1. Introduction
Product Overview
Armor All Original Protectant Wipes are designed to clean, shine, and protect automotive interior surfaces. These convenient, disposable wipes help guard against harmful elements like UV damage and oxidation, while enhancing the appearance of vinyl, rubber, and plastic components.
Image 1: Packaging for Armor All Original Protectant Wipes. The yellow and black pouch features the Armor All logo, product name, and claims of cleaning, shining, and guarding against UV damage. It also highlights 'Guaranteed Wipes Stay Moist' and indicates '2 Wipes 7 in x 8 in (17.7 cm x 20.3 cm)'.
Key Features
- Proven protection of Armor All Protectant in convenient, disposable wipes.
- Helps prevent cracking, fading, discoloration, and premature aging of surfaces.
- Enhances your vehicle’s deep, rich look and adds a beautiful shine.
- Renews and revitalizes vinyl, rubber, and plastic.
- Lint-free – will not leave greasy residue on hands.
2. Safety Information
Important Precautions
- KEEP OUT OF REACH OF CHILDREN AND PETS.
- CAUTION: Causes moderate eye irritation. Avoid contact with eyes or clothing.
- FIRST AID: In case of eye contact, flush with water for 15-20 minutes. If irritation persists, seek medical attention.
- DO NOT INGEST: If swallowed, call a poison control center or doctor immediately.
- Use in a well-ventilated area.
- Do not use on floors, vehicle controls (pedals, grips, steering wheels), bench or cycle seats, bicycle tires, brake drums, or other surfaces where slipperiness may be hazardous.
- Do not use on or near clear plastic or plexiglass surfaces, glass (may cause smearing), fabric, woven materials, or paint.
3. Setup
Preparing for Use
- Open the resealable pouch by lifting the flap.
- Pull out a single wipe from the opening.
- Reseal the pouch firmly after each use to keep wipes moist.
4. Operating Instructions
Application Guide
- Wipe surface clean with an Armor All Original Protectant Wipe.
- Allow the surface to dry naturally for a few minutes.
- For best results, buff lightly with a clean, dry microfiber cloth after application.
Suitable Surfaces
- Vinyl
- Rubber
- Plastic
Best Practices
- Test on an inconspicuous area before use, especially on new or unfamiliar surfaces.
- For heavily soiled surfaces, a pre-cleaning step with a general automotive cleaner may be beneficial before using the protectant wipes.
5. Maintenance
Storage
Store the wipes in a cool, dry place away from direct sunlight. Ensure the pouch is tightly sealed after each use to prevent the wipes from drying out.
6. Troubleshooting
Common Issues
- Wipes drying out: Ensure the resealable pouch is closed tightly after each use. Store in a cool, dry environment.
- Streaking: If streaking occurs, buff the surface immediately with a clean, dry microfiber cloth. Avoid using on hot surfaces or in direct sunlight.
- Uneven finish: Ensure the surface is clean and free of debris before application. Apply evenly and buff as needed.
7. Product Specifications
Technical Details
| Specification | Detail |
|---|---|
| Brand | Armor All |
| Model Number | 172MPL, 17238 |
| Item Weight | 0.704 ounces |
| Product Dimensions | 0.9 x 5 x 2 inches |
| Sheet Count | 2 wipes |
| Scent | Unscented |
| Item Form | Wipes |
8. Warranty and Support
Product Support
For questions regarding product use, safety, or performance, please contact Armor All customer service. Specific warranty details may vary by region and retailer. Please refer to your purchase documentation or the official Armor All website for the most up-to-date information.
Visit the Armor All Store for more products and information.
