Introduction
Thank you for choosing the Genuine Mercedes-Benz License Plate Frame. This premium accessory is crafted from stainless steel with a carbon fiber inlay, designed to complement your Mercedes-Benz vehicle. This manual provides essential information for the proper installation, care, and maintenance of your new license plate frame to ensure its longevity and aesthetic appeal.
Safety Information
Always exercise caution when working with tools and vehicle components. Ensure the vehicle is parked on a level surface with the parking brake engaged. Keep small parts away from children. If you are unsure about any step, it is recommended to seek professional assistance.
Package Contents
- 1 x Genuine Mercedes-Benz License Plate Frame (Stainless Steel with Carbon Fiber Inlay)
- Mounting Screws (quantity may vary based on vehicle model)
- Screw Caps (quantity may vary based on vehicle model)
Setup and Installation
Follow these steps to properly install your license plate frame:
- Prepare the Area: Ensure the area around your vehicle's license plate mounting location is clean and free of debris.
- Remove Existing Frame (if applicable): If an old license plate frame is present, carefully remove it and any associated hardware.
- Position the License Plate: Place your vehicle's license plate onto the mounting area.
- Position the Frame: Align the Mercedes-Benz license plate frame over your license plate, ensuring the screw holes on the frame, license plate, and vehicle align.
- Secure with Screws: Insert the provided mounting screws through the frame and license plate into the vehicle's mounting points. Tighten securely, but do not overtighten to avoid damaging the frame or vehicle.
- Attach Screw Caps: Place the decorative screw caps over the tightened screws. These caps are designed to provide a clean, finished look and protect the screw heads. While generally secure, periodically check that these caps remain firmly attached.
Figure 1: The Mercedes-Benz License Plate Frame, ready for installation. Note the polished stainless steel and the distinctive carbon fiber inlay with the Mercedes-Benz logo.
Operating
The Mercedes-Benz License Plate Frame is a static accessory and does not require active operation. Once properly installed, it functions as a decorative and protective border for your license plate.
Maintenance and Care
To maintain the pristine appearance of your license plate frame:
- Cleaning: Clean the frame regularly with a soft cloth and mild automotive soap or a non-abrasive cleaner. Rinse thoroughly with water and dry with a clean, soft towel to prevent water spots.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and the carbon fiber inlay.
- Rust Resistance: The frame is made from stainless steel, which is highly resistant to rust. However, regular cleaning helps prevent the buildup of corrosive substances that could potentially affect its appearance over time.
- Check Fasteners: Periodically check the tightness of the mounting screws and the security of the screw caps to ensure the frame remains firmly attached to your vehicle.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Frame is loose or rattling. | Mounting screws are not tight enough. | Carefully tighten the mounting screws. Do not overtighten. |
| Screw caps fall off. | Caps may not have been fully seated or have loosened over time due to vibration. | Ensure caps are firmly pressed onto the screw heads. If lost, contact an authorized Mercedes-Benz dealership for replacements. |
| Surface appears dull or stained. | Buildup of dirt, road grime, or exposure to harsh elements. | Clean the frame thoroughly using recommended cleaning methods (see Maintenance and Care). |
Specifications
- Brand: Mercedes Benz
- Model Number: BQ 6 88 0122
- Material: Stainless Steel with Carbon Fiber Inlay
- Product Dimensions: 12.99"L x 6.3"W
- Item Weight: 2.5 Pounds
- Finish Type: Powder Coated
Figure 2: Detailed dimensions of the license plate frame.
Warranty and Support
This product is a Genuine Mercedes-Benz Part, sold from an Authorized Mercedes-Benz Dealership. For specific warranty information, please refer to the documentation provided at the time of purchase or contact the authorized dealership where the product was acquired.
To verify fitment for your vehicle or for any support inquiries, it is recommended to contact the seller or an authorized Mercedes-Benz service center with your complete Vehicle Identification Number (VIN).
For additional support or to find an authorized dealership, please visit the official Mercedes-Benz website or refer to your vehicle's owner's manual.
