Metra 95-6523 Installation Dash Kit Manual

1. Product Overview

The Metra 95-6523 Installation Dash Kit is designed to facilitate the installation of an aftermarket double DIN radio into the dashboard of 2014 and newer Ram Promaster trucks. This kit ensures a seamless and professional appearance, providing a gapless fit between the new radio and the vehicle's dashboard. It is constructed from high-grade ABS plastic, matched to the factory texture style for aesthetic integration.

Image 1.1: The Metra 95-6523 Installation Dash Kit, showing its black finish and double DIN opening.

2. Compatibility

This dash kit is compatible with the following vehicles:

• Vehicle: Ram Promaster Truck
• Model Years: 2014 and newer
• Radio Type: Double DIN aftermarket radios

3. Included Components

The Metra 95-6523 Installation Dash Kit typically includes the following components:

• Double DIN Dash Kit Trim Panel
• Mounting Brackets (left and right)
• Instruction Manual (this document)

Note: Additional vehicle-specific wiring harnesses or antenna adapters may be required and are sold separately.

4. Setup and Installation

Professional installation is recommended. Ensure the vehicle's battery is disconnected before beginning any electrical work.

4.1 Tools Required

• Panel Removal Tool
• Screwdriver Set (Phillips and Flathead)
• Socket Wrench Set
• Wire Strippers/Crimpers (if installing a new radio)

4.2 Installation Steps

1. Prepare the Vehicle: Disconnect the negative terminal of the vehicle's battery.
2. Remove Factory Radio and Trim:
   • Carefully use a panel removal tool to pry off the factory dashboard trim surrounding the radio.
   • Unscrew and remove the factory radio from its mounting location.
   • Disconnect all wiring harnesses and antenna cables from the factory radio.
3. Assemble the Dash Kit:
   • Attach the provided mounting brackets to your new aftermarket double DIN radio using the screws supplied with the radio or the kit. Ensure the radio is centered and flush with the front of the brackets.
   • Slide the assembled radio and brackets into the Metra dash kit trim panel. The radio should snap securely into place, providing a gapless fit.
4. Connect Wiring:
   • Connect the aftermarket radio's wiring harness to the vehicle's wiring harness (using an appropriate vehicle-specific adapter, if necessary).
   • Connect the antenna adapter (if necessary) and the antenna cable to the new radio.
5. Install New Radio Assembly:
   • Carefully slide the entire radio and dash kit assembly into the dashboard opening.
   • Secure the assembly using the factory screws or clips, ensuring it is firmly seated.
6. Reinstall Trim and Test:
   • Reattach any removed dashboard trim panels, ensuring all clips are engaged.
   • Reconnect the vehicle's battery.
   • Turn on the vehicle and test the new radio's functionality.

5. Maintenance

The Metra 95-6523 Dash Kit requires minimal maintenance. To clean the surface, use a soft, damp cloth. Avoid abrasive cleaners or solvents, as these may damage the finish.

6. Troubleshooting

• Issue: The dash kit does not fit correctly into the dashboard opening.
  • Solution: Double-check the vehicle's year and model against the kit's compatibility. Ensure all factory mounting points are clear of obstructions. Verify that the kit is oriented correctly.
• Issue: The aftermarket radio does not fit into the dash kit opening.
  • Solution: Confirm that your aftermarket radio is a standard double DIN size. Some radios may have slightly different dimensions or require specific trim rings not included with this kit. Minor trimming of the kit may be necessary in some cases, but proceed with caution.
• Issue: Gaps are visible between the dash kit and the dashboard.
  • Solution: Ensure all mounting screws and clips are fully engaged and tightened. The kit is designed for a gapless fit; if gaps persist, re-evaluate the installation steps and ensure no components are misaligned.

7. Specifications

8. Warranty and Support

Specific warranty information for the Metra 95-6523 Installation Dash Kit is typically provided with the product packaging or can be obtained directly from Metra Electronics Corp. Please refer to the documentation included with your purchase for details regarding warranty coverage and terms.

For technical support or further assistance, please visit the official Metra website or contact their customer service department. Contact information can usually be found on the manufacturer's website or product packaging.