URC Clikr-5 Time Warner Cable Remote Control User Manual

Introduction

This manual provides comprehensive instructions for the URC Clikr-5 Time Warner Cable Remote Control (Model UR5U-8780L). Designed for seamless control of your cable or satellite box and other entertainment devices, this remote features an ergonomic design for comfortable handling and reliable infrared technology. Please read this manual thoroughly to ensure proper setup and operation of your remote control.

Figure 1: The URC Clikr-5 Time Warner Cable Remote Control. This image shows three identical remote controls, highlighting their ergonomic design and button layout. The remote is black with grey buttons, featuring dedicated controls for system power, channel, volume, navigation, and playback functions.

Setup

1. Battery Installation

The URC Clikr-5 remote requires two AA batteries for operation.

1. Locate the battery compartment cover on the back of the remote control.
2. Slide the cover downwards to open the compartment.
3. Insert two AA batteries, ensuring the positive (+) and negative (-) terminals align with the indicators inside the compartment.
4. Slide the battery compartment cover back into place until it clicks securely.

2. Initial Programming

To control your devices, the remote must be programmed. While specific programming codes are not provided in this manual, the general procedure involves entering a code specific to your device (TV, Cable Box, DVD, etc.) or using an auto-search function. Refer to your cable provider's documentation or the URC website for detailed programming instructions and device codes.

General Programming Steps (may vary):

1. Turn on the device you wish to program (e.g., your TV or cable box).
2. Press and hold the CODE SET button (if available) or the specific device button (e.g., TV, CBL) until the indicator light on the remote illuminates.
3. Enter the 3, 4, or 5-digit code for your device. The indicator light should blink and then turn off if the code is accepted.
4. Test the remote by pressing the POWER button. If the device turns off, the programming was successful. If not, try another code or the auto-search method.

Operating Instructions

The URC Clikr-5 remote is designed for intuitive control of your Time Warner Cable system and other compatible devices. Below is a guide to the primary functions of the remote's buttons.

• SYSTEM ON/OFF: Controls the power for the selected system (e.g., Cable Box).
• POWER: Controls the power for the currently active device (e.g., TV).
• AUX, DVD, VCR, TV, CBL: Device selection buttons. Press to switch control to the corresponding device.
• GUIDE: Displays the program guide.
• MENU: Accesses the main menu of the selected device.
• INFO: Displays information about the current program or selected item.
• EXIT: Exits menus or guides.
• SETTINGS: Accesses device settings.
• Navigation Pad (OK/SEL, Up, Down, Left, Right): Used to navigate through menus and select options. OK/SEL confirms selections.
• PAGE +/- (PAGE UP/DOWN): Scrolls through pages in guides or menus.
• VOL +/- (Volume Up/Down): Adjusts the volume.
• CH +/- (Channel Up/Down): Changes channels.
• MUTE: Mutes or unmutes the audio.
• LAST: Returns to the previously viewed channel.
• DAY +/-: Navigates through days in the program guide.
• ON Demand: Accesses On Demand content.
• LIST: Displays recorded programs or a list of channels.
• LIVE: Returns to live television.
• REW (Rewind), PLAY, FF (Fast Forward), STOP, PAUSE, REC (Record): Standard media playback controls.
• Number Pad (0-9): Directly enters channel numbers or menu selections.
• *: Special function key, often used for specific features or text input.
• #: Special function key, often used for specific features or text input.
• LIGHT: Activates the remote's backlight (if available).
• SOURCE: Cycles through input sources on your TV.

Maintenance

Proper maintenance will extend the life of your URC Clikr-5 remote control.

Cleaning

To clean the remote, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive materials, as they can damage the remote's finish or buttons. Avoid getting moisture into the battery compartment or around the buttons.

Battery Replacement

Replace the batteries when the remote's indicator light becomes dim or the remote becomes unresponsive. Always replace both AA batteries at the same time with new ones. Dispose of old batteries according to local regulations.

Troubleshooting

If you encounter issues with your URC Clikr-5 remote, try the following troubleshooting steps:

• Remote Not Responding:
  • Check if the batteries are correctly inserted and have sufficient charge. Replace them if necessary.
  • Ensure there is a clear line of sight between the remote's infrared emitter and the device's receiver. Obstructions can block the signal.
  • Verify that you have selected the correct device mode (e.g., TV, CBL) on the remote.
• Device Not Responding to Commands:
  • Re-program the remote for the specific device. The programming code might be incorrect or corrupted.
  • Ensure the device itself is powered on and functioning correctly.
• Limited Range:
  • Replace the batteries with fresh ones. Low battery power can reduce the remote's effective range.
  • Ensure no strong light sources (like direct sunlight or fluorescent lights) are interfering with the infrared signal.
• Certain Buttons Not Working:
  • This could indicate a specific button malfunction or a programming issue. Try re-programming the remote. If the issue persists, the remote may require replacement.

Specifications

Warranty and Support

The URC Clikr-5 Time Warner Cable Remote Control is manufactured by URC. For information regarding warranty coverage, technical support, or to obtain specific programming codes for your devices, please refer to the official URC website or contact their customer support directly.

Please retain your proof of purchase for any warranty claims.