Introduction
The LUXE Bidet NEO 185 is a non-electric bidet attachment designed to enhance personal hygiene and comfort. It features dual nozzles for rear and feminine wash, adjustable water pressure, and a self-cleaning function. This manual provides comprehensive instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your bidet.
Key Features
- Dual Wash Modes: Offers a stronger spray for rear wash and a softer, angled spray for feminine wash, suitable for monthly cycles and new/expecting mothers.
- Hygienic Protection: A guard gate shields the nozzles, which automatically retract after each use to maintain cleanliness.
- Adjustable Water Pressure: Easily control the water spray intensity to your preference.
- Non-Electric Operation: Connects directly to your existing cold water supply, requiring no electricity or batteries.
- Durable Construction: Built with high-quality parts, including metal-ceramic core valves and steel hoses, for reliability and longevity.
- Easy Installation: Designed for quick and simple DIY installation on most standard two-piece toilets.
Package Contents
Your LUXE Bidet NEO 185 package includes all necessary parts and tools for installation:
- LUXE Bidet NEO 185 Attachment
- Metal Braided Hose
- T-Adapter
- Installation Wrenches
- Owner's Manual
Figure 1: All parts included in the LUXE Bidet NEO 185 package.
Installation
Follow these steps for a quick and easy installation. No special tools are required beyond a screwdriver for removing your existing toilet seat.
Step 1: Prepare for Installation
- Turn off the toilet's water supply valve, typically located on the wall or floor behind the toilet.
- Flush the toilet to completely empty the tank.
- Remove the existing toilet seat by lifting the hinge tabs and unscrewing the toilet seat bolts.
Figure 2: Overview of the installation process.
Step 2: Attach the Bidet
- Place the LUXE Bidet attachment on the toilet bowl, aligning the adjustable plates with the toilet seat bolt holes.
- Reinstall your toilet seat on top of the bidet attachment and secure it with the original bolts. Ensure the bidet is centered and the seat is stable.
Figure 3: The bidet attachment positioned under the toilet seat.
Step 3: Connect Water Supply
- Disconnect the existing water supply hose from the toilet tank.
- Install the T-adapter onto the toilet tank's fill valve.
- Connect the original water supply hose to the bottom of the T-adapter.
- Connect the provided metal braided hose from the T-adapter to the bidet's water inlet. Hand-tighten all connections, then use the provided wrenches for a final quarter-turn to ensure no leaks.
- Slowly turn on the water supply valve and check for any leaks.
Operation
The LUXE Bidet NEO 185 features intuitive controls for a personalized cleaning experience.
Control Panel Overview
Figure 4: The control panel features a water pressure dial and a wash mode selector.
Wash Modes
- Rear Wash: Turn the mode dial to "REAR" for a standard posterior wash.
- Feminine Wash: Turn the mode dial to "FEMININE" for a softer, angled spray designed for anterior cleaning.
Figure 5: Visual representation of the different wash modes.
Adjusting Water Pressure
Use the water pressure dial to increase or decrease the intensity of the water spray. Start with a low setting and gradually increase to your preferred comfort level.
Maintenance
Nozzle Self-Cleaning
The NEO 185 includes a self-cleaning function for the nozzles. Turn the mode dial to "NOZZLE CLEAN" to rinse the nozzles with fresh water before or after use. The nozzles automatically retract behind a guard gate when not in use for added hygiene.
General Cleaning
Clean the exterior of the bidet attachment with a mild, non-abrasive cleaner and a soft cloth. Avoid harsh chemicals that could damage the finish. The bidet's design allows for easy access to clean the toilet bowl area underneath.
Troubleshooting
- No Water Spray: Ensure the water supply valve is fully open and all connections are secure. Check if the T-adapter is correctly installed.
- Leaking Connections: Tighten all connections firmly. If leaks persist, check the rubber washers for proper seating or damage.
- Weak Water Pressure: Verify that the water pressure dial is set to a higher intensity. Check your home's main water pressure.
- Nozzle Malfunction: Ensure the mode dial is correctly set for the desired wash or self-clean function.
For further assistance, refer to the contact information in the Warranty & Support section.
Specifications
| Feature | Detail |
|---|---|
| Model Number | NEO 185 |
| Dimensions | 17.4 x 3.8 x 7.1 inches |
| Item Weight | 2.05 pounds |
| Material | Plastic (ABS) with metal-ceramic core valves and steel hoses |
| Installation Method | Single Hole (attaches under toilet seat) |
| Special Features | Dual Function Sprayer (Rear & Feminine Wash), Self-Cleaning Nozzles, Adjustable Water Pressure |
| Power Source | Non-electric (water pressure operated) |
Warranty & Support
The LUXE Bidet NEO 185 comes with an 18-month warranty covering the bidet and its accessories. You can register your bidet online to potentially receive an extended warranty.
For customer support, installation questions, or concerns about your product, please contact the LUXE Bidet Customer Care team. Contact details are typically provided in the product packaging or on the official LUXE Bidet website.
Figure 6: LUXE Bidet offers world-class customer support via phone, email, and online guides.
