Bond 67836
Bond Manufacturing 67836 Aurora Portable Propane Gas Fire Pit User Manual
Model: 67836 | Brand: Bond
Introduction
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Bond Manufacturing 67836 Aurora Portable Propane Gas Fire Pit. Designed for versatility, this 18.5-inch bronze firebowl is lightweight, sturdy, and suitable for various outdoor settings including wood decks, camping, tailgating, and beach parties. It delivers 54,000 BTUs of heat, features a durable steel frame, and includes a locking lid for easy transport.
Important Safety Information
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
General Safety Precautions:
- Always read and understand the entire manual before assembly or operation.
- Use outdoors only. Do not use in an enclosed area.
- Keep children and pets away from the fire pit during operation.
- Ensure adequate clearance from combustible materials.
- Do not use gasoline or other flammable liquids near the fire pit.
- Never leave the fire pit unattended when in use.
- Allow the fire pit to cool completely before moving or covering.
- Always connect to a 20-pound propane tank (not included) using the provided gas hose and regulator.
- Regularly check for gas leaks using a soapy water solution.
Included Components
The Bond Manufacturing 67836 Fire Pit includes the following:
- Fire Pit Unit (Steel frame with rubbed bronze finish)
- Locking Lid with Carry Handle
- Pumice Stones (for flame distribution)
- Tank Holder Tray (to prevent propane tank from tipping)
- 10-foot Gas Hose and Regulator
Setup and Assembly
Follow these steps to set up your portable propane fire pit:
- Unpack Components: Carefully remove all items from the packaging. Ensure all listed components are present and undamaged.
- Position the Fire Pit: Place the fire pit on a stable, level, non-combustible surface outdoors. Ensure it is away from any flammable materials, structures, or overhead obstructions.
- Arrange Pumice Stones: Distribute the included pumice stones evenly over the burner ring inside the fire pit. Ensure the burner holes are not blocked.
- Connect Propane Tank:
- Place your 20-pound propane tank (not included) securely in the tank holder tray to prevent tipping.
- Connect the 10-foot gas hose and regulator to the propane tank valve. Hand-tighten securely.
- Connect the other end of the gas hose to the inlet on the fire pit's control panel. Hand-tighten securely.
- Check for Leaks: Before first use and after any tank change, perform a leak test.
- Mix a solution of equal parts water and liquid dish soap.
- Ensure the fire pit control knob is in the "OFF" position.
- Slowly open the propane tank valve.
- Apply the soapy solution to all gas connections. If bubbles appear, there is a leak. Immediately close the propane tank valve and tighten connections. Re-test. If leaks persist, do not use the fire pit and contact customer support.

Figure 1: The Bond Aurora Portable Propane Fire Pit with its lid closed, showcasing its compact design and control knob. The unit is ready for transport or storage.
Operating Instructions
Ignition:
- Ensure the propane tank valve is fully open.
- Push and turn the control knob on the fire pit to the "LOW" position while simultaneously pressing the igniter button (if available).
- Hold the knob in for a few seconds after ignition to allow the thermocouple to heat up.
- If the fire does not ignite immediately, turn the knob to "OFF", wait 5 minutes for gas to dissipate, and repeat the ignition process. Do NOT leave the knob ON for very long if it doesn’t light immediately, as gas will build up.
Adjusting Flame:
Once ignited, you can adjust the flame height by rotating the control knob between "LOW" and "HIGH" settings to achieve your desired heat output and ambiance.

Figure 2: The Bond Aurora Portable Propane Fire Pit in operation, showing vibrant flames rising from the pumice stones, providing warmth and ambiance.
Shutting Down:
- Turn the control knob on the fire pit to the "OFF" position.
- Close the valve on the propane tank.
- Allow the fire pit to cool completely before handling or covering.
Official Product Video:
Video 1: An official product video from Bond Manufacturing Co. demonstrating the portability and ease of use of the fire pit, including its quick setup and the locking lid feature for transport. It highlights the fire pit's suitability for camping and outdoor events.
Maintenance
- Cleaning: Clean the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals.
- Pumice Stones: Periodically inspect the pumice stones for debris or blockages. Clean as needed.
- Storage: When not in use, especially during off-season or inclement weather, store the fire pit in a cool, dry place. Ensure the locking lid is securely in place to protect the burner and stones.
- Connections: Regularly check all gas connections for tightness and signs of wear.
Troubleshooting
Fire Pit Does Not Ignite:
- No Gas Flow: Ensure the propane tank valve is fully open and the tank is not empty. Check for kinks in the gas hose.
- Igniter Issue: If the igniter button does not produce a spark, try lighting the fire pit manually with a long lighter or match while turning the knob to "LOW" (exercise extreme caution). If manual ignition works, the igniter may need replacement.
- Gas Build-up: If multiple ignition attempts fail, turn off the gas at the tank and the fire pit, wait 5-10 minutes for gas to clear, then reattempt ignition.
- Blocked Burner: Ensure pumice stones are not blocking the burner holes.
Low Flame or Inconsistent Flame:
- Low Propane: The propane tank may be running low.
- Over-filling Protection: If the propane tank was recently refilled, the over-filling protection device might have been triggered, restricting gas flow. Turn off the fire pit and tank, disconnect the hose, wait a few minutes, then reconnect and slowly open the tank valve.
- Regulator Issue: A faulty regulator can cause low gas pressure.
Product Specifications
| Brand | Bond |
| Model Number | 67836 |
| Material | Stainless Steel, Metal |
| Product Dimensions | 18.5"D x 18.5"W x 14.65"H |
| Style | Bronze |
| Finish Type | Bronze Finish |
| Shape | Round |
| Item Weight | 18 Pounds |
| Fuel Type | Liquefied Petroleum Gas |
| BTU Output | 50,000 BTU |
| UPC | 808112998488, 034613678363, 804067314540, 801947296521, 034613674631 |
Warranty and Support
For detailed warranty information, additional support, or to download the complete user manual, please refer to the official PDF document:
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.


