Product Overview
The Marshall Mode EQ headphones deliver powerful audio in a compact design. Featuring custom drivers for high-output sound with minimal distortion, and a unique in-ear design for a comfortable and secure fit. The integrated EQ switch on the remote allows for sound customization.
Image: An overview of the Marshall Mode EQ headphones, highlighting the black earbuds with gold 'M' logo, the inline remote, and the L-shaped 3.5mm audio jack.
Setup
Ear Tip Selection and Fit
The Marshall Mode EQ headphones come with multiple ear tip sizes to ensure optimal sound quality and comfort. Proper fit is crucial for achieving the intended audio performance and call clarity.
Image: Close-up of a single Marshall Mode EQ earbud, showing the 'L' (left) indicator and the silicone ear tip.
- Select the ear tips that provide the most snug and comfortable fit in your ear canals. Experiment with different sizes (small, medium, large, extra-large) to find the best seal.
- Gently insert each earbud into the corresponding ear (Left for 'L', Right for 'M' logo) until it feels secure and comfortable.
- Adjust the earbuds slightly to ensure a proper seal, which will enhance bass response and noise isolation.
Connecting to Your Device
The Mode EQ headphones connect via a standard 3.5mm audio jack.
Image: Detail of the durable L-shaped 3.5mm audio jack, designed to prevent cable damage.
- Locate the 3.5mm headphone jack on your audio device (smartphone, tablet, laptop, etc.).
- Insert the L-shaped 3.5mm plug of the headphones firmly into the device's headphone jack.
- Ensure the connection is secure to prevent audio interruptions.
Operating Instructions
Inline Remote Control
The Marshall Mode EQ features an inline remote with a microphone and an EQ switch for convenient control of your audio and calls.
Image: The inline remote control of the Marshall Mode EQ headphones, featuring the Marshall logo, a button, and the EQ switch.
| Action | Function |
|---|---|
| Single Press | Play/Pause music, Answer/End call |
| Double Press | Skip to next track |
| Triple Press | Go to previous track |
| Press and Hold | Activate voice assistant (if supported by device) |
EQ Switch
The Mode EQ headphones feature a unique EQ switch on the inline remote, allowing you to instantly switch between two distinct sound profiles:
- EQ 1 (Bass-Heavy): Provides a warm sound with deep, rich bass, ideal for genres like rock, hip-hop, and electronic music.
- EQ 2 (Balanced): Offers a more balanced sound profile with crisp mids and clear highs, suitable for acoustic, classical, and vocal-centric music.
To switch between EQ modes, simply slide the small switch located on the side of the inline remote.
Maintenance
To ensure the longevity and optimal performance of your Marshall Mode EQ headphones, follow these maintenance guidelines:
- Cleaning: Regularly wipe the earbuds and cable with a soft, dry cloth. For ear tips, remove them and clean with mild soap and water, then dry thoroughly before reattaching.
- Storage: When not in use, store your headphones in a clean, dry place. Avoid extreme temperatures and direct sunlight. The tangle-resistant cable helps prevent knots, but gentle coiling is recommended.
- Cable Care: Avoid sharp bends or excessive pulling on the cable, especially near the connectors and earbuds, to prevent internal wire damage. The L-shaped jack is designed for durability, but proper handling is still important.
- Ear Tip Replacement: If ear tips become worn or lost, use only genuine Marshall replacement tips to maintain sound quality and fit.
Troubleshooting
If you encounter issues with your Marshall Mode EQ headphones, refer to the following common solutions:
| Problem | Solution |
|---|---|
| No sound or low volume | Ensure the 3.5mm jack is fully inserted into your device. Check the volume level on your device and ensure it's not muted. Test with another audio source or device to rule out device issues. Clean the ear tips and ensure they are properly seated on the earbuds. |
| Distorted sound | Lower the volume on your device. Ensure the ear tips are clean and properly fitted. Test with another audio source. |
| Microphone not working | Ensure the 3.5mm jack is fully inserted. Check your device's settings to ensure the correct microphone input is selected. Test the microphone with another application or device. |
| Earbuds falling out | Experiment with different ear tip sizes to find a more secure fit. Ensure the earbuds are inserted correctly into your ear canal. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | 04090940 |
| Connectivity Technology | Wired |
| Headphones Jack | 3.5 mm Jack |
| Frequency Range | 20 Hz - 20,000 Hz |
| Control Type | Remote (with EQ switch) |
| Microphone | Yes |
| Cable Feature | Retractable, Tangle-resistant |
| Material | Brass accents |
| Item Weight | 0.564 ounces |
| Dimensions | 7.28 x 3.82 x 2.05 inches (packaging) |
Official Product Video
Watch this video for a detailed review and demonstration of the Marshall Mode EQ in-Ear Headphones.
Video: A comprehensive review of the Marshall Mode EQ in-Ear Headphones, covering features, design, and sound quality. (Source: AudioProWork)
Warranty and Support
For warranty information and customer support, please refer to the official Marshall website or the documentation included with your product.
You can also find additional support and frequently asked questions on the Marshall Store on Amazon.
A PDF user manual is also available for download: Download User Manual (PDF).
