Introduction
This manual provides essential instructions for the safe assembly, operation, and maintenance of your Delta Children Disney Cars Plastic Toddler Bed. Please read all instructions carefully before assembly and use. Keep this manual for future reference.
Safety Information
WARNING: Failure to follow these warnings and instructions could result in serious injury or death.
- Always ensure all parts are securely fastened before use. Periodically check and tighten all screws and bolts.
- Do not use this bed if any parts are missing, damaged, or broken. Contact Delta Children for replacement parts.
- This bed is designed for children aged 15 months and up, with a maximum weight recommendation of 22.68 kg (50 lbs).
- Keep small parts away from children during assembly.
- Do not place the bed near windows where cords from blinds or drapes could strangle a child.
- Do not place items with a string, cord, or ribbon around a child's neck, such as hood strings or pacifier cords.
- Do not suspend strings over a toddler bed or attach strings to toys.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, do not proceed with assembly. Contact customer support.
- Headboard (1)
- Footboard (1)
- Side Rails (2)
- Mattress Support Slats/Frame (various pieces)
- Hardware Pack (screws, bolts, Allen wrench)
- Decorative Decals (Disney Cars theme)
Setup and Assembly
Tools required: Phillips head screwdriver (not included), Allen wrench (included).
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratching.
- Attach Side Rails to Headboard: Align the holes on the side rails with the corresponding holes on the headboard. Insert bolts and tighten securely with the Allen wrench. Do not overtighten.
- Attach Side Rails to Footboard: Repeat the previous step to attach the other ends of the side rails to the footboard. Ensure the bed frame is stable.
- Install Mattress Support: Place the mattress support slats or frame onto the designated ledges inside the side rails. Secure them according to the specific design, usually with screws.
- Apply Decals: Carefully peel and apply the Disney Cars decals to the headboard and footboard as desired. Ensure surfaces are clean and dry for best adhesion. Note: Some users have reported decals peeling; additional adhesive may be required for long-term adherence.
- Final Check: Before placing a mattress, ensure all bolts and screws are tight and the bed is stable.
Image: The Delta Children Disney Cars Plastic Toddler Bed, fully assembled, featuring Lightning McQueen and Mater decals. A child is seated on the bed, reading a book, demonstrating its use for young children.
Operating Instructions
This toddler bed is designed for sleeping and resting. It accommodates a standard crib mattress (not included).
- Mattress Placement: Place a standard crib mattress securely within the bed frame. Ensure there are no large gaps between the mattress and the bed frame that could entrap a child.
- Guardrails: The bed is equipped with integrated guardrails to help prevent falls. Ensure these are always in place and undamaged.
- Supervision: Always supervise young children, especially when they are first transitioning to a toddler bed.
Maintenance and Care
- Cleaning: Wipe surfaces with a damp cloth and mild soap. Do not use abrasive cleaners or strong chemicals, as they may damage the plastic and decals.
- Inspections: Periodically inspect the bed for loose hardware, damaged parts, or signs of wear. Tighten any loose screws or bolts immediately.
- Decal Care: If decals begin to peel, gently press them back into place. For persistent peeling, a non-toxic, child-safe adhesive may be used sparingly.
- Storage: If disassembling for storage, keep all hardware in a sealed bag and store in a dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly or unstable. | Loose hardware. | Check and tighten all screws and bolts using the provided Allen wrench. |
| Decals are peeling off. | Insufficient adhesion; surface not clean during application. | Press decals firmly back into place. For better adhesion, a small amount of child-safe, non-toxic adhesive can be applied to the back of the decal. |
| Mattress does not fit correctly. | Incorrect mattress size. | Ensure you are using a standard crib mattress. Refer to specifications for exact dimensions. |
Specifications
- Model Number: BB86707CR
- Material: Plastic
- Product Dimensions (LxWxH): 75.01 x 13.49 x 43.51 cm (29.53 x 5.31 x 17.13 inches)
- Item Weight: 7.71 kg (17 lbs)
- Maximum Weight Recommendation: 22.68 kg (50 lbs)
- Recommended Age: 15 months and up
- Compatible Mattress: Standard crib mattress (not included)
- Manufacturer: Delta Children
Warranty and Support
For warranty information, replacement parts, or customer support, please contact Delta Children directly. Refer to their official website or the product packaging for the most current contact details.
Website: www.deltachildren.com (Example link, actual link may vary)
Phone: Refer to Delta Children's official contact page for regional support numbers.
