Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your JERDON HL88NLD Wall-Mounted Vanity Mirror with Lights. This hardwired makeup mirror features 8X magnification and a sleek nickel finish, designed for convenience and enhanced visibility. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Important Safety Information
CAUTION: This mirror requires hard-wiring and should be installed by a licensed electrician. Always turn off the power at the circuit breaker before installing or removing the mirror. Do not attempt to install or repair the electrical components yourself. Keep the mirror away from water and heat sources. In case of breakage, handle with care to avoid injury from sharp edges.
Product Overview
The JERDON HL88NLD mirror is a wall-mounted, two-sided vanity mirror with integrated LED lighting and an extendable arm. It offers both standard (1X) and magnified (8X) views, making it suitable for various grooming and makeup tasks. The nickel finish provides a modern aesthetic, complementing various bathroom decors.

Image: The JERDON HL88NLD Wall-Mounted Vanity Mirror with Lights, showcasing its sleek design and integrated lighting, mounted on a wall above a sink.
Package Contents
- JERDON HL88NLD Wall-Mounted Vanity Mirror Unit
- Mounting Hardware (screws, anchors)
- Instruction Manual
Setup and Installation
Electrical Installation (Hardwired Model)
This mirror is designed for direct wire installation, meaning it does not use a power cord or plug. It requires a junction box with a live wire at the mounting location. Due to the electrical nature of this installation, it is strongly recommended that a licensed electrician performs the installation to ensure safety and compliance with local electrical codes.

Image: A close-up of the mirror's base, indicating it is a direct wire model requiring professional electrical installation into a junction box.
Mounting the Mirror
- Prepare the Wall: Identify a suitable location on the wall, preferably near an existing electrical junction box for hardwiring. Ensure the wall surface is clean and dry.
- Mark Drilling Points: Hold the mounting bracket against the wall at the desired height and use a pencil to mark the drilling points for the screws.
- Drill Holes: Drill pilot holes at the marked points. If mounting into drywall, insert appropriate wall anchors.
- Secure Mounting Bracket: Attach the mounting bracket to the wall using the provided screws, ensuring it is level and secure.
- Connect Electrical Wiring: (For licensed electrician) Connect the mirror's wiring to the household electrical wiring within the junction box, following all safety guidelines and local codes.
- Attach Mirror Unit: Carefully align the mirror's base with the mounting bracket and secure it using the designated fasteners.
- Test Functionality: Restore power at the circuit breaker and test the mirror's light and swivel functions.
Operating Instructions
Magnification
Your JERDON vanity mirror features two magnification levels: 1X (true image) and 8X (magnified). To switch between magnifications, simply rotate the mirror head 360 degrees. The 1X side is ideal for general viewing and makeup application, while the 8X side provides a close-up view for detailed tasks like tweezing or precise eyeliner application.

Image: The two-sided mirror head, illustrating the 8X magnification for detailed tasks and the 1X side for standard viewing.
Lighting
The mirror is equipped with long-lasting 5-watt LED bulbs, offering multiple light settings. A switch located on the base of the mirror allows you to toggle between natural, yellow-tinted light (3000K) and bright, cool-toned lighting (6000K). Select the lighting mode that best suits your needs for optimal visibility.

Image: The vanity mirror with its LED lights illuminated, providing clear and bright illumination for grooming.
Adjusting the Mirror
The mirror features a 13.5-inch extendable arm and a 360-degree swivel head, allowing for flexible positioning. You can extend the arm to bring the mirror closer, retract it to save space, and tilt or rotate the mirror head to achieve your desired viewing angle.

Image: Diagram showing the mirror's dimensions, including its 8.5-inch diameter and the 13.5-inch extension from the wall.

Image: An illustration demonstrating the mirror's two-sided swivel with 360-degree rotation for versatile use.
Maintenance
To maintain the appearance and functionality of your mirror, follow these simple guidelines:
- Cleaning the Mirror Surface: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to avoid liquid seeping into the electrical components.
- Cleaning the Finish: Wipe the nickel finish with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they can damage the finish.
- Bulb Replacement: The LED bulbs are designed for long-lasting performance and are generally not user-replaceable. If the lights malfunction, please contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights not working | Power off at circuit breaker; loose electrical connection; faulty switch; LED failure. | Check circuit breaker. Ensure switch is in 'on' position. If hardwired, consult a licensed electrician to check connections. |
| Mirror arm is stiff or loose | Joints need lubrication; mounting screws are loose. | Apply a small amount of silicone lubricant to the arm joints. Check and tighten mounting screws if necessary. |
| Mirror wobbles on wall | Improper installation; loose mounting hardware. | Ensure mounting hardware is securely fastened to the wall studs or appropriate anchors. Re-check installation steps. |
Specifications
| Feature | Detail |
|---|---|
| Brand | JERDON |
| Model Number | HL88NLD |
| Product Dimensions | 14"L x 10"W |
| Mirror Diameter | 8.5 inches |
| Magnification | 1X / 8X |
| Lighting Type | LED (5-watt) |
| Light Color Temperature | 3000K (Yellow-tinted), 6000K (Cool-toned) |
| Finish Type | Nickel |
| Mounting Type | Wall Mount (Direct Wire) |
| Extendable Arm Length | 13.5 inches |
| Item Weight | 3.5 Pounds |
| Material | Alloy Steel |
| UPC | 874479002717 |
Official Product Videos
GURUN Wall Mounted Makeup Mirror
Video: An official product video from GURUN showcasing the features and functionality of a wall-mounted makeup mirror. This video demonstrates the mirror's design and usability.
Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or visit the official JERDON website. You may also contact JERDON customer service directly for assistance with any product-related inquiries or issues.