1. Product Overview
The Connects2 CTSSA002.2 is a specialized car accessory designed to facilitate the integration of aftermarket car audio systems with the existing steering wheel controls of specific SAAB vehicle models. This interface ensures that the original steering wheel buttons, such as volume control, track skip, and mode selection, remain functional after upgrading your car's head unit.
Key Features:
- Enables steering wheel control functionality with aftermarket head units.
- Designed for SAAB 43533 (1998 - 2002) and SAAB 43594 (1998 - 2002) models.
- Excludes vehicles with automatic transmission.
- Official Connects2 brand product, known for interface solutions.
Image: The Connects2 CTSSA002.2 Car Accessory. This image displays the main electronic module, which is black and rectangular with the 'Connects2' logo, along with various multi-colored wiring harnesses and connectors. These components are essential for connecting the accessory to the vehicle's electrical system and the aftermarket head unit.
2. Setup and Installation
Installation of the CTSSA002.2 requires basic knowledge of car audio wiring and vehicle electronics. It is recommended that installation be performed by a qualified professional.
- Preparation: Ensure the vehicle's ignition is off and disconnect the negative terminal of the car battery to prevent electrical shorts.
- Access Vehicle Wiring: Carefully remove the existing car stereo or access the vehicle's wiring harness behind the dashboard. Refer to your vehicle's service manual for specific instructions on accessing these components.
- Identify Connections: Identify the vehicle's factory wiring harness for the steering wheel controls and power.
- Connect the Interface: Connect the CTSSA002.2 accessory's wiring harnesses to the corresponding vehicle wiring and the aftermarket head unit. Ensure all connections are secure and correctly matched according to the wiring diagram provided with your specific head unit and the Connects2 accessory (if a separate diagram is included).
- Secure Components: Once all connections are made, secure the CTSSA002.2 module and excess wiring to prevent rattling or interference.
- Test Functionality: Reconnect the car battery. Turn on the ignition and the aftermarket head unit. Test all steering wheel control functions (volume up/down, track skip, mode, etc.) to ensure they operate correctly.
- Reassemble: Carefully reassemble the dashboard components.
Important: This accessory is compatible with SAAB 43533 (1998 - 2002) and 43594 (1998 - 2002) models. It is not compatible with vehicles equipped with automatic transmission.
3. Operating Instructions
Once the CTSSA002.2 Car Accessory is correctly installed, its operation is seamless and integrated with your vehicle's existing steering wheel controls. The accessory acts as a bridge, translating the signals from your factory steering wheel buttons into commands that your aftermarket head unit can understand.
To operate:
- Ensure your aftermarket head unit is powered on.
- Use the steering wheel buttons as you normally would for functions such as:
- Volume Up/Down
- Track Next/Previous
- Mode/Source Selection
- Mute (if applicable)
- The response of the head unit to these commands should be immediate and accurate.
No direct interaction with the CTSSA002.2 module itself is required during normal operation.
4. Maintenance
The Connects2 CTSSA002.2 Car Accessory is designed for long-term, maintenance-free operation. As an electronic interface, it requires minimal upkeep.
- Keep Dry: Ensure the module remains dry and is not exposed to moisture or extreme temperatures.
- Secure Connections: Periodically, if accessible, check that all wiring connections remain secure and free from corrosion. Loose connections can lead to intermittent functionality.
- Cleaning: If the module becomes dusty, gently wipe it with a dry, soft cloth. Do not use liquid cleaners or solvents.
No user-serviceable parts are inside the unit. Do not attempt to open or repair the accessory.
5. Troubleshooting
If you encounter issues with your CTSSA002.2 Car Accessory, please refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Steering wheel controls not working. | Incorrect wiring connections. Incompatible head unit or vehicle. Head unit not configured for steering wheel controls. | Double-check all wiring connections against the installation guide. Verify your vehicle and head unit compatibility. Consult your head unit's manual for steering wheel control setup. |
| Intermittent control response. | Loose connections. Electrical interference. | Ensure all connections are firmly seated. Check for any exposed wires or poor insulation. |
| Only some controls work. | Incorrect programming/mapping. Head unit limitation. | Some aftermarket head units require programming of steering wheel buttons. Refer to your head unit's manual. Not all steering wheel buttons may be supported by every aftermarket head unit. |
| No power to the accessory. | Blown fuse. Incorrect power connection. | Check the vehicle's fuse box and any inline fuses for the head unit/accessory. Verify the power and ground connections are correct and secure. |
If the problem persists after following these steps, please contact Connects2 customer support or a qualified installer.
6. Specifications
| Attribute | Detail |
|---|---|
| Brand | Connects2 |
| Model | CTSSA002.2 |
| Item Weight | 4.2 ounces |
| Product Dimensions | 11.81 x 9.84 x 1.97 inches |
| Manufacturer Part Number | CTSSA002.2 |
| ASIN | B00MQRFRN0 |
| Compatibility | SAAB 43533 (1998 - 2002), SAAB 43594 (1998 - 2002) - Excluding vehicles with automatic transmission |
| Included Components | Car accessory (interface module and wiring) |
| Date First Available | August 15, 2014 |
7. Warranty Information
The Connects2 CTSSA002.2 Car Accessory comes with a 2-year warranty on any new Connects2 component. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For specific warranty terms and conditions, or to initiate a warranty claim, please refer to the official Connects2 website or contact their customer support.
8. Support and Contact
For further assistance, technical support, or inquiries regarding the CTSSA002.2 Car Accessory, please contact Connects2 through their official channels:
- Official Website: Visit the Connects2 website for product information, FAQs, and support resources.
- Global Network: Connects2 operates through a global network of retailers and distributors. You may contact your local retailer or distributor for immediate support.
- Customer Service: Refer to the Connects2 website for direct customer service contact information, including phone numbers or email addresses.
When contacting support, please have your product model (CTSSA002.2) and vehicle details readily available.
