Introduction
The Treemote Wireless Remote Switch provides a convenient solution for controlling indoor holiday lighting and other hard-to-reach light fixtures. This system allows you to turn your lights on and off from up to 100 feet away, eliminating the need to crawl under or behind your Christmas tree or other furniture.
The package includes a unique Christmas tree-shaped remote control and a compact receiver unit that plugs into any standard wall outlet.
Image: The Treemote Wireless Remote Switch in its original packaging, displaying both the green Christmas tree-shaped remote and the white receiver unit. The packaging highlights its wireless capability and ease of use.
Important Safety Information
Please read and understand all safety instructions before using the Treemote Wireless Remote Switch. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- For indoor use only. Do not expose the device to water or moisture.
- Do not exceed the maximum electrical rating of the receiver unit. Refer to the product specifications for details.
- Ensure the receiver is securely plugged into a grounded outlet.
- Unplug the receiver from the wall outlet before cleaning or when not in use for extended periods.
- Keep the remote control and receiver out of reach of children.
- Do not attempt to disassemble or repair the device. Contact customer support for assistance.
Package Contents
Verify that all items are present in your package:
- 1 x Treemote Christmas Tree-Shaped Remote Control
- 1 x Treemote Receiver Unit
- 1 x CR2032 Battery (pre-installed in remote, with protective cover)
Setup Instructions
1. Battery Activation
The CR2032 battery is pre-installed in the remote control. Before first use, you must remove the clear plastic protective cover from the battery compartment to activate the battery.
- Locate the battery compartment on the back of the Treemote remote control.
- Gently pull out the small, clear plastic tab protruding from the battery compartment. This tab prevents battery drain during shipping.
- Ensure the battery is seated correctly after removing the tab.
2. Receiver Connection
- Plug the Treemote receiver unit into a standard indoor wall outlet.
- Plug your Christmas lights, or any other compatible electrical device, into the receptacle on the front of the Treemote receiver unit.
- Ensure both the receiver and your device are securely plugged in.
Image: A user's hand holding the Treemote remote control, demonstrating its compact size and how it can be easily held while operating lights near a decorated Christmas tree.
Operating Instructions
Using the Treemote Wireless Remote Switch is simple:
- To turn on the connected lights: Press the red button on the Treemote remote control once. The lights will illuminate.
- To turn off the connected lights: Press the red button on the Treemote remote control again. The lights will turn off.
The Treemote operates wirelessly and can control your lights from up to 100 feet away, allowing you to manage your lighting from across the room or even from another area of your home.
Recommended Use Cases:
- Christmas Trees: Easily turn your Christmas tree lights on and off without bending or reaching for the plug.
- Holiday Decorations: Control lights on stairways, fireplaces, wreaths, and other festive displays.
- Hard-to-Reach Fixtures: Use year-round for lamps or other devices plugged into inconveniently located outlets.
Image: A user's hand holding the Treemote remote, with a large, illuminated Christmas tree visible in the background, emphasizing the product's effective operating range of up to 100 feet.
Maintenance
Battery Replacement:
The Treemote remote control uses one CR2032 coin cell battery. If the remote's range decreases significantly or it stops responding, the battery may need replacement.
- Locate the battery compartment on the back of the remote.
- Use a small screwdriver or coin to open the compartment.
- Remove the old CR2032 battery and insert a new one, ensuring the positive (+) side faces upwards.
- Close the battery compartment securely.
Cleaning:
Wipe the remote and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
Troubleshooting
If you experience issues with your Treemote Wireless Remote Switch, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on/off. | Battery protective tab not removed or battery is dead. Receiver not plugged in. Lights not plugged into receiver. Out of range. | Remove plastic tab from battery. Replace battery if needed. Ensure receiver is firmly plugged into a live wall outlet. Ensure lights are firmly plugged into the receiver. Move closer to the receiver. |
| Reduced operating range. | Low battery in remote. Obstacles between remote and receiver. | Replace the CR2032 battery in the remote. Ensure a clear line of sight or fewer obstructions between the remote and receiver. |
| Receiver not responding. | Power outage or tripped breaker. Receiver malfunction. | Check your home's power supply. Try plugging the receiver into a different outlet. If the issue persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | TREEMOTE |
| Model Number | TR-020 |
| Product Dimensions | 2.25 x 6 x 8 inches (Remote and Receiver combined, approximate) |
| Item Weight | 5.93 ounces |
| Color | Green (Remote) |
| Max Operating Range | Up to 100 feet (30 meters) |
| Remote Battery Type | 1 x CR2032 (Included) |
| Max Number of Supported Devices | 1 (one device plugged into the receiver) |
| Compatible Devices (as per data) | Fan (and other indoor lighting/appliances within electrical rating) |
Warranty and Support
For warranty information or technical support regarding your Treemote Wireless Remote Switch, please contact TREEMOTE customer service. Details on warranty coverage and how to obtain support are typically provided with your purchase documentation or can be found on the official TREEMOTE website.
Please have your model number (TR-020) and purchase details ready when contacting support.
