Introduction
This manual provides essential information for the proper use and care of your Briggs & Stratton 695951 Key. This key is a genuine Original Equipment Manufacturer (OEM) replacement part designed for specific Briggs & Stratton outdoor power equipment. Please read this manual thoroughly before installation and operation to ensure correct usage and to maintain the longevity of your equipment.
Important Compatibility Information
It is crucial to ensure this key is compatible with your specific equipment model before use. Many replacement parts may appear similar but are not interchangeable. Using an incorrect key can lead to damage to the ignition switch or prevent your equipment from operating correctly.
Warning: Many replacement parts look similar but will not fit your specific model. Always verify your equipment's model number to ensure compatibility before purchasing or attempting to use this key.
Setup and Installation
The Briggs & Stratton 695951 Key is designed for straightforward installation into compatible ignition switches. Follow these steps for proper installation:
- Locate the Ignition Switch: Identify the ignition switch on your Briggs & Stratton equipment. Ensure the equipment is turned off and any safety measures are in place.
- Insert the Key: Gently insert the 695951 key into the ignition switch slot. The key should slide in smoothly without resistance. Do not force the key.
- Verify Fit: The key should seat properly within the switch. If it does not, double-check your equipment's model number against the key's compatibility specifications.
Operating Instructions
Once the key is properly inserted, it can be used to operate your equipment's ignition system:
- Starting the Engine: Turn the key clockwise to the "START" position to engage the starter motor. Release the key once the engine starts; it will typically return to the "RUN" position automatically.
- Running the Engine: The key should remain in the "RUN" position while the equipment is in operation.
- Stopping the Engine: Turn the key counter-clockwise to the "OFF" position to shut down the engine. Remove the key when the equipment is not in use to prevent accidental starting and unauthorized operation.
Maintenance
The Briggs & Stratton 695951 Key requires minimal maintenance to ensure its functionality and longevity:
- Keep Clean: Periodically wipe the key with a clean, dry cloth to remove dirt, dust, or debris that could interfere with its operation.
- Storage: Store the key in a safe, dry place when not in use to prevent loss or damage. Avoid exposing it to extreme temperatures or corrosive substances.
- Avoid Damage: Do not use the key for purposes other than its intended function. Avoid bending, twisting, or applying excessive force, as this can damage the key or the ignition switch.
Troubleshooting
If you encounter issues with your Briggs & Stratton 695951 Key, consider the following:
- Key Does Not Insert Smoothly: Ensure you have the correct key for your equipment model. Do not force the key, as this can damage both the key and the ignition switch. Verify there are no obstructions in the ignition switch.
- Engine Does Not Start: If the key turns but the engine does not start, check other components of your equipment's starting system (e.g., battery charge, fuel level, spark plug condition, safety switches). This key is an ignition component, but other factors can prevent starting.
- Key Is Stuck or Hard to Turn: Inspect the ignition switch for any obstructions or damage. A small amount of graphite lubricant can sometimes help, but if the issue persists, consult a qualified technician to inspect the ignition switch.
Specifications
| Feature | Detail |
|---|---|
| Part Number | 695951 |
| Brand | Briggs & Stratton |
| Type | Genuine Original Equipment Manufacturer (OEM) Part |
| Item Weight | 0.64 ounces (18.14 g) |
| Product Dimensions | 1 x 7 x 8 inches (packaging) |
| Operation Mode | Mechanical |
| Finish Type | Powder Coated |
Warranty and Support
For warranty information or technical support regarding your Briggs & Stratton 695951 Key, please refer to the documentation provided with your original equipment or visit the official Briggs & Stratton website. As an OEM part, its warranty typically aligns with the equipment it is used with or standard replacement part policies.
For further assistance, you may contact Briggs & Stratton customer service or an authorized service dealer. Always provide your equipment's model and serial numbers when seeking support.
