Overview
This manual provides comprehensive instructions for setting up, operating, and maintaining your Solong Tattoo Complete Starter Tattoo Kit TK110. This kit is designed for beginners, learners, and tattoo artists, offering all necessary supplies for tattooing.
What's Included
Your Solong Tattoo Kit TK110 includes the following components:
- Tattoo machine gun (for liner and shader)
- Power supply
- Foot pedal
- Tattoo needles (various sizes)
- Grips
- Tips
- Tattoo inks (14 colors, including Pure Black)
- Practice skin
- Gloves
- Allen wrenches
- Rubber bands, grommets, O-rings
- Ink cups and holder
An overhead view of all components included in the Solong Tattoo Complete Starter Kit TK110, featuring the tattoo machine, power supply, foot pedal, various needles, ink bottles, practice skin, and accessories.
Setup Instructions
Follow these steps to assemble and connect your tattoo machine and power supply. For a visual guide, please refer to the setup video below.
- Unpacking: Carefully remove all components from the packaging.
- Machine Assembly:
- Attach the grip to the tattoo machine.
- Insert a suitable tattoo needle into the needle bar.
- Secure the needle bar to the armature bar using a rubber band.
- Place a grommet on the needle bar to ensure stable needle movement.
- Attach the appropriate tip to the grip.
- Power Supply Connection:
- Connect the power cord to the power supply unit.
- Plug the power cord into a suitable electrical outlet.
- Connect the clip cord to the tattoo machine (usually to the binding posts). Ensure the red clip is connected to the top binding post and the black clip to the bottom.
- Connect the foot pedal to the designated port on the power supply.
- Initial Check: Ensure all connections are secure before powering on.
An instructional video demonstrating the unboxing and assembly process for the Solong Tattoo Kit TK110, showing how to connect the machine, power supply, and foot pedal.
Operating Instructions
Before operating, ensure you have thoroughly cleaned and sterilized all reusable components and are working in a sterile environment.
- Power On: Turn on the power supply unit.
- Voltage Adjustment: Adjust the voltage using the dial on the power supply. Start with a lower voltage (e.g., 5-7V for lining, 7-10V for shading) and adjust as needed for optimal performance.
- Foot Pedal Activation: Press the foot pedal to activate the tattoo machine. Release to stop.
- Needle Depth: Ensure the needle depth is correctly set for your tattooing technique.
- Ink Preparation: Pour a small amount of desired ink into a clean ink cup.
- Practice: It is highly recommended to practice on the provided practice skin before tattooing on human skin.
Maintenance
Proper maintenance ensures the longevity and safe operation of your tattoo kit.
- Cleaning: After each use, thoroughly clean the machine, grips, and tips. Use appropriate sterilization solutions for reusable parts.
- Lubrication: Periodically lubricate moving parts of the tattoo machine as recommended by professional guidelines.
- Storage: Store all components in a clean, dry, and safe place away from direct sunlight and extreme temperatures.
- Needle Disposal: Always dispose of used needles in a designated sharps container.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Machine not working | Loose connections, incorrect voltage, contact screw not adjusted. | Check all cable connections (power, clip cord, foot pedal). Ensure the power supply is on and plugged in. Adjust the contact screw to ensure proper contact with the armature bar. Increase voltage if too low. |
| Ink appears faded or not depositing well | Incorrect needle depth, low voltage, poor ink quality. | Adjust needle depth. Increase voltage slightly. Ensure ink is not dried up or expired. |
| Machine running inconsistently | Loose grommet, worn rubber band, dirty components. | Replace grommet or rubber band. Clean the machine thoroughly, especially the armature bar and springs. |
Specifications
- Product Dimensions: 8.27 x 5.51 x 5.91 inches; 2.2 Pounds
- Item Model Number: TK102
- UPC: 701413860396
- Manufacturer: Solong Tattoo
- Color: black 19-3911tcx
- Size: 167 Piece Set
- Water Resistance Level: Water Resistant
Warranty and Support
Solong Tattoo offers support for their products. If you encounter any issues with your tattoo kit, including usage or product defects, please contact Solong Tattoo customer service. As per customer reviews, assistance is available within three years of purchase for machine-related problems.
For further assistance, you may refer to the official user manual PDF: Download User Manual (PDF)