SIN⁻¹, COS⁻¹, TAN⁻¹) are accessed via the 2nd key.
- Logarithms: Use LOG for common logarithm (base 10) and LN for natural logarithm (base e).
- Powers and Roots: Use x² for squaring, √ for square root, and ^ for general powers.
- Angle Modes: Toggle between Degrees (DEG) and Radians (RAD) using the DRG key. Ensure the correct mode is selected for trigonometric calculations.
3.4 Memory Functions
The calculator has 5 variable memories (A, B, C, D, E) to store and recall values.
- To store a value: Enter the value, press STO> (Store), then press the variable key (A, B, etc.).
- To recall a value: Press RCL (Recall), then press the variable key.
3.5 Fraction and Decimal Conversions
The calculator supports operations with fractions and conversion between fractions and decimals.
- To enter a fraction: Use the n/d key. For mixed numbers, enter the whole number, then 2nd, then n/d, then the numerator and denominator.
- To convert between fraction and decimal: Press the F↔D key.
3.6 Statistics
The TI-30X2S can perform one and two variable statistics, including linear regression and trend line analysis.
- To enter Statistics mode: Press DATA.
- Select 1-Var or 2-Var statistics.
- Enter your data points.
- Press STAT VAR to view statistical results (mean, standard deviation, etc.).
3.7 Entry Editing and Correction
You can view and edit previous and current entries using the arrow keys (▲, ▼, ◄, ►).
- Use ◄ and ► to move the cursor within an entry.
- Use DEL to delete a character at the cursor.
- Use INS (2nd + DEL) to insert a character.
- Press CLEAR to clear the current entry.
4. Maintenance and Care
4.1 Cleaning Your Calculator
To clean the calculator, use a soft, dry cloth. For stubborn marks, slightly dampen the cloth with water. Do not use harsh chemicals, abrasive cleaners, or immerse the calculator in water.
4.2 Battery Replacement
When the display becomes dim or the calculator behaves erratically, it may be time to replace the battery. Refer to section 2.1 for battery installation instructions.
4.3 Storage
Store your calculator in a cool, dry place, away from direct sunlight and extreme temperatures. Use the included slide case to protect the display and keys from scratches and damage.
5. Troubleshooting
5.1 Calculator Does Not Turn On
- Ensure the battery is correctly installed and not depleted. Replace if necessary.
- Press the ON button firmly.
5.2 Display Shows "ERROR"
- Syntax Error: You may have entered an invalid expression (e.g., missing parenthesis, incorrect operator placement). Press ◄ or ► to locate the error in the expression.
- Math Error: This occurs when the result of a calculation is mathematically undefined (e.g., division by zero, square root of a negative number).
- Overflow/Underflow Error: The result is too large or too small for the calculator to display.
- Press CLEAR to clear the error and start a new calculation.
5.3 Incorrect Results
- Check the angle mode (DEG or RAD) for trigonometric calculations.
- Verify that all numbers and operations were entered correctly.
- Ensure you are using the correct order of operations.
6. Specifications
| Feature | Detail |
|---|---|
| Model Name | TI-30X2S |
| Number of Functions | 102 |
| Display Type | Two-line LCD |
| Entry Line Digits | 11 (scrollable to 88) |
| Answer Line Digits | 10 |
| Memory Variables | 5 |
| Power Source | Battery Powered |
| Dimensions (W x H x D) | Approx. 3.25 inches W (Package Dimensions: 10 x 7.01 x 0.51 inches) |
| Weight | 6.72 ounces (approx.) |
7. Warranty and Support
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Texas Instruments website. Keep your proof of purchase for warranty claims.
Online Resources: For additional support, FAQs, and tutorials, visit the Texas Instruments education website.