MIFA F1 Portable Bluetooth Speaker User Manual

Introduction

Thank you for purchasing the MIFA F1 Portable Bluetooth Speaker. This manual provides detailed instructions on how to set up, operate, and maintain your speaker. Please read this manual carefully before use to ensure optimal performance and longevity of your device. Keep this manual for future reference.

Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, contact your retailer.

• 1 x MIFA F1 Portable Bluetooth Speaker
• 1 x Portable Hook
• 1 x Mini USB Charging Cable
• 1 x User Manual
• 1 x Warranty Card

Product Overview

Familiarize yourself with the speaker's components and controls.

Image 1: Speaker Controls and Ports. This image displays the top view of the MIFA F1 speaker, highlighting the control buttons and indicator light. From left to right, the buttons are: On/Off/Mode, M/O (Mode/On), Play/Bluetooth, Previous Track/Volume Down, Next Track/Volume Up. The microphone is located near the volume buttons, and an indicator light is visible on the right side.

• 1. On/Off/Mode Button: Press and hold to power on/off. Short press to switch modes (Bluetooth, Micro SD).
• 2. Play/Bluetooth Button: Short press to play/pause music. In Bluetooth mode, press and hold to enter pairing mode.
• 3. Previous Track / Volume Down Button: Short press for previous track. Press and hold to decrease volume.
• 4. Next Track / Volume Up Button: Short press for next track. Press and hold to increase volume.
• 5. Microphone: For hands-free calling.
• 6. Indicator Light: Shows power status, charging status, and Bluetooth connection status.
• 7. Calling Button: For answering/ending calls.

Image 2: Speaker Side Ports. This image shows the side view of the MIFA F1 speaker, illustrating the Micro SD card slot and the Micro USB 2.0 charging port, both protected by a cover.

• 8. TF Card Slot (Micro SD): Insert a Micro SD card for local music playback.
• 9. Micro USB 2.0 Port: For charging the speaker.

Setup

1. Charging the Speaker

1. Connect the supplied Mini USB charging cable to the Micro USB 2.0 port on the speaker.
2. Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
3. The indicator light will illuminate during charging. It takes approximately 1 hour for a full charge.
4. Once fully charged, the indicator light will change or turn off (refer to specific light behavior in the Troubleshooting section if unsure).
5. A full charge provides approximately 10 hours of music playback.

2. Powering On/Off

• To Power On: Press and hold the On/Off/Mode button until the indicator light illuminates and you hear a power-on prompt.
• To Power Off: Press and hold the On/Off/Mode button until the indicator light turns off and you hear a power-off prompt.

Operating Instructions

1. Bluetooth Pairing

1. Ensure the speaker is powered on and in Bluetooth mode. If not, short press the On/Off/Mode button to switch to Bluetooth mode. The indicator light will flash, indicating it's ready for pairing.
2. On your mobile device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
3. Select "MIFA F1" from the list of found devices.
4. Once paired, the indicator light will stop flashing and remain solid, and you will hear a confirmation sound.
5. The effective Bluetooth range is approximately 10 meters (33 feet).

2. Playing Music

a. Via Bluetooth

• After successful Bluetooth pairing, start playing music on your connected device.
• Short press the Play/Bluetooth button to play or pause music.
• Short press the Previous Track or Next Track buttons to skip tracks.
• Press and hold the Volume Down or Volume Up buttons to adjust the volume.

b. Via Micro SD Card

• Insert a Micro SD card (TF card) with supported audio files (APE, FLAC, WAV, WMA, MP3) into the TF card slot.
• The speaker will automatically switch to Micro SD card mode or you can short press the On/Off/Mode button to select it.
• Use the Play/Bluetooth, Previous Track, Next Track, and volume buttons as described for Bluetooth playback.

3. Call Functions

• When a call comes in during Bluetooth connection, the music will pause.
• Short press the Calling button to answer the call.
• Short press the Calling button again to end the call.
• Press and hold the Calling button to reject an incoming call.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker's surface. Do not use abrasive cleaners, alcohol, or other chemical solvents, as these may damage the finish.
• Storage: When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Water Resistance: This speaker is not waterproof. Avoid exposing it to water or excessive moisture.
• Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use, to maintain battery health.

Troubleshooting

Specifications

Warranty and Support

Your MIFA F1 Portable Bluetooth Speaker comes with a warranty card included in the package. Please refer to the warranty card for specific terms and conditions regarding warranty coverage.

For technical support, service, or further inquiries, please contact your local retailer or visit the official MIFA website for contact information.

Please retain your proof of purchase for warranty claims.