1. Introduction
This manual provides essential information for the safe and proper installation, operation, and maintenance of the Goodman 0130M00138 Transformer. This component is designed to convert a 208/230V AC input to a 24V AC output, typically used in HVAC (Heating, Ventilation, and Air Conditioning) systems for control circuits.
Please read this manual thoroughly before attempting any installation or service to ensure personal safety and optimal product performance.
2. Safety Information
WARNING: Electrical shock hazard. Improper installation or maintenance can result in serious injury or death. All electrical work should be performed by a qualified and licensed electrician or HVAC technician.
- Always disconnect all power to the HVAC unit and the transformer before installation, maintenance, or troubleshooting.
- Verify the input voltage matches the transformer's specifications (208/230V AC).
- Ensure all wiring connections are secure and comply with local and national electrical codes.
- Do not operate the transformer if it appears damaged.
- Wear appropriate personal protective equipment (PPE), including insulated gloves and safety glasses.
3. Product Overview
The Goodman 0130M00138 is a robust power transformer designed for reliable voltage reduction in various HVAC applications. It steps down higher line voltages (208V or 230V) to a safe and usable 24V, which is commonly required for thermostats, control boards, relays, and other low-voltage components within heating and cooling systems.
This transformer is built to meet industry standards, including UL and cUL certifications, ensuring safety and performance.

Figure 1: Goodman 0130M00138 Transformer. This image shows the compact design of the transformer with its various wiring terminals.
4. Setup and Installation
Installation should only be performed by qualified personnel. Ensure all power is disconnected before proceeding.
4.1 Pre-Installation Checks
- Confirm the new transformer matches the specifications of the original part, if replacing.
- Inspect the transformer for any visible damage from shipping.
- Gather necessary tools: screwdriver set, wire strippers, multimeter, electrical tape, wire nuts.
4.2 Mounting
The Goodman 0130M00138 Transformer features an RM (Rack Mount or Panel Mount) type mounting. Secure the transformer firmly to a stable surface within the HVAC unit, ensuring it does not obstruct other components or airflow. Use appropriate fasteners for the mounting holes provided.
4.3 Wiring Instructions
- Disconnect Power: Turn off the main power supply to the HVAC system at the circuit breaker. Verify with a multimeter that no voltage is present.
- Identify Wires: Carefully identify the high voltage input wires (208V/230V) and the low voltage output wires (24V) from your HVAC system. Refer to your HVAC unit's wiring diagram.
- Connect Input: Connect the 208V/230V AC input wires to the primary terminals of the transformer. Ensure correct voltage matching (e.g., if your system is 230V, connect to the 230V primary tap).
- Connect Output: Connect the 24V AC output wires from the transformer's secondary terminals to the control circuit of your HVAC system.
- Secure Connections: Use wire nuts or appropriate connectors to secure all connections. Ensure no bare wires are exposed.
- Verify: Double-check all wiring against the HVAC unit's schematic and the transformer's labeling.
- Restore Power: Once all connections are secure and verified, restore power to the HVAC system.
5. Operation
The Goodman 0130M00138 Transformer operates passively. Once correctly installed and powered, it continuously converts the higher input voltage (208V/230V) to the required 24V for the HVAC control circuits. There are no user-adjustable settings or controls on the transformer itself.
After installation, verify the output voltage using a multimeter to ensure it is within the expected 24V range before fully operating the HVAC system.
6. Maintenance
The Goodman 0130M00138 Transformer requires minimal maintenance. Regular inspections are recommended as part of routine HVAC system servicing.
- Visual Inspection: Periodically check the transformer for any signs of overheating (discoloration), physical damage, or loose connections.
- Cleanliness: Ensure the transformer is free from dust, dirt, and debris, which can impede heat dissipation. Use a soft, dry brush or compressed air for cleaning.
- Connection Integrity: With power disconnected, gently check all wire connections to ensure they remain tight and secure.
7. Troubleshooting
If your HVAC control circuit is not receiving power, or if the system is malfunctioning, consider the following troubleshooting steps. Always disconnect power before inspecting components.
| Problem | Possible Cause | Solution |
|---|---|---|
| No 24V output from transformer |
|
|
| Transformer humming loudly or overheating |
|
|
If troubleshooting steps do not resolve the issue, contact a qualified HVAC technician or Goodman customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Goodman |
| Model Number | 0130M00138 |
| Input Voltage | 208V / 230V AC |
| Output Voltage | 24V AC |
| Product Dimensions | 4 x 4 x 2 inches |
| Item Weight | 1.35 pounds |
| Mounting Type | RM (Rack Mount / Panel Mount) |
| Certifications | UL, cUL |
| Power Source | Corded Electric |
9. Warranty and Support
Goodman products are manufactured to high-quality standards and typically come with a manufacturer's warranty. For specific warranty details pertaining to your Goodman 0130M00138 Transformer, please refer to the documentation included with your purchase or visit the official Goodman website.
For technical support, replacement parts, or further assistance, please contact Goodman customer service or a certified Goodman dealer. You can find more information and contact details on the Goodman Brand Store on Amazon or the official Goodman website.