1. Introduction
Thank you for choosing the BN-LINK 7 Day Heavy Duty Digital Programmable Timer. This versatile and user-friendly device is designed to automate your indoor electrical appliances, helping you save energy and enhance home security. With its dual grounded outlets and advanced programming options, you can easily control lights, fans, coffee machines, and more.
Please read this manual thoroughly before operating the timer to ensure safe and efficient use.
2. Important Safety Instructions
- For indoor use only. Do not expose to water or moisture.
- Do not exceed the electrical ratings: 120V, 60Hz, 15A/1725W.
- Always ensure the timer is securely plugged into a grounded outlet.
- Never plug the timer into an extension strip or surge protector if you are using it for high-wattage appliances like heaters.
- Do not use with extension cords that are not rated for the connected appliance.
- Unplug the timer from the outlet before cleaning. Clean only with a dry cloth.
- Keep out of reach of children.
3. Product Overview
The BN-LINK Digital Programmable Timer features a clear LCD display and intuitive buttons for easy programming. It includes two grounded outlets for simultaneous control of connected devices.


Components:
- LCD Display: Shows current time, day, and program settings.
- Control Buttons: WEEK, HOUR, MIN, CLOCK, PROG, ON/AUTO/OFF, R (Reset).
- Dual Grounded Outlets: Two 3-prong outlets for connecting devices.
- Indicator Light: Red LED indicates power status.
4. Setup
4.1 Initial Charging and Reset
Before first use, or if the screen is blank, plug the timer into any standard 120V outlet for at least 30 minutes to charge the internal battery. This battery backup retains your settings during power outages.
After charging, press the 'R' (Reset) button with the tip of a small non-metallic insulated tool (like a pencil or toothpick) to clear all previous settings and ensure proper operation.
4.2 Setting Current Day and Time
- Press and hold the CLOCK button.
- While holding CLOCK, press WEEK to set the current day of the week.
- While holding CLOCK, press HOUR to set the current hour (AM/PM).
- While holding CLOCK, press MIN to set the current minute.
- Release the CLOCK button to save the settings.
5. Operating the Timer
5.1 Setting Programs (ON/OFF Times)
The timer allows for up to 8 ON/OFF programs. Each program consists of an ON time and an OFF time.
- Press the PROG button once. The display will show "1 ON".
- Press WEEK repeatedly to select the desired day(s) for this program (e.g., daily, weekdays, weekends, specific days).
- Press HOUR and MIN to set the ON time for program 1.
- Press PROG again. The display will show "1 OFF".
- Repeat steps 2 and 3 to set the OFF time for program 1.
- Continue pressing PROG to cycle through "2 ON", "2 OFF" up to "8 ON", "8 OFF" and set additional programs as needed.
- After setting all desired programs, press the CLOCK button to return to the current time display.

5.2 ON/AUTO/OFF Modes
The ON/AUTO/OFF button cycles through three operating modes:
- ON: The timer's outlets are continuously ON, overriding any programs.
- OFF: The timer's outlets are continuously OFF, overriding any programs.
- AUTO: The timer operates according to the programmed ON/OFF times. Ensure the timer is in AUTO mode for your programs to run.
5.3 Vacation Mode (Random Function)
The "Random" function helps enhance home security by varying your programmed ON/OFF times, making it appear as if someone is home even when you're away.
- Ensure the timer is in AUTO mode.
- Press the R button. A small "R" icon will appear on the display, indicating Random mode is active.
- In Random mode, your programmed ON/OFF times will be randomly delayed by 2 to 32 minutes.
- To deactivate Random mode, press the R button again. The "R" icon will disappear.

5.4 Daylight Saving Time (DST) Adjustment
To adjust for Daylight Saving Time:
- Press the HOUR and MIN buttons simultaneously.
- The time will advance or go back by one hour, and a small "DST" icon will appear or disappear on the display.

6. Maintenance
- Keep the timer clean by wiping it with a dry, soft cloth.
- Do not use abrasive cleaners or solvents.
- Store the timer in a cool, dry place when not in use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Internal battery is low or depleted. | Plug the timer into a live outlet for at least 30 minutes to charge the battery. |
| Programs are not running. | Timer is not in AUTO mode. | Press the ON/AUTO/OFF button until "AUTO" appears on the display. |
| Incorrect time or day displayed. | Time/day was not set correctly or reset. | Follow instructions in Section 4.2 to reset and set the current time and day. |
| Timer is not turning ON/OFF at programmed times. | Programs are incorrect or conflicting. | Review and re-enter your programs as per Section 5.1. Ensure no overlapping times. |
8. Specifications
- Model Number: FD-60/U6
- Operation Mode: ON-OFF
- Current Rating: 15 Amps
- Operating Voltage: 120V AC
- Frequency: 60Hz
- Wattage: 1725W Max
- Contact Type: Normally Closed
- Connector Type: Plug In (3-Prong)
- Item Dimensions (L x W x H): 3 x 3.1 x 3.2 inches
- Item Weight: 8 ounces
- Number of Programs: 8 ON/OFF times per day
- Color: White
- Certifications: ETL Listed
9. Warranty and Support
BN-LINK products are designed and manufactured to the highest quality standards. For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official BN-LINK website.
For a detailed user guide and additional resources, you can also refer to the official PDF manual: User Manual (PDF).