Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Philips 33361 65K 6-Watt LED Ceiling Lamp. Please read these instructions carefully before installation and retain them for future reference.
Figure 1: The Philips 33361 65K 6-Watt LED Ceiling Lamp, a white, circular fixture designed for ceiling installation.
Safety Information
- Ensure power is disconnected at the main circuit breaker before installation or maintenance.
- Installation should be performed by a qualified electrician in accordance with local electrical codes.
- Do not attempt to modify the lamp. Any modifications may void the warranty and pose safety risks.
- This product is designed for indoor use in dry locations unless otherwise specified.
- Avoid direct eye exposure to the light source when illuminated.
Package Contents
Verify that all components are present before beginning installation:
- 1 x Philips 33361 65K 6-Watt LED Ceiling Lamp
- Mounting hardware (screws, anchors)
- Instruction Manual (this document)
Setup and Installation
- Preparation: Turn off power at the circuit breaker to the area where the lamp will be installed.
- Mounting Location: Select a suitable ceiling location. Ensure the mounting surface can support the weight of the lamp.
- Attach Mounting Bracket: Secure the mounting bracket to the ceiling using the provided screws and anchors. Ensure it is firmly attached.
- Electrical Connection: Connect the electrical wires from the ceiling to the lamp's terminals. Typically, this involves connecting live (L), neutral (N), and ground (GND) wires. Refer to local wiring codes for correct color identification. Ensure connections are secure.
- Secure Lamp: Carefully align the lamp with the mounting bracket and secure it in place. Follow the specific mechanism for your model (e.g., twist-lock, screws).
- Restore Power: Once the lamp is securely installed and all connections are checked, restore power at the circuit breaker.
Figure 2: The Philips 33361 LED Ceiling Lamp providing illumination in a modern office environment.
Operating Instructions
The Philips 33361 LED Ceiling Lamp operates via a standard wall switch connected to the electrical circuit. No special controls are required.
- Turning On/Off: Use the wall switch to turn the lamp on or off.
- Energy Efficiency: This LED lamp is designed for energy-saving operation.
Figure 3: The Philips 33361 LED Ceiling Lamp illuminating a bedroom, demonstrating its suitability for various indoor spaces.
Maintenance
The Philips 33361 LED Ceiling Lamp requires minimal maintenance.
- Cleaning: Disconnect power before cleaning. Wipe the lamp with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
- LED Longevity: The integrated LED light source is designed for long life and is not user-replaceable.
- Inspection: Periodically inspect the lamp for any signs of damage or loose connections. If damage is observed, disconnect power and consult a qualified electrician.
Figure 4: The Philips 33361 LED Ceiling Lamp providing light on an outdoor balcony, highlighting its versatile application.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. | No power supply. Loose wiring connection. Faulty wall switch. | Check circuit breaker. Ensure wall switch is ON. Verify wiring connections (with power off). Test wall switch. |
| Light flickers. | Loose wiring connection. Incompatible dimmer switch (if applicable, though this model is not specified as dimmable). | Check wiring connections (with power off). Ensure no dimmer switch is used unless specified as compatible. |
| Lamp is damaged. | Physical impact. Electrical surge. | Disconnect power immediately. Do not use. Contact customer support for warranty information. |
If troubleshooting steps do not resolve the issue, contact Philips customer support.
Specifications
| Brand | Philips |
| Model Number | 33361 (Part Number: 6947830423422) |
| Type | LED Ceiling Lamp |
| Wattage | 6 Watts |
| Light Source Type | LED |
| Color Temperature | 6500 Kelvin (Cool White) |
| Material | Metal |
| Color | White |
| Dimensions (LxWxH) | 7.8 cm x 25 cm x 25.5 cm |
| Item Weight | 0.25 Kilograms (250 g) |
| Installation Type | Ceiling Mount |
| Power Source | Corded Electric |
| Special Feature | Energy Efficient |
| Included Components | 1 Ceiling Lamp |
Warranty Information
The Philips 33361 65K 6-Watt LED Ceiling Lamp comes with a 2-year warranty from the date of invoice. This warranty covers manufacturing defects and material faults under normal use conditions.
The warranty does not cover:
- Damage caused by improper installation or misuse.
- Damage caused by unauthorized repairs or modifications.
- Damage due to accidents, neglect, or natural disasters.
- Normal wear and tear.
Please retain your purchase receipt as proof of purchase for warranty claims.
Support and Contact
For technical assistance, warranty claims, or further information regarding your Philips product, please contact Philips customer support.
You can find contact details on the official Philips website or through your local retailer.
Manufacturer: Signify Innovations India Limited
Address: Signify Innovations India Ltd, PS Arcadia Central, 3A, 3rd Floor, 4A, Abanindranath Thakur Sarani(Camac Street), Kolkata-700017, West Bengal, India
