H.Koenig STW25 Programmable Coffee Machine User Manual

1. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

• Read all instructions before operating the appliance.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electric shock, do not immerse cord, plugs, or the coffee maker in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Contact customer service for examination, repair, or adjustment.
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
• Do not use appliance for other than intended household use.
• Scalding may occur if the lid is removed during the brewing cycles.

2. Product Overview

Familiarize yourself with the components of your H.Koenig STW25 coffee machine.

Image: Front view of the H.Koenig STW25 coffee machine with the stainless steel thermos carafe in place.

Components:

• Control Panel: Includes ON/OFF, HOUR, MIN, PROG buttons, and an LCD display.
• Water Reservoir: With a transparent water level indicator.
• Filter Basket: Removable and washable for easy cleaning.
• Permanent Filter: Reusable filter for ground coffee.
• Thermos Carafe: 1.5L insulated stainless steel carafe to keep coffee warm.
• Measuring Scoop: For accurate coffee measurement.

Image: The H.Koenig STW25 coffee machine shown with its separate thermos carafe and measuring scoop.

Image: A close-up view of the control panel, highlighting the LCD display and function buttons (ON/OFF, HOUR, MIN, PROG).

3. Setup and First Use

Unpacking:

1. Carefully remove all components from the packaging.
2. Remove any stickers or promotional materials from the appliance.

Initial Cleaning Cycle:

Before brewing coffee for the first time, it is recommended to run a cleaning cycle to remove any manufacturing residues.

1. Wash the thermos carafe, its lid, the filter basket, and the permanent filter in warm, soapy water. Rinse thoroughly and dry.
2. Wipe the exterior of the coffee maker with a damp cloth.
3. Fill the water reservoir to the maximum level with cold water.
4. Place the permanent filter (or a paper filter) into the filter basket. Do not add coffee.
5. Close the lid securely and place the empty thermos carafe on the warming plate.
6. Press the "ON/OFF" button to start a full brewing cycle.
7. Once the cycle is complete, discard the water from the carafe.
8. Repeat this process 2-3 times with fresh water to ensure thorough cleaning.

4. Operating Instructions

Setting the Clock:

1. Plug the coffee maker into a power outlet. The LCD display will show "12:00".
2. Press the "HOUR" button repeatedly to set the current hour.
3. Press the "MIN" button repeatedly to set the current minutes.
4. The clock is now set.

Brewing Coffee (Manual):

1. Open the lid of the water reservoir and fill with the desired amount of cold water. Use the transparent water level indicator on the side. Do not exceed the MAX line.
2. Place the permanent filter (or a paper filter) into the filter basket.
3. Add the desired amount of ground coffee to the filter. A general guideline is one level measuring scoop (provided) per cup, adjust to your taste.
4. Close the lid securely.
5. Place the empty thermos carafe on the warming plate. Ensure it is correctly seated to activate the anti-drip mechanism.
6. Press the "ON/OFF" button. The "RUN" indicator light will illuminate, and the brewing process will begin.
7. The anti-drip function allows you to temporarily remove the carafe during brewing to pour a cup. Replace the carafe within 30 seconds to prevent overflow.
8. Once brewing is complete, the coffee maker will automatically shut off after approximately 2 hours to save energy.

Programming Delayed Brewing:

This feature allows you to set a specific time for the coffee maker to start brewing automatically.

1. First, ensure the current time is set correctly (see "Setting the Clock" above).
2. Press the "PROG" button. The display will show "PROG" and "12:00" (or the last programmed time).
3. Press the "HOUR" button repeatedly to set the desired hour for brewing to start.
4. Press the "MIN" button repeatedly to set the desired minutes for brewing to start.
5. Press the "PROG" button again to confirm the programmed time. The "AUTO" indicator light will illuminate, indicating that the delayed brew function is active.
6. Prepare the coffee maker with the desired amount of water and ground coffee as you would for manual brewing.
7. Ensure the thermos carafe is correctly placed on the warming plate.
8. At the programmed time, the coffee maker will automatically start brewing. The "AUTO" light will turn off, and the "RUN" light will illuminate.

5. Maintenance and Cleaning

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your coffee machine.

Daily Cleaning:

1. Always unplug the coffee maker from the power outlet and allow it to cool completely before cleaning.
2. Remove the filter basket and permanent filter. Discard used coffee grounds.
3. Wash the thermos carafe, its lid, the filter basket, and the permanent filter in warm, soapy water. Rinse thoroughly and dry. These parts are not dishwasher safe.
4. Wipe the exterior of the coffee maker with a soft, damp cloth. Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the finish.
5. Never immerse the main body of the coffee maker in water or any other liquid.

Descaling:

Mineral deposits (limescale) can build up inside your coffee maker over time, affecting brewing performance and coffee taste. Descale your appliance regularly, especially if you live in an area with hard water.

1. Prepare a descaling solution. A common solution is a mixture of white vinegar and water (e.g., 1 part white vinegar to 2 parts water).
2. Pour the descaling solution into the water reservoir up to the MAX line.
3. Place the empty thermos carafe on the warming plate.
4. Run a full brewing cycle with the descaling solution (without coffee).
5. After the cycle is complete, turn off the coffee maker and let the solution sit in the carafe for 15-20 minutes to allow it to work on stubborn deposits.
6. Discard the descaling solution from the carafe and rinse the carafe thoroughly.
7. Fill the water reservoir with clean, cold water and run 2-3 full brewing cycles to rinse the internal components and remove any residual vinegar taste.

6. Troubleshooting

If you encounter issues with your coffee machine, refer to the following common problems and solutions:

7. Specifications

8. Warranty and Support

No specific warranty information is provided in the product data. For detailed warranty terms and conditions, please refer to the documentation included with your purchase or contact the retailer.

For technical support, spare parts, or any inquiries regarding your H.Koenig STW25 coffee machine, please visit the official H.Koenig website or contact their customer service department using the contact information provided with your product.