Laica Bi-Flux Water Filter Cartridge F0M Instruction Manual

Introduction

The Laica Bi-Flux water filter cartridge is designed to filter tap drinking water, improving its taste and reducing the presence of certain unwanted substances. This manual provides essential information for the proper setup, operation, and maintenance of your Laica Bi-Flux filter cartridge.

Image: Overview of the Laica Bi-Flux filter cartridge packaging.

Product Benefits

• Filters tap drinking water to improve taste.
• Reduces chlorine content.
• Decreases limescale.
• Minimizes heavy metals.
• Reduces herbicides and pesticides.
• Compatible with various Laica jug models: Clear line, Stream Line, Light Graffiti, Big Firenze, and Carmen Aida.
• Also compatible with Brita Maxtra filters.

Setup and Installation

1. Unpack the Filter: Carefully remove the Laica Bi-Flux filter cartridge from its polyethylene bag.
2. Prepare the Filter: Before first use, immerse the filter cartridge completely in cold water for approximately 15 minutes. Gently shake it to remove any air bubbles. This step helps activate the filter media.
3. Insert into Jug: Place the prepared filter cartridge firmly into the designated compartment of your compatible Laica water filter jug (e.g., Clear line, Stream Line, Light Graffiti, Big Firenze, Carmen Aida) or Brita Maxtra compatible jug. Ensure it is seated correctly to prevent unfiltered water from bypassing the cartridge.
4. Initial Filtration: Fill the jug with tap water. Discard the first two filtered batches of water. This primes the filter and removes any loose carbon particles. The third batch of filtered water is ready for consumption.

Image: Laica Bi-Flux filter cartridge, showing its design for easy insertion into a water filter jug.

Operating Instructions

Once the filter cartridge is installed and primed, simply fill your water filter jug with tap water. The water will pass through the Bi-Flux filter, and the filtered water will collect in the lower reservoir of the jug, ready for use.

• Always use cold tap water for filtration.
• Do not filter hot water through the cartridge.
• Store filtered water in a cool, dark place or in the refrigerator.

Image: A close-up view of the Laica Bi-Flux filter cartridge, illustrating its functional design.

Maintenance and Replacement

For optimal performance and water quality, the Laica Bi-Flux filter cartridge must be replaced regularly.

• Replacement Schedule: Replace the filter cartridge after 30 days of use or after filtering 150 liters of water, whichever comes first.
• Disposal: Dispose of used filter cartridges according to local regulations for household waste.
• Cleaning: The filter cartridge itself is not washable. Clean your water filter jug regularly according to its own instructions.

Image: Example of Laica Bi-Flux filter cartridges available in multi-packs for convenient replacement.

Troubleshooting

Specifications

Image: Laica Bi-Flux filter cartridge showing approximate dimensions.

Support and Further Information

For additional support, product information, or to explore other Laica products, please visit the official Laica store.

Visit the Laica Store