Mastercraft Courser MXT (90000020185)

Mastercraft Courser MXT Mud Terrain Radial Tire User Manual

Model: Courser MXT (P/N: 90000020185)

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Mastercraft Courser MXT Mud Terrain Radial Tire. Adhering to these guidelines will ensure optimal performance and longevity of your tire.

Mastercraft Courser MXT Mud Terrain Radial Tire

Image: Mastercraft Courser MXT Mud Terrain Radial Tire. This image displays the tire mounted on a black wheel, showcasing its aggressive tread pattern designed for mud and off-road conditions. The sidewall clearly shows "COURSER MXT" and "MASTERCRAFT" branding.

Setup and Installation

Proper installation is critical for tire safety and performance. It is highly recommended that tire mounting and balancing be performed by a qualified professional using appropriate equipment.

Mounting

  • Ensure the wheel rim is clean, free of rust, and undamaged.
  • Lubricate the tire beads and rim flanges with an approved tire mounting lubricant.
  • Mount the tire onto the rim, ensuring proper bead seating.
  • Inflate the tire slowly to the recommended pressure, ensuring both beads are fully seated. Never exceed 40 PSI (275 kPa) to seat beads unless specified otherwise by the tire manufacturer.

Balancing

After mounting, tires must be balanced to prevent vibrations and ensure even tread wear. Use a dynamic wheel balancer for best results.

Operating Guidelines

Optimal tire performance and safety depend on correct operating practices.

Tire Pressure

Maintain correct tire inflation pressure as specified by your vehicle manufacturer, typically found on a placard in the door jamb, glove compartment, or owner's manual. The maximum pressure for this tire is 35 PSI (240 kPa).

  • Check tire pressure regularly, at least once a month and before long trips, when tires are cold.
  • Under-inflation can lead to excessive heat buildup, reduced fuel efficiency, and premature tire wear.
  • Over-inflation can result in a harsh ride, reduced traction, and uneven tread wear.

Load Capacity

Do not exceed the maximum load capacity of 2535 pounds (1149 kg) per tire. Overloading can cause tire failure and is a safety hazard.

Driving Conditions

The Mastercraft Courser MXT is designed for mud terrain and off-road use, offering excellent traction in challenging conditions. While suitable for year-round use, performance in severe snow may vary compared to dedicated winter tires.

Maintenance

Regular maintenance extends tire life and ensures safe operation.

Tire Rotation

Rotate tires every 5,000 to 8,000 miles (8,000 to 13,000 km) or as recommended by your vehicle manufacturer. This promotes even wear across all tires.

Inspection

  • Regularly inspect tires for signs of damage, such as cuts, punctures, bulges, or cracks.
  • Check tread depth. The minimum legal tread depth is 2/32nds of an inch (1.6 mm). This tire has a tread depth of 20/32nds when new.
  • Remove any stones or debris lodged in the tread grooves.

Cleaning and Storage

Clean tires with mild soap and water. When storing tires, keep them in a cool, dry place away from direct sunlight, heat, and ozone-producing equipment.

Troubleshooting

SymptomPossible CauseSolution
Uneven Tread WearImproper inflation, misalignment, unbalanced tires, worn suspension components.Check and adjust tire pressure. Perform wheel alignment and balancing. Inspect suspension.
Vibration at SpeedUnbalanced tires, bent rim, worn suspension components.Have tires re-balanced. Inspect rims for damage. Check suspension.
Loss of Air PressurePuncture, leaky valve stem, damaged rim, improper bead seating.Inspect tire for punctures. Check valve stem. Have tire professionally inspected and repaired.

Specifications

  • Brand: Mastercraft
  • Model: Courser MXT
  • Size: 35/125R15
  • Section Width: 12.5 Inches
  • Load Capacity: 2535 Pounds
  • Tread Depth (New): 20/32nds
  • Tread Type: Symmetrical
  • Maximum Pressure: 35 PSI (Pound per Square Inch)
  • Ply Rating: 6-Ply
  • Rim Width: 15 Inches
  • Tire Diameter: 35 Inches
  • Construction Type: Radial
  • Item Weight: 27.6 Pounds
  • ASIN: B00MY0QPXA
  • Manufacturer Part Number: 90000020185
  • Date First Available: August 21, 2014

Warranty Information

Mastercraft tires are backed by a limited warranty covering defects in workmanship and materials. Specific warranty terms, conditions, and duration may vary. Please refer to the official Mastercraft Tires website or contact an authorized dealer for complete warranty details.

Keep your purchase receipt as proof of purchase for any warranty claims.

Support

For technical assistance, product inquiries, or warranty claims, please contact Mastercraft customer support or visit their official website.

  • Manufacturer: Mastercraft
  • Website: www.mastercrafttires.com (Example link, actual link may vary)
  • Authorized Dealers: Consult the Mastercraft website for a list of authorized dealers and service centers in your area.

Related Documents - Courser MXT (90000020185)

Preview Mastercraft 4-ft Folding Steel Workbench Assembly Manual (Model 058-0123)
Comprehensive assembly instructions and safety guidelines for the Mastercraft 4-ft Water-Resistant Folding Steel Workbench, model 058-0123. Includes parts list and step-by-step assembly diagrams described in text.
Preview Mastercraft 057-4554-4 Temperature Reader: User Manual and Specifications
Comprehensive guide for the Mastercraft 057-4554-4 Infrared Temperature Reader, including specifications, safety guidelines, quick start instructions, and maintenance.
Preview Mastercraft 7 1/4" Circular Saw with Laser Line (Model 54-8347-0) - Operating Manual and Safety Guide
Comprehensive operating manual and safety guide for the Mastercraft 7 1/4" Circular Saw with Laser Line (Model 54-8347-0). Covers specifications, safe operation, electrical safety, laser safety, assembly, adjustments, maintenance, and warranty.
Preview Mastercraft Belt Sander 054-2437-2 Instruction Manual
Comprehensive instruction manual for the Mastercraft Belt Sander (Model 054-2437-2), covering technical specifications, safety guidelines, operating instructions, maintenance, troubleshooting, parts list, and warranty information.
Preview Mastercraft Belt/Disc Sander Operating Manual
This operating manual provides safety guidelines, assembly instructions, operating procedures, maintenance tips, and troubleshooting advice for the Mastercraft Belt/Disc Sander, model no. 055-3559-4.
Preview Mastercraft 055-5530-8 Drill Press Instruction Manual
Comprehensive instruction manual for the Mastercraft 055-5530-8 Drill Press, covering safety guidelines, specifications, assembly, operation, maintenance, troubleshooting, and warranty information.