ADTRAN 1703599G1

Download PDF
Contents

ADTRAN NetVanta 1238P Managed 48-Port Ethernet Switch User Manual

Model: 1703599G1

1. Introduction

This manual provides comprehensive instructions for the installation, configuration, and operation of the ADTRAN NetVanta 1238P Managed 48-Port Ethernet Switch. The NetVanta 1238P is a Layer 2 managed switch designed for efficient, secure, and cost-effective Ethernet switching in business environments. It features 48 Power over Ethernet (PoE) ports, making it suitable for powering devices such as IP phones, wireless access points, and surveillance cameras, while offering robust Quality of Service (QoS) and advanced security capabilities.

2. Safety Information

Please read all safety instructions before installing or operating this device. Failure to comply with these instructions may result in electric shock, fire, or damage to the equipment.

  • Ensure the power source voltage is compatible with the switch's requirements.
  • Do not expose the device to water or excessive humidity.
  • Install the switch in a well-ventilated area to prevent overheating.
  • Only use the power adapter supplied with the device or an approved replacement.
  • Do not open the device casing; refer all servicing to qualified personnel.

3. Package Contents

Verify that your package contains the following items:

  • ADTRAN NetVanta 1238P Managed 48-Port Ethernet Switch
  • Power Cord
  • Rack-mount Kit (brackets and screws)
  • Documentation (Quick Start Guide, Safety Information)

4. Physical Overview

The ADTRAN NetVanta 1238P switch features a robust metal casing designed for rack-mounting. The front panel provides access to all 48 Ethernet ports and status indicators.

Adtran Netvanta 1238P 48-Port Managed Ethernet Switch front view

Figure 4.1: Front view of the ADTRAN NetVanta 1238P switch. This image displays the front panel of the Adtran Netvanta 1238P switch, featuring 48 Ethernet ports arranged in two rows, along with status indicator lights. The device has a black and blue casing.

4.1 Front Panel

  • Ethernet Ports (1-48): RJ-45 ports for network connections, supporting Power over Ethernet (PoE).
  • Status LEDs: Indicators for power, system status, and individual port activity/PoE status.

4.2 Rear Panel

  • Power Input: Connector for the AC power cord.
  • Console Port: (If present, typically RJ-45 or USB) For local management via a serial connection.

5. Setup

5.1 Rack Mounting

  1. Attach the provided rack-mount brackets to the sides of the switch using the included screws.
  2. Secure the switch into a standard 19-inch equipment rack using appropriate rack screws. Ensure adequate airflow around the device.

5.2 Power Connection

  1. Connect the power cord to the power input on the rear panel of the switch.
  2. Plug the other end of the power cord into a grounded electrical outlet.
  3. The switch will power on automatically. Observe the power LED for status.

5.3 Network Connection

  1. Connect Ethernet cables from your network devices (computers, servers, IP phones, WAPs) to the RJ-45 ports on the front panel.
  2. For PoE-enabled devices, ensure they are 802.3af compliant to receive power from the switch.

5.4 Initial Configuration (Web GUI)

The NetVanta 1238P can be managed via a web-based graphical user interface (GUI).

  1. Connect a computer directly to any Ethernet port on the switch.
  2. Configure your computer's IP address to be in the same subnet as the switch's default IP address (refer to the Quick Start Guide or ADTRAN documentation for default IP).
  3. Open a web browser and enter the switch's default IP address.
  4. Log in using the default username and password (consult ADTRAN documentation).
  5. It is highly recommended to change the default login credentials immediately after initial access.

6. Operating the Switch

6.1 Basic Operation

  • Power On: Connect the power cord. The switch will initiate its boot sequence.
  • Power Off: Disconnect the power cord from the electrical outlet. For controlled shutdown, consult the web GUI or CLI documentation.
  • LED Indicators: Monitor the front panel LEDs for operational status. Green indicates normal operation, amber may indicate issues or specific modes.

6.2 Key Features

  • Power over Ethernet (PoE): The switch provides 802.3af compliant PoE on all 48 ports, simplifying deployment of powered devices.
  • Quality of Service (QoS): Configure QoS settings via the web GUI to prioritize critical network traffic, such as VoIP, ensuring optimal performance.
  • VLANs: Create Virtual Local Area Networks to segment network traffic, enhancing security and performance.
  • Security Features: Utilize built-in security protocols to protect your network from unauthorized access and threats.

6.3 Web GUI Navigation

The web GUI provides an intuitive interface for managing the switch. Common sections include:

  • Dashboard: Overview of switch status, port activity, and system health.
  • Port Configuration: Settings for individual ports, including speed, duplex, and PoE.
  • VLAN Management: Create, modify, and assign VLANs to ports.
  • QoS Settings: Configure traffic prioritization rules.
  • Security: Access control lists, authentication settings, and other security features.
  • System: Firmware updates, backup/restore configuration, user management.

For detailed configuration steps, refer to the comprehensive ADTRAN NetVanta 1238P Software Configuration Guide available on the ADTRAN support website.

7. Maintenance

7.1 Firmware Updates

Regularly check the ADTRAN support website for the latest firmware updates. Firmware updates can provide new features, performance improvements, and security patches. Follow the instructions provided with the firmware package for a safe update process.

7.2 Cleaning

To clean the exterior of the switch, use a soft, dry cloth. Do not use liquid or aerosol cleaners, as they may damage the device. Ensure the device is powered off and disconnected from the power source before cleaning.

7.3 Environmental Considerations

Maintain the operating environment within the specified temperature and humidity ranges to ensure optimal performance and longevity of the switch. Avoid placing the switch near heat sources or in direct sunlight.

8. Troubleshooting

This section addresses common issues you might encounter with the NetVanta 1238P switch.

ProblemPossible CauseSolution
No PowerPower cord disconnected; Power outlet failure; Internal power supply issue.Check power cord connection; Test power outlet; Contact ADTRAN support if issue persists.
No Network ConnectivityIncorrect cable connection; Port disabled; IP address conflict; VLAN misconfiguration.Verify Ethernet cable connections; Check port status in web GUI; Ensure correct IP settings; Review VLAN configurations.
PoE Device Not Powering OnDevice not 802.3af compliant; PoE disabled on port; Power budget exceeded.Confirm device PoE standard; Enable PoE on the specific port via web GUI; Check total PoE power budget.
Cannot Access Web GUIIncorrect IP address; Network connectivity issue; Browser cache.Verify switch IP address and computer's IP settings; Clear browser cache; Try a different browser.

If you encounter issues not covered here, or if solutions do not resolve the problem, please refer to the ADTRAN support website or contact technical support.

9. Specifications

FeatureDetail
Model Number1703599G1
BrandADTRAN
TypeManaged Layer 2 Ethernet Switch
Number of Ports48 x 10/100/1000Base-T (Gigabit Ethernet)
PoE SupportYes, 802.3af compliant on all 48 ports
Switching Capacity23.6 Gbps (Non-blocking)
ManagementWeb GUI, CLI, SNMP
QoSClass of Service (CoS) for VoIP prioritization
Form FactorRack-Mountable
Case MaterialMetal
ColorBlack/Blue
Dimensions (LxWxH)22 x 22 x 7 inches
Item Weight13.42 pounds
UPC607565038716

10. Warranty and Support

For detailed warranty information and technical support, please visit the official ADTRAN website or contact your authorized ADTRAN reseller. Keep your purchase receipt and product serial number handy when seeking support.

ADTRAN Website: www.adtran.com/support

© 2023 ADTRAN. All rights reserved. Information in this document is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.