Introduction
This manual provides essential information for the proper installation, function, maintenance, and troubleshooting of the Holman 2P-200736 2-Inch Bearing Spring. Please read these instructions carefully before installation and retain this manual for future reference. Adherence to these guidelines will ensure optimal performance and longevity of the product.
Product Overview
The Holman 2P-200736 is a durable 2-inch bearing spring designed for various industrial and automotive applications. Constructed from metal, this plain bearing spring is engineered to provide support and reduce friction within mechanical assemblies. Its robust design ensures reliable performance in demanding environments.
Image: The Holman 2P-200736 2-Inch Bearing Spring, a metal component designed for mechanical support.
Installation Instructions
Proper installation is crucial for the performance and lifespan of the bearing spring. Always ensure safety precautions are followed, including wearing appropriate personal protective equipment.
- Preparation: Ensure the housing or shaft where the bearing spring will be installed is clean, free from debris, and smooth. Inspect for any burrs or sharp edges that could damage the spring.
- Alignment: Carefully align the bearing spring with the shaft or housing. Avoid forcing the spring, as this can cause deformation or damage.
- Insertion: Gently press or slide the bearing spring into its designated position. For tight fits, specialized tools may be required to ensure even pressure and prevent damage.
- Lubrication: Apply a compatible lubricant, such as grease, to the bearing spring and surrounding components as specified by the equipment manufacturer. Refer to the 'Maintenance and Care' section for more details.
- Verification: After installation, manually rotate or move the assembly to ensure smooth operation and proper seating of the bearing spring. Check for any binding or unusual resistance.
If you are unsure about any step, consult a qualified technician or the equipment's primary service manual.
Function and Application
The Holman 2P-200736 bearing spring functions as a critical component in mechanical systems where rotational or linear motion occurs. As a plain bearing, it provides a low-friction surface for moving parts, supporting radial and axial loads. Its primary role is to:
- Reduce Friction: Minimizes resistance between moving surfaces, improving efficiency.
- Support Loads: Distributes weight and forces, preventing wear on other components.
- Guide Motion: Ensures precise alignment and movement of shafts or other parts.
This bearing spring is commonly found in automotive, motorcycle, and powersports drive train systems, as well as various industrial machinery requiring reliable bearing support.
Maintenance and Care
Regular maintenance extends the life and ensures the optimal performance of your Holman bearing spring.
- Lubrication: The 2P-200736 bearing spring requires lubrication with a compatible grease. Follow the lubrication schedule and type recommended by the equipment manufacturer. Inadequate lubrication is a primary cause of premature bearing failure.
- Inspection: Periodically inspect the bearing spring for signs of wear, corrosion, or damage. Look for discoloration, scoring, or excessive play. Replace the bearing spring if any significant wear or damage is observed.
- Cleaning: Keep the area around the bearing spring clean to prevent contaminants from entering the bearing surface, which can cause abrasive wear.
- Storage: If storing spare bearing springs, keep them in a clean, dry environment, preferably in their original packaging, to protect them from dust and moisture.
Troubleshooting
If you experience issues with your assembly involving the bearing spring, consider the following common problems and solutions:
- Excessive Noise or Vibration:
- Cause: Insufficient lubrication, wear, or improper installation.
- Solution: Check lubrication levels and apply compatible grease. Inspect the bearing spring for wear and replace if necessary. Re-verify installation.
- Overheating:
- Cause: Lack of lubrication, excessive load, or misalignment.
- Solution: Ensure proper lubrication. Reduce load if possible. Check for and correct any misalignment in the assembly.
- Premature Wear:
- Cause: Contamination, improper lubrication, or excessive load.
- Solution: Maintain a clean operating environment. Use correct and sufficient lubricant. Ensure the bearing spring is not subjected to loads beyond its design capacity.
For persistent issues, consult a professional technician or the equipment manufacturer's service manual.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Holman |
| Model Number | 2P-200736 (also 244-1083) |
| Material | Metal |
| Item Thickness | 2 Inches |
| Outside Diameter | 2 Inches |
| Bearing Type | Plain Bearing |
| Compatible Lubricant | Grease |
| Item Weight | 0.01 Pounds (approx. 0.16 ounces) |
| UPC | 232441083124 |
| Manufacturer | HOLMAN |
| Date First Available | August 10, 2014 |
Warranty and Support
For specific warranty information regarding the Holman 2P-200736 2-Inch Bearing Spring, please refer to the original purchase documentation or contact your retailer. Holman products are manufactured to high standards, and any claims should be directed to the point of purchase or the manufacturer's official support channels.
For technical assistance or further inquiries, please visit the official Holman website or contact their customer service department. Always provide the model number (2P-200736 or 244-1083) when seeking support.
