Introduction
This manual provides essential information for the proper installation and use of your Rocketfish RF-HG12501 12-Foot 4K UltraHD/HDR In-Wall Rated HDMI Cable. This cable is designed to deliver high-quality audio and video signals between compatible devices, supporting advanced features such as 4K resolution, High Dynamic Range (HDR), and immersive audio formats like Dolby Atmos.
Product Overview
Key Features
- In-Wall Rated: Certified for safe in-wall installations, providing a clean and organized setup.
- Advanced Visuals: Supports 4K UltraHD resolution, HDR, and Dolby Vision for stunning picture quality.
- Superior Shielding: Features triple-layer protection and a 360° metal connector shell to guard against electromagnetic interference (EMI) and radio frequency interference (RFI).
- Enhanced Audio: Compatible with advanced audio formats, including Dolby Atmos, for an immersive sound experience.
- 24K Gold-Plated Contacts: Resists corrosion and ensures optimal signal transfer for consistent performance.
- Universal Compatibility: Works with all HDMI standards and HDMI-enabled devices.
- Data Transfer Rate: Supports up to 18 Gigabits Per Second (Gbps).
What's in the Box
- Rocketfish RF-HG12501 12-Foot 4K UltraHD/HDR In-Wall Rated HDMI Cable
Product Visuals






Official Product Video
This video provides an overview of the Rocketfish 4K UltraHD/HDR In-Wall Rated HDMI Cable, detailing its features and benefits for home theater setups.
Setup
- Identify Ports: Locate the HDMI output port on your source device (e.g., Blu-ray player, gaming console, streaming box) and the HDMI input port on your display device (e.g., TV, projector). Ensure both devices are powered off before connecting.
- Connect Source: Insert one end of the Rocketfish HDMI cable firmly into the HDMI output port of your source device.
- Connect Display: Insert the other end of the Rocketfish HDMI cable firmly into an available HDMI input port on your display device. Note the HDMI input number (e.g., HDMI 1, HDMI 2) for later selection.
- In-Wall Installation (Optional): If performing an in-wall installation, ensure compliance with local building codes and use appropriate conduit or cable management solutions. The cable's in-wall rating allows for this type of installation.
- Power On: Power on your display device, then your source device.
- Select Input: Use your display device's remote control to select the corresponding HDMI input where the cable is connected.
A successful connection will display the source device's output on your screen.
Operating
Once the Rocketfish HDMI cable is connected and the correct input is selected on your display, operation is automatic. The cable transmits both audio and video signals digitally. No additional configuration is typically required for the cable itself.
- Video: The cable will automatically transmit the highest supported video resolution and features (up to 4K UltraHD, HDR, Dolby Vision) that are compatible with both your source and display devices.
- Audio: Audio signals, including advanced formats like Dolby Atmos, will be transmitted to your display or connected audio receiver. Ensure your audio system is properly configured to receive and decode these formats.
Maintenance
The Rocketfish HDMI cable requires minimal maintenance to ensure long-lasting performance.
- Cleaning: Gently wipe the cable and connectors with a soft, dry cloth to remove dust. Avoid using liquid cleaners directly on the connectors.
- Storage: When not in use, store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid sharp bends or kinks in the cable.
- Handling: Always grasp the connector housing when plugging or unplugging the cable. Avoid pulling on the cable itself, as this can damage the internal wiring or connectors.
- Inspection: Periodically inspect the cable and connectors for any signs of damage, such as frayed insulation or bent pins. If damage is observed, replace the cable.
Troubleshooting
If you encounter issues with your HDMI connection, try the following troubleshooting steps:
| Problem | Possible Solution |
|---|---|
| No picture or sound |
|
| Poor picture quality (e.g., flickering, distorted colors) |
|
| No audio or distorted audio |
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Rocketfish |
| Model Name | RF-HG12501 |
| Connector Type | HDMI |
| Cable Type | HDMI |
| Compatible Devices | HDMI Devices |
| Special Feature | 24K gold-plated connectors, In-Wall Rated |
| Connector Gender | Male-to-Male |
| Data Transfer Rate | 18 Gigabits Per Second |
| Number of Pins | 19 |
| Frequency | 18 GHz |
| Recommended Uses | General Purpose HDMI Cable |
| Specification Met | UL |
| Indoor/Outdoor Usage | Indoor |
| Color | Black |
| Item Length | 12 Feet |
| Outer Material | Polyvinyl Chloride (PVC) |
| UPC | 600603163999 |
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Rocketfish website. Keep your proof of purchase for any warranty claims.
If you require further assistance, please contact Rocketfish customer service through their official channels.





