TrickleStar TS0006 4 Outlet Advanced Powertap Instruction Manual

Introduction

The TrickleStar TS0006 4 Outlet Advanced Powertap is designed to provide premium quality, fireproof surge protection for your PC and TV peripherals. It intelligently eliminates standby power consumed by peripherals, helping to protect your electronics and reduce energy waste. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device, ensuring safe and efficient use.

Product Overview

The TrickleStar TS0006 features LED status indicators for Ground, Surge Status, Control, Always On Outlet, and Switched Outlets. It includes 4 outlets: 1 Control Outlet, 1 Always On Outlet, and 2 Switched Outlets. The power tap also has selectable switching thresholds (18W / 35W / All On) for customized energy management. It offers 72,000 amps / 1080 Joules fireproof, ceramic surge protection and less than 48 dB noise filtering.

Figure 1: Angled view of the TrickleStar TS0006 4 Outlet Advanced Powertap, showing the surge, ground, and switched LED indicators, along with the 'always on', 'control', and 'switched' outlets.

Figure 2: Top-down view of the TrickleStar TS0006 4 Outlet Advanced Powertap, highlighting the distinct labeling for 'always on', 'control', and 'switched' outlets, and the LED indicators.

Setup Instructions

Follow these steps to set up your TrickleStar TS0006 Advanced Powertap:

1. Plug in the Control Device: Connect your primary device (e.g., TV or PC) into the outlet labeled "control". This device will dictate the power state of the "switched" outlets.
2. Connect Always On Devices: Plug any electronics that require constant power (e.g., router, modem, DVR) into the outlets labeled "always on". These outlets will remain powered regardless of the control device's state.
3. Attach Switched Devices: Connect peripherals that you want to power on/off with your control device (e.g., DVD player, printer, speakers) into the outlets labeled "switched". These outlets will receive power only when the control device is active.
4. Adjust Threshold (if applicable): If your model has an adjustable threshold switch, set it according to your control device's power consumption. Refer to the suggested settings for optimal performance (e.g., High for large LCD/LED TVs or desktop PCs, Low for laptops).
5. Plug in the Powertap: Finally, plug the TrickleStar TS0006 power cord into a grounded wall outlet.

For a visual guide, please watch the official setup video:

Operating Instructions

Once set up, operating your TrickleStar TS0006 is straightforward:

• Automatic Power Control: When you turn on your control device (e.g., TV or PC), the TrickleStar Powertap will automatically supply power to the "switched" outlets. When you turn off your control device, power to the "switched" outlets will be cut, eliminating standby power consumption.
• Always On Functionality: Devices plugged into the "always on" outlets will remain powered continuously, regardless of the control device's state.
• LED Indicators: Monitor the LED indicators on the powertap for status updates:
  • Surge: Indicates active surge protection.
  • Ground: Confirms proper grounding.
  • Switched: Shows when power is supplied to the switched outlets.

Safety Information

TrickleStar products are designed with multiple safety features to protect users and connected devices. Please adhere to the following safety guidelines:

• UL Certified: All TrickleStar products are certified to the latest UL safety standards, ensuring compliance with industry benchmarks for safety and testing. The factory is inspected and certified annually by UL.
• Heavy-Duty Power Cord and Plug: The powertap uses a heavy-duty power cord rated to 15 Amps and high-quality flat plugs that are resistant to bending or damage.
• UL94 V-0 Rated Plastic Material: Constructed with UL94 V-0 rated plastic, which is significantly less flammable than lower-rated plastics used by many other brands. This thicker, stronger plastic also makes the enclosure more rigid and less likely to fracture.
• Safety Screws: Equipped with safety screws to prevent unauthorized opening of the unit, reducing the risk of electrocution.
• LED Indicators: The LED indicator lenses are molded into the casing to prevent moisture ingress, which could lead to electrical hazards.
• Child Safety Protection Covers: Features child safety protection covers to prevent children from inserting objects into unused outlets.
• High-Quality Circuit Breaker: Utilizes a heavy-duty, high-quality circuit breaker with a molded enclosure that protects it and allows it to operate freely, preventing it from being jammed by furniture.
• Heat Shrink Internal Power Cable: Internal power cables are dressed in heat shrink and physically separated to prevent touching and increasing internal temperatures.
• FR-4 Printed Circuit Board Materials: Uses FR-4 (flame resistant) printed circuit board materials, the highest flame retardant rating, ensuring burning stops within 10 seconds in case of an issue.
• Thermal Circuit Breaker: Includes two thermal safety fuses (one on the PCB, one near the MOVs) that will blow and cut off power in the event of an over-temperature condition.
• Ceramic Encased Metal Oxide Varistors (MOVs): Patented ceramic-encased MOVs prevent fire in the event of an abnormal electrical surge. These MOVs suppress more energy, dissipate heat faster, and eliminate fire risks from MOV failures.
• Crimped and Soldered Jumper Cables: Jumper cables are crimped with a special connector before insertion and soldering onto the PCB, preventing splaying and dangerous arcing. Internal jumper cables are also spot welded and soldered for a strong, reliable electrical connection that prevents arcing and heat buildup.

For more detailed safety information, please watch the official safety video:

Maintenance

To ensure the longevity and optimal performance of your TrickleStar TS0006 Advanced Powertap, follow these maintenance tips:

• Keep Clean: Regularly wipe the exterior of the powertap with a dry, soft cloth. Avoid using liquid cleaners or abrasive materials.
• Avoid Moisture: Do not expose the powertap to moisture, water, or excessive humidity. Ensure it is used in a dry indoor environment.
• Inspect Cords: Periodically check the power cord and connected device cords for any signs of damage, fraying, or overheating. Replace damaged cords immediately.
• Proper Ventilation: Ensure the powertap is placed in an area with adequate ventilation to prevent overheating. Do not cover it with cloths or other materials.

Troubleshooting

If you encounter issues with your TrickleStar TS0006, try the following troubleshooting steps:

• No Power to Switched Outlets:
  • Ensure the control device is properly plugged into the "control" outlet and is powered on.
  • Check the threshold switch setting (if applicable) to ensure it matches your control device's power consumption.
  • Verify that the powertap's main circuit breaker has not tripped. If it has, reset it by pressing the button.
• No Power to Any Outlet:
  • Check if the powertap is securely plugged into a working wall outlet.
  • Inspect the wall outlet by plugging in another device to confirm it has power.
  • Check the powertap's main circuit breaker and reset if tripped.
• Surge LED Off: If the "surge" LED indicator is off, it means the surge protection has been compromised (e.g., after a major power surge). The powertap may still provide power, but it will no longer protect against surges. It is recommended to replace the unit.
• Ground LED Off: If the "ground" LED indicator is off, it indicates an improper ground connection. This can compromise surge protection. Ensure the wall outlet is properly grounded.

If the issue persists after attempting these steps, please contact TrickleStar customer support.

Specifications

Warranty and Support

TrickleStar is committed to providing high-quality products and excellent customer service. We offer a flexible Connected Device Warranty with up to $20,000 in coverage, without requiring product registration to validate the warranty.

Our products undergo rigorous functional and electrical quality control tests before shipment. We also utilize independent third-party inspectors (SGS, HQTS) to randomly sample and inspect units, ensuring quality standards are maintained. Each unit is production batch coded and serialized for traceability.

TrickleStar maintains product liability insurance provided by Lloyd's of London and SART, offering comprehensive coverage of $8 million per occurrence.

For more information or support, please contact us:

• Website: www.tricklestar.com
• Phone: 1-888-700-1098
• Email: customer.service@tricklestar.com