UpBright 12V AC/DC Adapter Instruction Manual

Introduction

This manual provides essential information for the safe and effective use of your UpBright 12V AC/DC Adapter. This power supply is designed to be compatible with AT&T Scientific Atlanta U-Verse Cisco IPN330HD and IPN601G TV Boxes, as well as Delta Electronics EADP-20DB A and EADP-20DBA models. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

To ensure safe operation and prevent damage, observe the following safety precautions:

• Input Voltage: This adapter is designed for a worldwide input voltage range of 100-240VAC, 50/60Hz. Ensure your power outlet matches these specifications.
• Protection Features: The adapter includes Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to safeguard your devices.
• Environment: Do not expose the adapter to moisture, rain, or extreme temperatures. Use in a dry, well-ventilated area.
• Compatibility: Use this adapter only with compatible devices as specified (AT&T Scientific Atlanta U-Verse Cisco IPN330HD, IPN601G TV Boxes, Delta Electronics EADP-20DB A, EADP-20DBA). Using it with incompatible devices may cause damage.
• Handling: Do not disassemble, modify, or attempt to repair the adapter. Refer all servicing to qualified personnel.
• Cable Care: Avoid kinking, stretching, or placing heavy objects on the power cord.

Package Contents

Verify that all items are present in your package:

• UpBright 12V AC/DC Adapter (Quantity: 2, if purchased as a set)

Image: The UpBright 12V AC/DC Adapter, featuring the main power brick with a standard US two-prong plug and an attached output cable terminating in a barrel connector.

Setup

Follow these steps to connect your AC/DC adapter:

1. Identify the Device: Locate the power input port on your compatible device (e.g., AT&T Scientific Atlanta U-Verse Cisco IPN330HD or IPN601G TV Box).
2. Connect Output: Insert the barrel connector of the UpBright adapter's output cable firmly into the power input port of your device.
3. Connect to Power: Plug the AC prongs of the adapter into a standard wall electrical outlet (100-240VAC, 50/60Hz).
4. Verify Connection: Ensure all connections are secure. Your device should now receive power.

Operating Instructions

The UpBright 12V AC/DC Adapter operates automatically once connected to a power source and a compatible device. No manual operation is required for the adapter itself.

• Once properly connected, the adapter will supply the necessary 12V DC power to your device.
• Refer to your device's instruction manual for specific power-on and operation procedures.

Maintenance

To ensure the longevity and optimal performance of your adapter, follow these simple maintenance guidelines:

• Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture.
• Inspection: Periodically inspect the power cord and connectors for any signs of damage, such as fraying, cuts, or bent pins. If damage is found, discontinue use and replace the adapter.

Troubleshooting

If you encounter issues with your adapter, refer to the following common problems and solutions:

Specifications

Image: The UpBright adapter shown alongside various international plug adapters (AU, EU, UK) and a warranty certificate, indicating global compatibility and support.

Warranty and Support

UpBright products are designed for reliability and performance. This adapter comes with the following:

• Refund Policy: 30 Days Refund.
• Exchange Policy: 24 Months Exchange.

For technical support, warranty claims, or further assistance, please contact UpBright customer service. You can find more information and contact details on the official UpBright Store page.