Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your George Kovacs P470-617 1 Light Wall Sconce. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The George Kovacs P470-617 is a modern 1-light wall sconce featuring a bronze finish and an off-white linen shade, designed for indoor use. It is ETL approved for use in the US and Canada.
Important Safety Information
- Always turn off the power at the main fuse or circuit breaker box before beginning installation.
- Consult a qualified electrician if you are not familiar with electrical installations.
- Use only the specified bulb type and wattage to avoid fire or electrical shock hazards.
- Do not exceed the maximum wattage of 60 watts for the E26 A19 bulb.
- Ensure all connections are secure and properly insulated.
- This fixture is designed for indoor use only.
Package Contents
Verify that all components are present before discarding packaging materials:
- George Kovacs P470-617 Wall Sconce Fixture
- Off-White Linen Shade
- Mounting Hardware (P470-248)
- Instruction Manual
Note: Bulb(s) are not included and must be purchased separately.
Installation Instructions
The George Kovacs P470-617 wall sconce is designed for wall mount installation and requires no assembly. Follow these steps for a secure and proper installation:
- Prepare for Installation: Turn off power at the circuit breaker or fuse box. Clear the installation area.
- Mounting Bracket Installation: Secure the mounting bracket (part of P470-248) to the wall junction box using the provided screws. Ensure the bracket is firmly attached.
- Electrical Connections: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using wire nuts. Ensure all connections are tight and covered with electrical tape.
- Attach Fixture to Mounting Bracket: Carefully align the fixture with the mounting bracket and secure it with the provided screws. Ensure the fixture is flush against the wall.
- Install Bulb: Screw one E26 A19 bulb (max 60W) into the socket.
- Attach Shade: Place the off-white linen shade onto the fixture. The shade is U-shaped, open towards the wall.
- Restore Power: Turn the power back on at the circuit breaker.
Image 1: The George Kovacs P470-617 Wall Sconce, featuring a bronze base and an illuminated off-white linen shade. This image shows the overall design and light output.
Image 2: The George Kovacs P470-617 Wall Sconce installed on a textured wall, showcasing its modern aesthetic and how it casts light upwards and downwards.
Operating Your Sconce
- Power On/Off: The sconce is typically operated via a wall switch (push button type) connected to the electrical circuit.
- Bulb Requirements: This fixture uses one E26 A19 bulb. The maximum compatible wattage is 60 watts.
- Dimmable Feature: The sconce is dimmable when used with a compatible dimmable E26 A19 bulb and a suitable dimmer switch (sold separately).
- Light Output: The fixture provides approximately 960 lumens of light, offering a soft, ambient glow.
Maintenance
To maintain the appearance and functionality of your wall sconce, follow these simple cleaning guidelines:
- Cleaning the Fixture: Ensure power is off before cleaning. Wipe the metal parts with a soft, dry cloth. Avoid abrasive cleaners or solvents, as they may damage the finish.
- Cleaning the Shade: Gently dust the off-white linen shade with a soft brush or a lint-free cloth. For deeper cleaning, consult a professional or use a fabric-safe cleaner sparingly, testing on an inconspicuous area first.
- Bulb Replacement: Always turn off power before replacing the bulb. Allow the old bulb to cool completely before removal.
Troubleshooting
If you encounter issues with your George Kovacs P470-617 wall sconce, refer to the following common problems and solutions:
- Light Does Not Turn On:
- Check if the power is on at the circuit breaker.
- Ensure the bulb is screwed in tightly and is not burnt out. Replace if necessary.
- Verify all electrical connections are secure.
- Light is Too Dim or Too Bright:
- Ensure the correct wattage bulb (max 60W) is installed.
- If using a dimmer, ensure it is compatible with your bulb type and functioning correctly.
- Shade Appears Yellowish When Lit:
- The color temperature of certain LED bulbs can affect the appearance of the shade. Experiment with different bulb color temperatures (e.g., warmer or cooler white) to achieve the desired effect.
- Fixture Not Flush Against Wall:
- Ensure the mounting bracket is installed correctly and the fixture is properly aligned. Some designs may have screw placements that require careful adjustment for a flush fit.
- Shade Appears Uneven or Misaligned:
- Check the tapered plastic cone over the socket and the shade ring for proper seating. Minor adjustments may be needed to ensure the shade sits evenly.
Specifications
| Feature | Detail |
|---|---|
| Model Number | P470-617 |
| Brand | GEORGE KOVACS |
| Dimensions (L x W x H) | 4" x 7" x 11.25" |
| Item Weight | 1.25 pounds |
| Finish Type | Bronze |
| Shade Material | Fabric (Off-White Linen) |
| Light Source Type | Incandescent (compatible with LED) |
| Number of Light Sources | 1 |
| Bulb Base | E26 |
| Maximum Wattage | 60 Watts |
| Voltage | 120 Volts |
| Brightness | 960 Lumens |
| Special Feature | Dimmable |
| Installation Type | Wall Mount |
| Indoor/Outdoor Usage | Indoor |
| Certifications | ETL Approved (US and Canada) |
Warranty and Support
Manufacturer's Warranty: The George Kovacs P470-617 Wall Sconce comes with a 1-Year Limited Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use.
Product Support: For technical assistance, replacement parts, or warranty claims, please contact George Kovacs customer service. Refer to the product packaging or the official George Kovacs website for the most current contact information.
Please have your model number (P470-617) and proof of purchase available when contacting support.
