1. Introduction
Thank you for choosing the Silk'n Revit Microdermabrasion Machine. This device is designed to provide at-home exfoliation, helping to remove dead skin cells and stimulate your skin for a smoother, more radiant complexion. Please read this manual thoroughly before first use to ensure safe and effective operation.
2. Safety Information
Always follow basic safety precautions when using electrical appliances. This device is intended for cosmetic use on the face only. Do not use on broken, irritated, or infected skin. Consult a physician before use if you have any skin conditions, are pregnant, or have any medical concerns. Keep out of reach of children.
- Ensure skin is clean and dry before treatment.
- Start with the lowest intensity setting.
- Do not hold the device in one spot for too long to avoid bruising.
- Avoid sensitive areas, especially around the eyes.
- Use sun protection after treatment, especially when exposed to sunlight.
- Do not use if the device or power cord is damaged.
3. Product Overview
The Silk'n Revit device utilizes diamond microdermabrasion technology combined with gentle vacuum stimulation to exfoliate the skin.
3.1 Components
Image: The Silk'n Revit Microdermabrasion Device showing the main unit, precision attachment, coarse attachment, and fine attachment.
The device consists of the main handheld unit and interchangeable diamond attachments. It operates via a power cord.
3.2 Diamond Attachments
Image: Detailed view of the three diamond attachments: Coarse, Precision, and Fine, with descriptions of their intended use.
- Fine Attachment: Recommended for initial treatments and general, gentle exfoliation.
- Precision Attachment: Ideal for smaller, more delicate areas such as around the nose and eyes.
- Coarse Attachment: Designed for more intensive exfoliation on areas requiring deeper treatment.
4. Setup
- Ensure your skin is clean and completely dry before beginning.
- Select the desired diamond attachment (start with the Fine attachment for your first use).
- Attach the chosen diamond tip firmly onto the device.
- Insert a clean filter into the device.
- Plug the device into a power outlet.
5. Operating Instructions
Follow these steps for effective and safe use of your Silk'n Revit device:
- Power On: Press the power button on the device. It will start on the low suction level. Press again for a higher suction level.
- Skin Preparation: Gently pull your skin taut with your free hand.
- Treatment Application: Hold the device like a pencil and glide it across your skin in an upward motion. Perform 2-3 passes over each area.
- Target Areas:
- Cheeks and Forehead: Use long, upward strokes.
- Nose and Chin: Use the Precision attachment for detailed work, moving carefully.
- Around the Eyes: Use the Precision attachment with extreme caution, avoiding direct contact with the eyelids or very sensitive skin.
- Observe Skin: Monitor your skin for any excessive redness or discomfort. Reduce intensity or stop if necessary.
- Power Off: Once treatment is complete, press the power button to turn off the device.
5.1 Vacuum Stimulation
Image: The Silk'n Revit device in use, demonstrating the vacuum stimulation feature for improved blood circulation and skin texture.
The gentle vacuum action not only removes exfoliated skin cells but also stimulates blood circulation, contributing to a healthier, more vibrant skin appearance.
5.2 Instructional Video
Video: A detailed demonstration of how to use the Silk'n Revit Microdermabrasion Device, including attachment selection and proper technique. (Duration: 3:49)
Video: A concise overview of the Silk'n Revit device, highlighting its benefits for blackhead removal, age spot reduction, and overall skin improvement. (Duration: 0:29)
6. Maintenance
- Filter Replacement: After each use, remove the used filter from the device and discard it. Replace with a new, clean filter for the next treatment.
- Attachment Cleaning: Clean the diamond attachments with a soft brush and mild soap, then rinse thoroughly with water. Allow them to air dry completely before storing.
- Device Cleaning: Wipe the main device unit with a soft, damp cloth. Do not immerse the device in water.
- Storage: Store the device and its attachments in a clean, dry place, away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Not plugged in correctly; power outlet issue. | Ensure the device is securely plugged into a working power outlet. |
| Weak suction. | Filter is clogged or incorrectly inserted; attachment not properly secured. | Replace the filter with a new one. Ensure the attachment is firmly in place. |
| Excessive redness or discomfort. | Too much pressure; device held in one spot too long; high suction setting. | Reduce pressure, keep the device moving, or switch to a lower suction setting. Ensure skin is not overly sensitive. |
8. Specifications
- Model Number: 7290015418133
- Product Dimensions: 6.1 x 1.27 x 1.27 inches
- Item Weight: 4 ounces
- Brand: Silk'n
- Technology: Diamond Microdermabrasion with Vacuum Stimulation
- Attachments: Fine, Precision, Coarse
9. Warranty and Support
For warranty information, product registration, or technical support, please refer to the official Silk'n website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Official Website: www.silkn.com
