1. Overview
This document provides essential information for the proper installation, safe operation, and routine maintenance of your Scag 461846 61V Discharge Chute. This original equipment manufacturer (OEM) part is designed to replace the existing discharge chute on compatible Scag 61V lawn mowers, ensuring proper grass clipping dispersal and operational safety.
2. Safety Information
Always prioritize safety when working with lawn care equipment. Read and understand all safety warnings and instructions provided with your mower and this discharge chute. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, during installation and maintenance.
- Ensure the mower engine is off and the spark plug wire is disconnected before performing any work.
- Keep hands and feet away from moving parts.
- Do not operate the mower without the discharge chute or grass catcher properly attached.
- Inspect the discharge chute regularly for damage or wear. Replace if necessary.
3. Setup and Installation
This section outlines the general steps for installing the Scag 461846 61V Discharge Chute. Specific mower models may have slight variations. Refer to your mower's owner's manual for detailed instructions.
3.1 Required Tools
- Wrenches (sizes may vary depending on existing hardware)
- Safety glasses
- Gloves
3.2 Installation Steps
- Prepare the Mower: Park the mower on a flat, stable surface. Turn off the engine, engage the parking brake, and disconnect the spark plug wire to prevent accidental starting.
- Remove Existing Chute (if applicable): Carefully remove any existing discharge chute or deflector. This typically involves unbolting it from the mower deck. Retain any hardware that may be reused.
- Position the New Chute: Align the Scag 461846 discharge chute with the mounting points on your mower deck.
- Secure the Chute: Use appropriate bolts, washers, and nuts to securely fasten the new discharge chute to the mower deck. Ensure all connections are tight but do not overtighten to avoid damaging components.
- Verify Operation: Once installed, gently test the movement of the chute (if it's a movable type) to ensure it operates smoothly without obstruction. Reconnect the spark plug wire.
Image 1: Top view of the Scag 461846 Discharge Chute. This image displays the overall shape and design of the chute, highlighting its robust construction and the integrated tag.
Image 2: Bottom view of the Scag 461846 Discharge Chute, showing the underside and a prominent warning label. This view helps identify mounting points and safety markings.
3.3 General Installation Guide (Video)
Video 1: General guide on how to install a mower discharge shield. While not specific to the Scag 461846, this video demonstrates common steps and considerations for installing a similar component on a lawn mower deck. Always refer to your specific mower's manual for precise instructions.
4. Operating Instructions
The Scag 461846 Discharge Chute is a passive component designed to direct grass clippings away from the mower deck. Its operation is integrated with the mower's overall function.
- Ensure the discharge chute is always in place before starting the mower.
- If your mower features an adjustable or movable discharge chute, ensure it is positioned correctly for the desired clipping dispersal pattern before operating.
- Never attempt to clear the discharge area while the engine is running or the blades are engaged.
5. Maintenance
Regular maintenance of your discharge chute ensures its longevity and proper function.
- Cleaning: After each use, clean any accumulated grass clippings or debris from the chute and surrounding deck area. This prevents blockages and maintains efficient discharge.
- Inspection: Periodically inspect the chute for cracks, damage, or excessive wear. Check all mounting hardware for tightness.
- Replacement: If the chute becomes damaged or worn to the point where it no longer effectively directs clippings or poses a safety risk, replace it immediately with a genuine Scag 461846 part.
6. Troubleshooting
This section addresses common issues related to the discharge chute.
| Problem | Possible Cause | Solution |
|---|---|---|
| Grass clippings not discharging properly. | Clogged chute, damaged chute, dull blades. | Clear debris from chute. Inspect chute for damage and replace if necessary. Sharpen or replace mower blades. |
| Discharge chute is loose or rattling. | Loose mounting hardware. | Tighten all bolts and nuts securing the chute to the mower deck. |
| Visible damage or cracks on the chute. | Impact or material fatigue. | Replace the discharge chute immediately to ensure safety and proper function. |
7. Specifications
- Model Number: 461846
- Brand: Scag
- Compatibility: Designed for Scag 61V mowers (verify with your specific mower model)
- Product Dimensions: 24 x 6 x 6 inches
- Item Weight: 5.1 pounds
- Part Type: OEM Discharge Chute with Tag
8. Warranty and Support
As an Original Equipment Manufacturer (OEM) part, the Scag 461846 Discharge Chute is typically covered by Scag's standard warranty for replacement parts. For specific warranty details, including coverage period and terms, please refer to the warranty information provided with your original mower purchase or contact an authorized Scag dealer.
For technical assistance, troubleshooting beyond this manual, or to purchase additional genuine Scag parts, please contact your authorized Scag dealer or visit the official Scag website for support resources.
