1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your EZ-FIT FIREPLACE DOORS Temco Prefab Fireplace Door. This door is specifically designed for 39-inch Temco fireplace models: TFC39, TFC39-2, TFC39-3, TFC3922, TLC39-2, TLC39-3, TLC39-2I, TLC39-3I, TLC3922. It features a durable matte black anodized-aluminum frame, tempered clear glass, and tracked bi-fold doors for enhanced safety and efficiency.
Please read all instructions carefully before proceeding with installation or use.
Figure 1: EZ-FIT FIREPLACE DOORS Temco Prefab Fireplace Door (Closed)
2. Safety Information
IMPORTANT SAFETY NOTICE: Fireplace doors must be fully opened while the fire is burning to ensure proper ventilation and prevent heat buildup, which could damage the unit or cause injury.
Always ensure the mesh panels are closed when a fire is active to contain embers and sparks.
3. Product Overview
The EZ-FIT Fireplace Door is constructed with a sleek 1 1/8" matte black anodized-aluminum frame and features tempered 3/16" clear safety glass. The design incorporates smooth-operating tracked bi-fold doors that open a full 90 degrees, along with magnetic mesh panels for spark protection.
Figure 2: Sleek Matte Black Finish
Figure 3: Key Product Features
4. Compatibility and Sizing
This fireplace door is designed exclusively for specific Temco prefab/zero-clearance fireplace models. It is crucial to verify your fireplace's make and model number before purchase. The metal tag displaying this information is typically located inside the firebox.
Compatible Temco Models: TFC39, TFC39-2, TFC39-3, TFC3922, TLC39-2, TLC39-3, TLC39-2I, TLC39-3I, TLC3922.
This door is an inside fit only and will not fit any other fireplace models or sizes. The listed dimensions (e.g., 39" x 22") refer to the fireplace opening size. The actual product dimensions may be slightly smaller (up to 1/4") to allow for installation adjustments and optimal functionality, including reducing heat loss. These minor size variations are intentional and not defects.
Figure 4: Important Ordering Information
Figure 5: Model-Specific Design
5. Installation
Installation of the EZ-FIT Fireplace Door is designed to be straightforward, requiring only a screwdriver and a drill. Ensure you have these basic tools before beginning.
5.1 Pre-Installation Checklist
- Verify the correct make and model number of your fireplace.
- Remove any existing tracks or obstructions from the fireplace opening.
- Check for any fascia material that might interfere with mounting the door.
- Confirm the presence and functionality of a damper handle, if applicable.
Figure 6: Important Buying Tips for Installation
5.2 Installation Steps
While specific steps may vary slightly, the general process involves securing the frame into the fireplace opening and then attaching the bi-fold glass doors and mesh panels. The design allows for recessing back into the fireplace metal opening for an inside fit.
Video 1: Installation Guide. This video demonstrates the process of installing the EZ-FIT Fireplace Door.
6. Operation
The fireplace door features two main components: the outer bi-fold glass doors and the inner mesh panels. Both are designed for ease of use and safety.
6.1 Opening and Closing Glass Doors
The bi-fold glass doors open smoothly to a full 90 degrees. They are secured with magnetic closures when shut, providing a tight seal.
6.2 Operating Mesh Panels
Behind the glass doors are sturdy mesh panels, also secured by magnets. These panels can be opened independently of the glass doors, allowing for spark protection even when the glass doors are open.
Figure 7: Fireplace in Use with Doors Open
Video 2: Product Overview and Operation. This video demonstrates the opening and closing of both the glass doors and mesh panels.
7. Maintenance
To maintain the appearance and functionality of your fireplace door, regular cleaning is recommended.
- Glass Cleaning: Use a non-abrasive glass cleaner and a soft cloth to clean the tempered glass. Avoid harsh chemicals that could damage the frame finish.
- Frame Cleaning: Wipe the matte black anodized-aluminum frame with a damp, soft cloth. Do not use abrasive cleaners or scouring pads.
- Mesh Panel Cleaning: Periodically brush or vacuum the mesh panels to remove ash and debris.
8. Troubleshooting
If you encounter any issues with your fireplace door, please refer to the following common solutions or contact customer support.
8.1 Door Not Closing Properly
- Check for any debris or obstructions in the door tracks.
- Ensure the magnetic closures are clean and free of ash.
- Verify that the frame is installed squarely within the fireplace opening.
8.2 Gaps Around the Door
Minor gaps (up to 1/4") are intentionally designed to accommodate installation adjustments and ensure optimal functionality. If gaps appear excessive, re-check the installation for proper alignment.
9. Specifications
| Feature | Specification |
|---|---|
| Brand | EZ-FIT FIREPLACE DOORS |
| Material | Aluminum |
| Color | Black |
| Product Dimensions (for 39" models) | 39"L x 21.88"W (Fireplace Opening Size) |
| Finish Type | Powder Coated |
| Glass Type | Tempered 3/16" Clear Safety Glass |
| Door Type | Tracked Bi-fold |
| Manufacturer | EZ Door |
| UPC | 630158737291 |
10. Warranty and Support
The EZ Fireplace Door includes a 2-year warranty against defects in materials, workmanship, and glass. This product is proudly made in the USA.
For any questions, measurement assistance, or warranty claims, please contact EZ-FIT FIREPLACE DOORS customer support. You can also visit the official EZ-FIT FIREPLACE DOORS Store for more information.
