1. Introduction
This manual provides essential instructions for the safe and effective use of your Invacare OEM 8 Amp Battery Charger, Model 1123249. This charger is designed for use with Invacare power wheelchairs and scooters, ensuring proper battery maintenance and longevity. Please read this manual thoroughly before operating the charger and retain it for future reference.
Figure 1: Invacare OEM 8 Amp Battery Charger (Model 1123249). This image displays the charger unit, its AC power cord, and the 3-pin XLR male connector used for connecting to compatible Invacare power wheelchairs and scooters.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in electric shock, fire, or serious injury.
- Read all instructions before using the battery charger.
- Do not expose the charger to rain, moisture, or excessive humidity.
- Use this charger only with the specified Invacare power wheelchairs and scooters, and compatible batteries (22NF or Group 24).
- Ensure the charger is connected to a grounded electrical outlet.
- Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged. Contact Invacare customer support for inspection or repair.
- Never attempt to open or modify the charger. There are no user-serviceable parts inside.
- Keep the charger away from flammable materials and ensure adequate ventilation during operation.
- Disconnect the charger from the power outlet before attempting any cleaning or maintenance.
- California Proposition 65 Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3. Package Contents
Verify that all items are present in the package:
- Invacare OEM 8 Amp Battery Charger (Model 1123249)
- AC Power Line Cord
4. Product Features
- Output: 8 Amp charging capability.
- Connector: Equipped with a 3-pin XLR male connector for secure attachment.
- Design: Off-board charger design.
- Compatibility: Specifically designed as a replacement part for Invacare power wheelchairs and scooters.
5. Setup
- Position the Charger: Place the charger on a stable, flat surface in a well-ventilated area, away from direct sunlight, heat sources, and moisture.
- Connect to Wheelchair/Scooter: Locate the charging port on your Invacare power wheelchair or scooter. Insert the 3-pin XLR male connector from the charger firmly into the charging port. Ensure a snug connection.
- Connect to Power Outlet: Plug the AC power line cord into a standard, grounded electrical wall outlet (100-240V AC, 50/60Hz).
The charger should now be ready for operation. Refer to the "Operating Instructions" section for details on charging your device.
6. Operating Instructions
Once the charger is properly set up and connected:
- The charger will automatically begin the charging process.
- Monitor the charging indicator lights on your power wheelchair or scooter, or on the charger itself if present (refer to your device's manual for specific indicator meanings).
- Charging times may vary depending on the battery's state of discharge and capacity.
- Once the battery is fully charged, the indicator light will typically change color or turn off.
- To disconnect, first unplug the AC power cord from the wall outlet, then disconnect the 3-pin XLR connector from your wheelchair or scooter.
It is recommended to charge batteries regularly to maintain optimal performance and extend battery life.
7. Compatibility
This Invacare OEM 8 Amp Battery Charger (Model 1123249) is compatible with the following:
- Invacare Power Wheelchairs: Storm Series, Pronto Series, TDX Series, Power Tiger, Xterra GT, and other compatible Invacare power wheelchairs.
- Invacare Scooters: Various Invacare scooter models.
- Battery Types: Can be used with 22NF or Group 24 Batteries.
Always verify compatibility with your specific device model before use.
8. Maintenance
- Cleaning: Disconnect the charger from all power sources before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cable Care: Regularly inspect the AC power cord and the 3-pin XLR connector for any signs of damage, fraying, or bent pins. Do not use if damaged.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not turning on / No indicator lights |
|
|
| Battery not charging |
|
|
| Unusual noises or smells from charger | Internal fault. | Immediately disconnect the charger from both the wall outlet and the device. Do not use. Contact Invacare customer support. |
10. Specifications
| Model Number: | 1123249 |
| Brand: | Invacare |
| Output Current: | 8 Amps |
| Connector Type: | 3-pin XLR Male |
| Input Voltage: | AC Power Line Cord (Standard 100-240V AC, 50/60Hz compatible) |
| Package Dimensions: | 9.25 x 8.54 x 6.42 inches |
| Weight: | Approximately 0.01 ounces (Note: This weight seems incorrect from source data, likely a typo for the product itself, but adhering to source) |
11. Warranty and Support
For warranty information, technical support, or replacement parts, please contact Invacare directly.
Invacare Customer Support:
- Phone: 1-800-333-6900
- Website: www.invacare.com (General Invacare website for further information)
Please have your product model number (1123249) available when contacting support.
