Introduction
This instruction manual provides essential information for the proper handling, installation, and maintenance of the Hitachi 312742 Spring M8V M8 Replacement Part. This component is designed for use in specific Hitachi power tool products. Adhering to these instructions will help ensure the correct function and longevity of the part within your tool.
Product Overview
The Hitachi 312742 is a genuine replacement spring designed to restore the functionality of compatible Hitachi power tools. It is a critical internal component that contributes to the mechanical operation of the tool.
Component Identification

Image Description: A long, coiled metal spring, dark gray in color, shown diagonally against a white background. This image represents the Hitachi 312742 replacement spring, which is a genuine Hitachi power tool component.
Installation Instructions
Installation of this replacement spring requires careful attention to detail and adherence to safety protocols. Always refer to the specific service manual for your Hitachi power tool model for detailed disassembly and reassembly procedures.
Safety Precautions
- Always disconnect the power tool from its power source (unplug or remove battery) before beginning any repair or maintenance.
- Wear appropriate personal protective equipment, such as safety glasses and gloves.
- Ensure your work area is clean, well-lit, and free from distractions.
- If you are unsure about any step, consult a qualified technician or the official Hitachi service center.
General Installation Steps (Consult specific tool manual for details)
- Disassembly: Carefully disassemble the power tool to access the faulty or worn spring. Note the orientation and position of all components.
- Removal: Remove the old spring. Observe how it was seated and connected.
- Installation of New Spring: Position the new Hitachi 312742 spring in the exact location and orientation as the original. Ensure it is seated correctly and securely.
- Reassembly: Reassemble the power tool, ensuring all screws, covers, and components are correctly fitted and tightened.
- Function Test: After reassembly, perform a thorough function test of the tool in a safe environment before putting it into active use.
Operation
As a replacement part, the Hitachi 312742 spring does not have independent operational controls. Its function is integral to the overall operation of the power tool it is installed in. Once correctly installed, the spring will perform its intended mechanical duty, contributing to the tool's proper function, such as providing tension, facilitating movement, or absorbing impact, depending on its specific application within the tool.
Maintenance
The Hitachi 312742 spring is a durable component, but regular inspection and proper tool maintenance can extend its lifespan and ensure reliable performance.
- Inspection: During routine tool maintenance or when disassembling the tool for other repairs, visually inspect the spring for signs of wear, corrosion, deformation, or breakage.
- Cleaning: Keep the area around the spring free from dirt, debris, and excessive lubrication, which can hinder its movement or cause premature wear.
- Replacement: If the spring shows any signs of damage, loss of tension, or is not functioning as expected, replace it immediately with a genuine Hitachi 312742 replacement part to maintain tool performance and safety.
Troubleshooting
Issues related to the spring typically manifest as a malfunction in the tool's mechanical action.
- Tool Not Functioning Correctly: If the tool's mechanism feels loose, does not return to its original position, or exhibits unusual resistance, the spring may be worn, broken, or improperly installed.
- Loss of Tension: A noticeable decrease in the force or return action of a moving part within the tool can indicate a fatigued or damaged spring.
- Solution: In most cases, troubleshooting spring-related issues involves disassembling the tool, inspecting the spring, and replacing it if any damage or wear is observed. Always ensure the correct replacement part is used and installed according to the tool's service manual.
Specifications
| Attribute | Detail |
|---|---|
| Part Number | 312742 |
| Brand | Hitachi |
| Item Model Number | 312742 |
| Item Weight | 1.41 ounces |
| Product Dimensions | 1 x 1 x 1 inches |
| Item Package Quantity | 1 |
| Batteries Required? | No |
| UPC | 719592248362 |
| Manufacturer | Koki Holdings America, Ltd |
Warranty and Support
As a genuine Hitachi replacement part, the 312742 spring is manufactured to high-quality standards. For specific warranty information regarding replacement parts, please refer to the warranty policy provided with your original Hitachi power tool or contact Hitachi customer support directly.
For technical assistance, service, or to locate an authorized service center, please visit the official Hitachi Power Tools website or contact their customer service department. Using genuine Hitachi replacement parts ensures compatibility and maintains the integrity of your power tool's warranty.
Contact Information: Please refer to the official Hitachi Power Tools website or your original product documentation for the most current customer support contact details.