Broan-NuTone AER80K

Download PDF
Contents

Broan-NuTone AER80K 80 CFM CleanCover Bathroom Exhaust Fan

Model: AER80K | Brand: Broan-NuTone

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Broan-NuTone AER80K 80 CFM CleanCover Bathroom Exhaust Fan. Please read all instructions carefully before beginning installation to ensure safe and proper operation.

Broan-NuTone AER80K 80 CFM CleanCover Bathroom Exhaust Fan

Image: The Broan-NuTone AER80K 80 CFM CleanCover Bathroom Exhaust Fan, featuring a sleek white grille and integrated duct connection.

Safety Information

WARNING: To reduce the risk of fire, electric shock, or injury to persons, observe the following:

  • Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.
  • Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
  • Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
  • Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back-drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
  • When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
  • Ducted fans must always be vented to the outdoors.
  • This unit is UL listed for use over bathtubs or showers when connected to a GFCI-protected branch circuit (not included).
  • This unit is UL listed for use in insulated ceilings (Type I.C.).

Specifications

ModelAER80K
Air Flow Capacity80 Cubic Feet Per Minute (CFM)
Noise Level0.7 Sones (Ultra-Quiet)
Power SourceAC (120V)
Product Dimensions (D x W x H)9.25" x 10" x 5.75"
Ceiling Construction Fit2" x 6"
Duct Connector4" Round with Damper
CertificationsENERGY STAR Certified, UL Listed (for use over bathtubs/showers with GFCI, and in insulated ceilings Type I.C.), HVI-2100 Certified
Installation TypeRoom-side installation
Included ComponentsBath Fan
Item Weight9 Pounds
Broan-NuTone AER80K fan dimensions and certifications

Image: Detailed view of the fan housing with key dimensions and certification logos.

Package Contents

  • Broan-NuTone AER80K Exhaust Fan Unit
  • CleanCover Grille
  • SnapFit Flange Kit
  • EzDuct Connector
  • FoldAway Mounting Ears
  • Installation Template
  • Instruction Manual (this document)

Installation

The Broan-NuTone AER80K is designed for room-side installation, eliminating the need for attic access. This makes it ideal for retrofit, remodeling, and replacement projects.

  1. Preparation: Ensure power is disconnected at the service panel before starting. Use the provided template to accurately mark and cut the ceiling opening for the fan housing.
  2. Housing Installation: Insert the fan housing into the ceiling opening. The SnapFit Flange Kit and FoldAway mounting ears facilitate secure placement and a self-trimming finish.
  3. Duct Connection: Connect the 4-inch ductwork to the EzDuct connector on the fan housing. Ensure a tight seal to prevent air leakage.
  4. Electrical Wiring: Connect the electrical wiring according to local codes and the wiring diagram provided in the full manual. Ensure all connections are secure. If installing over a bathtub or shower, connect to a GFCI-protected branch circuit.
  5. Grille Attachment: Once the housing and wiring are complete, attach the CleanCover grille. The design minimizes visible vent slots for a cleaner appearance.
Roomside installation of Broan-NuTone exhaust fan

Image: A person installing the fan housing from the room side, demonstrating the ease of retrofit installation without attic access.

Operating Instructions

The Broan-NuTone AER80K fan operates via a standard wall switch (not included). It is designed for continuous or intermittent operation to manage moisture and odors in your bathroom.

  • Turning On/Off: Activate the fan by flipping the connected wall switch to the 'ON' position. Turn off by flipping the switch to 'OFF'.
  • Optimal Use: For effective moisture and odor control, operate the fan during and after showering or bathing for at least 15-20 minutes. This helps to clear humid air and prevent mildew growth.
Broan-NuTone exhaust fan providing powerful ventilation

Image: Illustration depicting powerful ventilation from the fan, highlighting its 80 CFM airflow and ultra-quiet 0.7 Sones operation.

Maintenance

Regular cleaning and maintenance ensure optimal performance and longevity of your exhaust fan. Always disconnect power before performing any maintenance.

  1. Grille Cleaning: The CleanCover grille is designed for easy cleaning. Gently pull down the grille to detach it from the housing. Wipe the grille with a damp cloth and mild detergent. Avoid abrasive cleaners.
  2. Fan Blade Cleaning: With the grille removed and power disconnected, carefully wipe the fan blades and interior of the housing to remove dust and debris. Do not bend or damage the fan blades.
  3. Reassembly: Once clean and dry, reattach the grille by aligning it with the housing and pushing it firmly into place. Restore power.
Broan-NuTone CleanCover Grille features

Image: Close-up of the CleanCover Grille, emphasizing its seamless design and quiet operation, which also contributes to easier maintenance.

Troubleshooting

ProblemPossible CauseSolution
Fan does not operateNo power, loose wiring, faulty switchCheck circuit breaker/fuse. Verify all wiring connections. Test or replace switch.
Reduced airflow or excessive noiseClogged grille/fan blades, obstructed ductworkClean grille and fan blades. Inspect ductwork for blockages.
Fan runs but moisture persistsInadequate run time, undersized fan for room, excessive air leakageIncrease fan run time. Ensure proper sealing around fan and ductwork. Consider a higher CFM fan if room size exceeds recommendations.

Warranty and Support

The Broan-NuTone AER80K Bathroom Exhaust Fan is backed by a Three Year Limited Warranty. For detailed warranty information, technical support, or to order replacement parts, please visit the official Broan-NuTone website or contact their customer service.

Manufacturer: Broan-NuTone

Website: Visit the Broan-NuTone Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.