Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your RAB Lighting LED Bullet Flood 2x12W Adjustable Dual Heads fixture. Please read this manual thoroughly before installation and retain it for future reference.
Important Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.
- Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
- Do not install near combustible materials.
- Ensure the fixture is properly grounded.
- Do not attempt to modify the fixture.
- Suitable for wet locations, wall mount only.
Package Contents
Verify that all components are present before beginning installation:
- RAB Lighting LED Bullet Flood 2x12W Fixture (1)
- Mounting Hardware (screws, wire nuts) (1 set)
- Instruction Manual (1)
Image: RAB Lighting LED Bullet Flood 2x12W Adjustable Dual Heads fixture in white finish. This image shows the two adjustable LED floodlight heads attached to a central mounting base.
Specifications
| Feature | Detail |
|---|---|
| Model Number | SMSBULLET2X12NA |
| Power Source | Corded Electric, 120 Volts |
| Wattage | 24 Watts (2x12W LED) |
| Light Output | 1664 Lumens |
| Color Temperature | 5000 Kelvin (Cool White) |
| Light Source Type | LED |
| Material | Metal (Fixture), Plastic (Shade) |
| Finish Type | White |
| Installation Type | Wall-Mounted |
| Indoor/Outdoor Usage | Outdoor (Suitable for wet locations) |
| Dimensions | 14.3 x 8.2 x 7.8 inches |
| Weight | 4.99 pounds |
Setup and Installation
Tools Required: Screwdriver, Wire Strippers, Pliers, Electrical Tape, Voltage Tester, Ladder (if necessary).
- Turn Off Power: Locate the circuit breaker or fuse box controlling the power to the installation area. Turn off the power completely before proceeding. Verify power is off using a voltage tester.
- Prepare Mounting Surface: Ensure the mounting surface is clean, dry, and structurally sound. This fixture is designed for wall mounting only.
- Mount the Fixture: Secure the fixture's mounting base to the wall using the provided mounting hardware. Ensure a tight and stable connection.
- Wire Connections: Connect the fixture's wires to the corresponding household electrical wires.
- Connect the black fixture wire to the black (hot) supply wire.
- Connect the white fixture wire to the white (neutral) supply wire.
- Connect the green or bare copper fixture wire to the green or bare copper (ground) supply wire.
Secure all connections with wire nuts and electrical tape.
- Seal Connections: Ensure all wire connections are properly insulated and tucked into the junction box.
- Final Assembly: Attach the fixture body to the mounting base, ensuring it is securely fastened.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker or fuse box.
Operating Instructions
The RAB Lighting LED Bullet Floodlight is designed for straightforward operation.
- Power On/Off: The fixture is controlled by the wall switch or external control device connected to its power supply.
- Adjusting Light Heads: The two LED floodlight heads are independently adjustable. Loosen the adjustment screws on each head, position the light beam as desired, and then securely tighten the screws to maintain the position.
- Light Output: The fixture provides 1664 lumens of 5000K cool white light.
Maintenance
Regular maintenance ensures optimal performance and longevity of your floodlight.
- Cleaning: Periodically clean the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
- Inspection: Annually inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- LEDs: The integrated LED light sources are designed for long life (100,000 hours) and are not user-replaceable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wiring connection. Faulty switch. | Check circuit breaker/fuse. Verify all wire connections are secure (ensure power is off first). Test or replace the switch. |
| Light flickers. | Loose wiring connection. Incompatible dimmer switch (if applicable). | Check and secure all wiring connections. This fixture is not specified as dimmable; ensure it's connected to a standard ON/OFF switch. |
| Reduced light output. | Dirt or debris on lens. | Clean the diffusion lens with a soft, damp cloth. |
If issues persist after troubleshooting, contact RAB Lighting customer support.
Warranty Information
This RAB Lighting product comes with a Limited Warranty. For specific terms, conditions, and duration of the warranty, please refer to the official RAB Lighting website or contact their customer service. Retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, replacement parts, or warranty inquiries, please contact RAB Lighting directly:
- Website: www.rablighting.com
- Phone: Refer to the RAB Lighting website for current contact numbers.
