1. Introduction
This manual provides instructions for the safe and effective use of your Westcott E-14216 00 Manual Pencil Sharpener. This device is designed to sharpen pencils with a diameter ranging from 7mm to 12mm. It features a durable construction and includes a tension clamp for secure table fixture, ensuring stability during operation.
Figure 1: Westcott E-14216 00 Manual Pencil Sharpener, showing the main unit with a pencil inserted.
2. Setup
- Unpacking: Carefully remove the pencil sharpener from its packaging. Inspect for any damage.
- Table Fixture (Optional): For enhanced stability, the sharpener can be secured to a table or desk using the integrated tension clamp.
- Locate the tension clamp on the sharpener's base.
- Pull the clamp lever outwards to open the clamp.
- Position the sharpener on the edge of a table.
- Push the clamp lever inwards to secure the sharpener firmly to the table surface. Ensure it is stable before use.
Figure 2: Side view of the sharpener, illustrating the table tension clamp mechanism.
3. Operating Instructions
Follow these steps to sharpen your pencils:
- Select Pencil Diameter: The sharpener accommodates pencils with diameters from 7mm to 12mm. Ensure your pencil fits comfortably into the sharpening aperture.
- Insert Pencil: Gently insert the pencil into the sharpening hole on the front of the unit. Push the pencil firmly until it engages with the internal sharpening mechanism.
- Sharpening: While holding the pencil steady, turn the crank handle clockwise. Continue turning until you feel less resistance and the pencil is sharpened to your desired point. The sharpener is designed to stop cutting when the pencil reaches an optimal point, preventing over-sharpening.
- Remove Pencil: Pull the pencil straight out from the sharpening hole.
Figure 3: The pencil sharpener positioned on a desk, demonstrating typical usage with various pencils.
4. Maintenance
Regular maintenance ensures optimal performance and longevity of your sharpener.
- Emptying Shavings Tray: The transparent shavings tray should be emptied regularly to prevent clogging.
- Gently pull the transparent tray located at the bottom front of the sharpener to remove it.
- Discard the pencil shavings into a waste bin.
- Slide the tray back into its position until it clicks securely.
- Cleaning: Wipe the exterior of the sharpener with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
Figure 4: Front view of the sharpener, highlighting the transparent shavings collection tray.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pencil not sharpening or sharpening poorly. |
|
|
| Pencil lead breaks frequently. |
|
|
| Sharpener slides on table during use. | Table clamp not properly secured. | Ensure the tension clamp is fully engaged and tightened to the table surface. |
6. Specifications
- Model: E-14216 00
- Brand: Westcott
- Pencil Diameter Compatibility: 7mm to 12mm
- Color: Black
- Power Source: Manual
- Material: Durable plastic (Note: 'Papel' in source data appears to be an error; product is typically plastic)
- Item Weight: 3.17 ounces (approx. 90 grams)
- Product Dimensions: 4.61 x 4.37 x 2.56 inches (approx. 11.7 x 11.1 x 6.5 cm)
- Manufacturer: Acme United
7. Warranty and Support
For warranty information or technical support, please refer to the manufacturer's official website or contact their customer service department. Keep your purchase receipt for any warranty claims.
Manufacturer: Acme United
Brand Website: Visit the Westcott Store on Amazon
