Lorell Leather Deluxe Big/Tall Chair LLR40206 User Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Lorell Leather Deluxe Big/Tall Chair, Model LLR40206. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

Figure 1: Lorell Leather Deluxe Big/Tall Chair (Black)

2. Safety Information

• Ensure all components are securely fastened before use.
• Do not stand on the chair.
• Do not use the chair if any parts are damaged or missing. Contact customer support for replacement parts.
• Keep hands and feet clear of moving parts during adjustments.
• This chair is designed to support a maximum weight of 450 pounds. Exceeding this limit may cause damage or injury.

3. Package Contents

Verify that all components are present before beginning assembly:

• Chair Back
• Seat Cushion
• Armrests (2)
• Five-Star Base
• Casters (5)
• Gas Lift Cylinder
• Mechanism Plate
• Hardware Pack (bolts, washers, Allen wrench)

4. Setup and Assembly

Follow these steps to assemble your Lorell Leather Deluxe Big/Tall Chair:

1. Attach Casters to Base: Insert each of the five casters into the holes at the end of each leg of the five-star base. Push firmly until they click into place.
2. Insert Gas Lift: Place the gas lift cylinder into the center hole of the five-star base.
3. Attach Mechanism Plate to Seat: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the front of the mechanism plate faces the front of the seat. Secure with the provided bolts and tighten with the Allen wrench.
4. Attach Armrests to Seat and Back: Attach the armrests to the sides of the seat cushion and the chair back using the designated bolts. Do not fully tighten until all bolts are in place.
5. Connect Seat to Gas Lift: Carefully place the assembled seat and back onto the gas lift cylinder, ensuring the center hole of the mechanism plate aligns with the top of the gas lift. Press down firmly to secure.
6. Final Tightening: Once all components are assembled, go back and securely tighten all bolts.

Figure 2: Chair Dimensions Diagram

5. Operating Instructions

Your Lorell Leather Deluxe Big/Tall Chair offers several adjustment features for personalized comfort:

• Pneumatic Seat-Height Adjustment: Locate the lever on the right side, beneath the seat. Pull the lever up to raise the seat. To lower, remain seated and pull the lever up. Release the lever at the desired height.
• 360-Degree Swivel: The chair is designed to rotate freely in a full circle, allowing for easy movement and access to your workspace.
• Tilt with Lock: The lever on the left side, beneath the seat, controls the tilt function. Push the lever in to lock the chair in an upright position. Pull the lever out to allow the chair to recline.
• Tilt Tension Adjustment: The round knob located at the front, beneath the seat, adjusts the resistance of the tilt mechanism. Turn clockwise to increase tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).

6. Maintenance

Proper care will extend the life of your chair:

• Cleaning: Spot clean the bonded leather upholstery with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners.
• Hardware: Periodically check all bolts and screws to ensure they are tight. Re-tighten as necessary to prevent wobbling or instability.
• Casters: Clean casters regularly to remove hair, dust, and debris that may impede smooth movement.

7. Troubleshooting

• Chair wobbles: Ensure all assembly bolts are securely tightened. Check that the casters are fully inserted into the base.
• Chair does not adjust height: Verify that the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement.
• Chair does not tilt or tilts too easily/stiffly: Adjust the tilt tension knob. Ensure the tilt lock lever is in the correct position (pulled out for tilt, pushed in for lock).
• Casters do not roll smoothly: Clean any debris from the caster wheels. Ensure the chair is on an appropriate surface (hard floor recommended).

8. Specifications

9. Warranty Information

For specific warranty details regarding your Lorell Leather Deluxe Big/Tall Chair, please refer to the warranty card included with your purchase or visit the official Lorell website. Warranty coverage typically includes manufacturing defects for a specified period from the date of purchase.

10. Customer Support

If you have any questions, require assistance with assembly, or need to order replacement parts, please contact Lorell customer support through their official website or the contact information provided with your product packaging.

You can also visit the Lorell Store on Amazon for more information.