Introduction
This manual provides essential instructions for the safe and effective use of your Sanitas SFB07 Essentials Foot Spa. Please read all instructions carefully before first use and retain this manual for future reference.
The Sanitas SFB07 is designed to provide a relaxing foot bath experience with vibration massage, bubble massage, and a textured massage attachment for reflex zones. It features water tempering technology to help maintain water temperature and an integrated splash protector for convenience.
Safety Information
Important Safety Instructions:
- Always ensure the foot spa is placed on a firm, level surface.
- Do not operate the foot spa if the power cord or plug is damaged.
- Do not immerse the appliance in water.
- Keep out of reach of children.
- Unplug the appliance from the power outlet after use and before cleaning.
- Do not use if you have open wounds, skin infections, or any medical conditions that may be aggravated by foot massage or heat. Consult a physician if unsure.
- Fill with water before plugging in and operating.
- Do not stand in the foot spa.
- Use only clean water.
Product Overview
Familiarize yourself with the components of your Sanitas SFB07 Foot Spa.
Image 1: Top-down view of the Sanitas SFB07 Foot Spa, showing the main basin, central control button, and textured massage attachment.
- Main Basin: For holding water and feet.
- Control Button: Activates vibration and bubble functions.
- Textured Massage Attachment: Removable attachment for targeted reflex zone massage.
- Integrated Massaging Nodules: Located on the footrest for additional massage.
- Splash Protector: Integrated cover to minimize water spills.
Setup
- Place the foot spa on a stable, flat, and dry surface.
- Ensure the power cord is easily accessible and not obstructed.
- Fill the foot spa with warm water up to the indicated maximum fill line. Do not overfill.
- You may add foot bath salts or essential oils suitable for foot spas, following their specific instructions.
- Plug the power cord into a suitable electrical outlet.
Operating Instructions
Using the Foot Spa
- After filling and plugging in, sit comfortably and place your feet into the foot spa.
- Press the control button to activate the vibration and bubble massage functions. The water tempering technology will begin to help maintain the water temperature.
- For enhanced massage, move your feet over the integrated massaging nodules on the footrest.
- Observe the bubble massage in action, providing a soothing sensation.
- To use the textured massage attachment, gently rub your foot over it to stimulate reflex zones. This attachment can be used for targeted relief.
- Enjoy your foot spa session for a recommended duration of 10-20 minutes.
- To turn off, press the control button again.
- Remove your feet from the foot spa and unplug the appliance from the power outlet.
Image 2: A hand pressing the central control button to activate the foot spa functions.
Image 3: Feet immersed in the foot spa, showing the bubble massage in action.
Image 4: A foot engaging with the textured massage attachment for reflexology.
Maintenance and Cleaning
- Draining: After each use, unplug the foot spa and carefully pour out the water.
- Cleaning: Wipe the interior and exterior surfaces with a damp cloth and mild detergent. Do not use abrasive cleaners or immerse the unit in water.
- Drying: Ensure all parts are thoroughly dry before storing.
- Storage: Store the foot spa in a cool, dry place, away from direct sunlight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Foot spa does not turn on. | Not plugged in; power outlet malfunction; unit malfunction. | Check power cord connection; test outlet with another device; contact customer support if issue persists. |
| Bubbles/Vibration are weak. | Water level too high/low; debris in jets. | Adjust water level to the recommended line; clean jets if visible obstruction. |
| Water cools down too quickly. | Water tempering technology is for maintenance, not heating; initial water was not warm enough. | Start with adequately warm water. The unit helps maintain, not heat, the water. |
| Excessive splashing. | Overfilling; vigorous foot movement. | Ensure water is filled only to the maximum line; reduce vigorous foot movement. |
Specifications
- Model: SFB07
- Brand: SANITAS
- Dimensions: 14.96 x 13.58 x 5.12 inches
- Weight: Approximately 1.32 Grams
- Power Source: Corded Electric
- Material: Rubber (for certain components)
- Functions: Vibration massage, bubble massage, water tempering, integrated massaging nodules, textured massage attachment.
Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or contact Sanitas customer service. Contact details can typically be found on the manufacturer's official website or on the product packaging.
Manufacturer: Beurer
Legal Disclaimer
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is intended for personal relaxation and comfort, not for medical treatment.
