Introduction
This manual provides essential instructions for the safe and efficient operation, maintenance, and care of your Toastmaster TM-91CN Standard Electric Can Opener. Please read all instructions thoroughly before first use and retain this manual for future reference.
Important Safety Instructions
- Read all instructions before operating the appliance.
- To protect against electrical hazards, do not immerse the appliance, cord, or plug in water or other liquids.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
- Avoid contact with moving parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Contact customer service for examination, repair, or adjustment.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Do not use outdoors.
- Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Do not use the appliance for other than intended use.
- The blade is sharp. Handle with care.
Parts Identification
Familiarize yourself with the components of your electric can opener.
- A. Cutting Lever: Engages the cutting blade with the can.
- B. Cutting Blade: Pierces and cuts the can lid.
- C. Drive Wheel: Rotates the can during operation.
- D. Magnetic Lid Holder: Holds the can lid after cutting.
- E. Knife Sharpener Slot: Used for sharpening non-serrated knives.
- F. Bottle Opener: Integrated tool for opening bottle caps.
- G. Pop-Top Opener: Integrated tool for opening cans with pop-tops.
Image: The Toastmaster TM-91CN Electric Can Opener showing its main body, the removable cutting lever, and the separate bottle opener attachment. This view highlights the components for assembly and cleaning.
Setup
- Unpack the can opener and all its components.
- Wipe the exterior of the unit with a damp cloth. Wash the removable cutting lever in warm, soapy water, rinse thoroughly, and dry completely.
- Ensure the cutting lever is securely attached to the main unit.
- Place the can opener on a flat, stable surface.
- Plug the power cord into a standard electrical outlet. The unit is now ready for use.
Operating Instructions
Using the Can Opener
- Lift the cutting lever to its upright position.
- Position the can so that the rim is under the cutting blade and against the drive wheel.
- Press the cutting lever down firmly until the cutting blade pierces the can lid. The can opener will automatically start cutting and rotating the can.
- Hold the can lightly during operation. Do not force the can.
- Once the can has completed a full rotation and the lid is fully cut, the can opener will stop automatically.
- Lift the cutting lever to release the can. The magnetic lid holder will retain the lid.
- Carefully remove the lid from the magnetic holder and dispose of it.
Using the Knife Sharpener
The integrated knife sharpener is located on the back of the unit.
- Ensure the can opener is unplugged before using the knife sharpener.
- Hold the knife with the blade facing away from you.
- Insert the knife blade into the knife sharpener slot, ensuring the blade is centered.
- Pull the knife slowly and steadily towards you, applying light downward pressure.
- Repeat this process 3-5 times, or until the desired sharpness is achieved.
- Caution: Do not sharpen serrated knives. Always clean the knife blade after sharpening.
Image: A kitchen knife is shown being sharpened using the dedicated slot located on the rear of the Toastmaster TM-91CN Electric Can Opener. This demonstrates the proper technique for utilizing the sharpening feature.
Using the Bottle Opener
The bottle opener is located on the side of the unit.
- Ensure the can opener is unplugged before using the bottle opener.
- Place the edge of the bottle opener under the cap of a bottle.
- Apply upward pressure to the handle of the bottle opener to pry off the cap.
Image: A glass bottle is positioned with its cap under the integrated bottle opener on the side of the Toastmaster TM-91CN Electric Can Opener, illustrating its use.
Using the Pop-Top Opener
The pop-top opener is located on the top of the unit, near the cutting lever.
- Ensure the can opener is unplugged before using the pop-top opener.
- Hook the tip of the pop-top opener under the tab of a pop-top can.
- Gently lift the handle of the pop-top opener to break the seal and open the can.
Image: A pop-top can is shown with its tab engaged by the integrated pop-top opener on the Toastmaster TM-91CN Electric Can Opener, demonstrating how to open such cans.
Cleaning and Maintenance
- Always unplug the can opener from the electrical outlet before cleaning.
- To remove the cutting lever for cleaning, lift it to its upright position and pull it gently outwards from the unit.
- Wash the removable cutting lever in warm, soapy water. Rinse thoroughly and dry completely before reattaching.
- Wipe the exterior of the can opener with a damp cloth. Do not immerse the main unit in water or any other liquid.
- Do not use abrasive cleaners or scouring pads, as they may scratch the surface.
- Ensure all parts are dry before storing or re-using the appliance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Can opener does not operate. | Unit is not plugged in. | Ensure the power cord is securely plugged into a working electrical outlet. |
| Can opener does not operate. | Cutting lever not fully engaged. | Press the cutting lever down firmly until the blade pierces the can. |
| Can does not rotate or cut properly. | Can is not positioned correctly. | Reposition the can so the rim is properly aligned under the cutting blade and against the drive wheel. |
| Can does not rotate or cut properly. | Cutting blade or drive wheel is dirty. | Clean the cutting lever assembly as per the "Cleaning and Maintenance" section. |
| Lid falls into can. | Magnetic lid holder not engaging. | Ensure the can is properly aligned and the magnet can hold the lid. Clean any debris from the magnet. |
Specifications
- Model Number: TM-91CN
- Brand: Toastmaster
- Colour: Black
- Material: Polypropylene
- Blade Material: Stainless Steel
- Operation Mode: Automatic
- Product Dimensions: 38.2 x 26.7 x 16.99 cm
- Item Weight: 907 g
Warranty and Support
This Toastmaster TM-91CN Standard Electric Can Opener is covered by a 1-year manufacturer's limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal household use.
The warranty does not cover damage resulting from misuse, abuse, accident, alteration, or commercial use. For warranty service or technical support, please refer to the contact information provided with your purchase documentation or visit the official Toastmaster website.
