Behringer XD8USB Electronic Drum Set Instruction Manual

1. Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Behringer XD8USB Electronic Drum Set. Please read these instructions thoroughly before using the product to ensure safe and optimal performance. Retain this manual for future reference.

2. Safety Instructions

• Power Supply: Use only the specified power adapter. Ensure the voltage matches your local power supply.
• Water and Moisture: Do not expose the unit to rain, moisture, or excessive humidity. Avoid placing liquid-filled objects on the unit.
• Ventilation: Ensure adequate ventilation. Do not block ventilation openings.
• Heat Sources: Keep the unit away from heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
• Cleaning: Clean only with a dry cloth. Do not use liquid cleaners or aerosols.
• Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
• Cables: Protect power cords from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

3. Package Contents

Upon unpacking your Behringer XD8USB Electronic Drum Set, please verify that all components listed below are present and in good condition:

• HDS110USB Sound Module
• Drum Rack Hardware
• 4x 8-inch Drum Pads (Snare, Tom 1, Tom 2, Tom 3)
• 1x Percussion Pad with Stand and Pedal (Kick Drum)
• 3x 12-inch Cymbal Pads (Hi-Hat, Crash, Ride)
• 1x Hi-Hat Control Pedal
• Drumsticks
• Multipin Cabling and Connectors
• Power Adapter

4. Setup and Assembly

Careful assembly is crucial for stability and optimal playability. Follow these general steps:

1. Assemble the Drum Rack: Begin by assembling the main frame of the drum rack. Ensure all connections are secure and tightened to provide a stable foundation.
2. Attach Drum Pads: Mount the 8-inch drum pads (snare, tom 1, tom 2, tom 3) to the rack. Position them ergonomically for comfortable playing.
3. Attach Cymbal Pads: Mount the 12-inch cymbal pads (hi-hat, crash, ride) to their respective arms on the rack.
4. Position Kick Drum and Pedals: Place the percussion pad (kick drum) and its pedal in front of the rack. Position the hi-hat control pedal next to it.
5. Adjusting Components: Once all components are loosely attached, adjust their angles and heights to your preference. Then, securely tighten all clamps and bolts.

Image 1: Fully assembled Behringer XD8USB Electronic Drum Set. This image displays the complete 8-piece electronic drum set, including the drum pads, cymbal pads, kick drum pad, hi-hat pedal, and the HDS110USB sound module mounted on the rack.

5. Connecting the Components

The XD8USB uses multipin cabling for simplified connection. Each cable is typically labeled to correspond with its respective pad or pedal.

1. Connect Pads to Module: Connect the multipin cable from each drum and cymbal pad to the corresponding input on the HDS110USB sound module. Ensure connections are firm.
2. Connect Pedals: Connect the kick drum pedal and hi-hat control pedal to their designated inputs on the sound module.
3. Power Connection: Connect the power adapter to the HDS110USB module and then to a suitable power outlet.
4. Audio Output: Connect headphones to the headphone jack or connect the module's main output to an amplifier or mixer using appropriate audio cables (not included).
5. USB Connection: For computer connectivity, use a standard USB cable to connect the module to your computer.

6. Operating the HDS110USB Sound Module

The HDS110USB module is the central control unit for your drum set. It features various drum kits, sounds, and practice functions.

Image 2: Close-up view of the Behringer HDS110USB Sound Module. This image highlights the module's display, control buttons for kit selection, voice, pattern, volume, and individual pad triggers.

• Power On/Off: Use the power button to turn the module on or off.
• Volume Control: Adjust the master volume using the dedicated knob.
• Kit Selection: Use the 'KIT' buttons to cycle through the available preset drum kits.
• Voice Selection: The 'VOICE' function allows you to change individual instrument sounds within a selected kit.
• Pattern/Song Playback: The module includes built-in patterns or songs for practice. Use the 'PAT' buttons to select and control playback.
• Metronome: Activate the metronome for timing practice.
• USB Connectivity: When connected to a computer via USB, the module can function as a MIDI interface, allowing you to trigger sounds in software or record MIDI data.

7. Basic Operation

After setup, ensure your headphones or external audio system are connected and powered on. Turn on the HDS110USB module. Select a drum kit and begin playing. Experiment with different kits and sounds to find your preferred settings.

8. Maintenance

Regular maintenance helps prolong the life of your electronic drum set.

• Cleaning: Wipe down pads, cymbals, and the module with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Cable Management: Keep cables organized and untangled to prevent damage.
• Storage: When not in use for extended periods, store the drum set in a clean, dry environment, away from extreme temperatures.
• Pad Care: While pads are durable, avoid excessive force that could damage the sensors.

9. Troubleshooting

If you encounter issues, refer to the following common problems and solutions:

• No Sound:
  • Check power connection to the module.
  • Ensure headphones or external speakers are connected and their volume is up.
  • Verify the module's master volume is not at minimum.
• Pad Not Triggering:
  • Check the cable connection for the specific pad to the module.
  • Ensure the pad is securely mounted and not loose.
• Unwanted Triggers (Crosstalk):
  • This can occur if pads are too sensitive or mounted too close. Adjust pad sensitivity settings in the module (if available) or reposition pads slightly.
  • Avoid hitting the drum rack frame, as vibrations can sometimes trigger nearby pads.
• Buzzing Sound:
  • Ensure all audio cables are properly shielded and connected.
  • If connecting an external device (e.g., phone, MP3 player), try disconnecting it to see if the buzzing stops.
• Hi-Hat Pedal Response Issues:
  • Verify the hi-hat control pedal cable is securely connected.
  • Ensure the pedal mechanism is not obstructed and moves freely.

10. Specifications

11. Warranty and Support

For detailed warranty information, please refer to the documentation included with your purchase or visit the official Behringer website. If you require technical support or have questions not covered in this manual, please contact Behringer customer service or your authorized dealer.