Introduction
The Uniden AppCam26PT is an indoor HD pan/tilt IP camera designed for surveillance. It features motorized pan/tilt functionality, a built-in microphone, and a micro SD card slot for local storage. This manual provides instructions for setting up, operating, and maintaining your camera to ensure optimal performance.
Image: Front view of the Uniden AppCam26PT HD Indoor WiFi IP Camera, showcasing its compact design.
Safety Information
- Read all instructions carefully before use.
- Use only the power adapter supplied with the camera.
- Do not expose the camera to water or moisture. This product is for indoor use only.
- Avoid placing the camera near heat sources or in direct sunlight.
- Keep out of reach of children.
- Do not attempt to disassemble or modify the camera. This will void the warranty.
Package Contents
Verify that all items are present in your package:
- Uniden AppCam26PT HD Indoor WiFi IP Camera
- Power Adapter
- Mounting Hardware (screws, wall anchors)
- Ethernet Cable
- Quick Start Guide
Setup
1. Physical Installation
- Choose a Location: Select an indoor location with a clear view of the area you wish to monitor and within range of your Wi-Fi router. The camera can be placed on a flat surface or mounted to a ceiling.
- Power Connection: Connect the power adapter to the camera's power input and then plug it into a standard electrical outlet. The camera will power on and begin its startup sequence.
- Optional Mounting: If mounting, use the provided screws and wall anchors to secure the camera to the desired surface. Ensure the camera is stable and securely fastened.
2. App Installation
- Download the App: Search for the "Uniden AppCam" application in your smartphone's app store (e.g., Apple App Store or Google Play Store).
- Install and Register: Install the app and follow the on-screen instructions to create an account or log in if you already have one.
3. Wi-Fi Connection
The AppCam26PT supports simple Wi-Fi direct setup (P2P Connection).
- Add Camera: Open the Uniden AppCam app and select the option to add a new camera.
- Follow In-App Instructions: The app will guide you through the process of connecting the camera to your home Wi-Fi network. This typically involves scanning a QR code on the camera or entering your Wi-Fi credentials.
- Confirmation: Once connected, the camera's status indicator will change, and you will see the camera listed in your app.
4. Initial Configuration
- Set Camera Name: Assign a descriptive name to your camera (e.g., "Living Room Camera").
- Time Zone: Configure the correct time zone for accurate timestamping of recordings.
- Micro SD Card (Optional): Insert a micro SD card (up to 32GB, sold separately) into the designated slot for local recording. Format the card through the app if prompted.
Operating
1. Live View
Access the Uniden AppCam app and select your camera to view the live video feed. The live view allows real-time monitoring of your surveillance area.
2. Pan/Tilt Control
The AppCam26PT features motorized pan and tilt. In the live view screen of the app, drag your finger across the video feed to remotely adjust the camera's viewing angle horizontally (pan) and vertically (tilt).
3. Recording
- Manual Recording: While in live view, tap the record button in the app to start or stop manual recording to the inserted micro SD card or your connected device.
- Motion Recording: Enable motion detection in the camera settings within the app. The camera will automatically record when motion is detected.
- Remote Recording: You can initiate recording remotely via the smartphone or tablet app.
4. Night Vision
The camera is equipped with an IR Cut Filter Switch and night vision capabilities, providing a range of up to 25 feet in low-light or dark conditions. The camera automatically switches to night vision mode when ambient light is insufficient.
5. Two-Way Audio
Utilize the built-in microphone to listen to audio from the camera's location. If supported by the app, you may also be able to speak through the camera's speaker for two-way communication.
6. Remote Access
Access recorded video and live feeds remotely via your smartphone or tablet from any location with an internet connection, using the Uniden AppCam application.
Maintenance
1. Cleaning
Gently wipe the camera lens and exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
2. Firmware Updates
Periodically check the Uniden AppCam app for available firmware updates. Keeping your camera's firmware up-to-date ensures optimal performance and access to new features.
3. SD Card Management
If using a micro SD card for recording, regularly review and manage stored footage. Format the SD card periodically through the app to maintain recording efficiency.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Camera not connecting to Wi-Fi | Ensure your Wi-Fi password is correct. Move the camera closer to the router. Restart the camera and your router. Verify your router is broadcasting a 2.4GHz Wi-Fi signal. |
| No live video feed | Check internet connection on your smartphone and camera. Restart the camera. Ensure the camera is powered on. |
| Night vision not working | Ensure the camera is in a dark environment for night vision to activate automatically. Check camera settings in the app for night vision options. |
| Cannot record to SD card | Ensure a micro SD card (up to 32GB) is inserted correctly. Format the SD card through the app. Check if the SD card is full. |
| App is unresponsive or crashes | Close and reopen the app. Update the app to the latest version. Restart your smartphone. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | AppCam26PT |
| Connectivity Protocol | Ethernet, Wi-Fi |
| Wireless Communication Technology | Wi-Fi |
| Video Capture Resolution | 720p (Effective 720 Pixels) |
| Frame Rate | Up to 20 fps |
| Video Capture Format | H.264 |
| Storage | Micro SD Card slot (supports up to 32GB, not included) |
| Night Vision Range | Up to 25 feet |
| Audio | Built-in Microphone |
| Control Method | App (Smartphone/Tablet) |
| Indoor/Outdoor Usage | Indoor |
| Special Features | Motion Sensor, Night Vision, Motorized Pan/Tilt |
| Power | 12 Volts |
| Dimensions (L x W x H) | 9.7 x 10.8 x 10.8 inches |
| Item Weight | 2.03 pounds |
Warranty and Support
For warranty information and technical support, please refer to the official Uniden website or contact Uniden customer service. Keep your purchase receipt as proof of purchase for warranty claims.
Uniden Website: www.uniden.com
