Introduction
This user manual provides essential information for the safe and effective operation, setup, maintenance, and troubleshooting of your ResMed AirSense™ 10 AutoSet™ for Her with HumidAir™ device. This device is designed to provide continuous positive airway pressure (CPAP) therapy for the treatment of obstructive sleep apnea (OSA). Please read this manual thoroughly before using the device.
Setup
Follow these steps to set up your AirSense™ 10 device for the first time.
- Unpack the Device: Carefully remove the AirSense™ 10 device, power supply, air tubing, and HumidAir™ water tub from the packaging.
- Connect Power: Plug the AC adapter into the power inlet at the rear of the device, then plug the other end into a power outlet. The device will automatically power on.
- Fill the HumidAir™ Water Tub: Open the water tub and fill it with distilled water up to the maximum fill line. Do not overfill. Close the water tub securely.
- Insert Water Tub: Slide the filled water tub into the side of the AirSense™ 10 device until it clicks into place.
- Connect Air Tubing: Firmly connect one end of the air tubing to the air outlet at the rear of the device. Connect the other end to your mask.
- Attach Mask: Connect your prescribed CPAP mask to the free end of the air tubing. Ensure a comfortable and secure fit.

This image shows the ResMed AirSense 10 AutoSet for Her device, a continuous positive airway pressure (CPAP) machine. It features a central color display screen, a large rotary dial for navigation, and an integrated HumidAir humidifier on the right side. The device is white with subtle floral patterns.
Operating Instructions
Once set up, operating your AirSense™ 10 device is straightforward.
- Starting Therapy: Ensure your mask is on and properly sealed. Press the Start/Stop button (usually a large button on the top of the device) to begin therapy. The screen will display the current pressure and other therapy information.
- Stopping Therapy: To stop therapy, simply press the Start/Stop button again.
- Navigating the Menu: Use the rotary dial to scroll through menu options on the display screen. Press the dial to select an option. The Home button (often a house icon) will return you to the main screen.
- Adjusting Settings: From the My Options menu, you can adjust settings such as Ramp Time, Humidity Level, and Mask Fit. Consult your healthcare provider before making significant changes to prescribed settings.
- Ramp Time: This feature gradually increases the pressure from a lower starting pressure to your prescribed therapy pressure, making it easier to fall asleep.
- Humidity Level: Adjust the humidity level to your comfort. Higher settings provide more humidification.
Maintenance
Regular cleaning and maintenance are crucial for the longevity and effective operation of your device.
Daily Cleaning
- Water Tub: Empty any remaining water from the HumidAir™ water tub. Wash the tub with warm water and mild dish soap. Rinse thoroughly and allow to air dry out of direct sunlight.
- Mask: Disassemble your mask (cushion, frame, headgear). Wash the cushion and frame with warm water and mild soap. Rinse well and allow to air dry.
Weekly Cleaning
- Air Tubing: Wash the air tubing in warm water with mild soap. Rinse thoroughly and hang to air dry. Ensure it is completely dry before reattaching.
- Device Exterior: Wipe the exterior of the device with a clean, damp cloth. Do not immerse the device in water or use harsh cleaning agents.
Filter Replacement
The air filter should be checked regularly (e.g., monthly) and replaced as needed, or every six months.
- Locate the air filter cover at the rear of the device.
- Remove the old filter.
- Insert a new, clean filter, ensuring it sits flat.
- Replace the filter cover.
Troubleshooting
If you encounter issues with your AirSense™ 10 device, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No air flow or very low air flow | Air tubing blocked or disconnected; filter blocked; device not powered on. | Check tubing for kinks or disconnections. Ensure air filter is clean. Verify power connection and press Start/Stop. |
| Mask leak | Mask not fitted correctly; wrong mask size; mask components worn out. | Adjust mask headgear for a snug fit. Try a different mask size or style. Replace worn mask parts. |
| Dry nose or throat | Humidity level too low; humidifier water tub empty. | Increase humidity level in My Options. Refill water tub with distilled water. |
| Device making unusual noise | Air filter dirty; device placed on soft surface; internal issue. | Check and replace air filter. Place device on a firm, flat surface. If noise persists, contact your equipment provider. |
If the problem persists after attempting these solutions, please contact your equipment provider or ResMed customer support for further assistance. Do not attempt to open or repair the device yourself.
Specifications
Key technical specifications for the ResMed AirSense™ 10 AutoSet™ for Her with HumidAir™ device.
- Manufacturer: ResMed
- Model: AirSense™ 10 AutoSet™ for Her with HumidAir™
- ASIN: B00O5DXX48
- Manufacturer Reference: 37209
- Parcel Dimensions: 36.83 x 31.75 x 14.22 cm; 2.9 kg
- Place of Business: Obfelden, 8912, CH
- First Available: December 10, 2019
Warranty and Support
For detailed warranty information, please refer to the documentation included with your product packaging or visit the official ResMed website. Warranty terms and conditions may vary by region.
If you require technical support, service, or have questions regarding your device, please contact your authorized ResMed equipment provider. You can also visit the official ResMed store for more information: ResMed Store on Amazon.ca.