Introduction
The Dremel VersaTip 2000-7 is a versatile, cordless butane-powered tool designed for precision tasks. It functions as a soldering iron, pyrography tool, hot cutter, heat embosser, paint remover, and welding tool. Its compact design and variable temperature control make it suitable for a wide range of detailed applications. This manual provides essential information for safe and effective use of your Dremel VersaTip.
Safety Information
Always prioritize safety when operating the Dremel VersaTip. Failure to follow these guidelines may result in injury or property damage.
- Ventilation: Use the tool in a well-ventilated area to prevent the accumulation of butane fumes.
- Flammable Materials: Keep the VersaTip away from flammable liquids, gases, and materials.
- Hot Surfaces: The tip and surrounding metal parts become extremely hot during operation and remain hot after use. Allow the tool to cool completely before handling or storing. Use the provided cap for temporary placement.
- Butane Handling: Refill with high-quality butane gas only. Do not overfill. Butane is highly flammable; avoid open flames or sparks during refilling.
- Children and Pets: Keep the tool out of reach of children and pets.
- Eye Protection: Always wear appropriate eye protection when operating the tool.
- Accidental Ignition: Utilize the safety lock to prevent unintended ignition.
Included Components
Your Dremel VersaTip 2000-7 package includes the following items:
- (1) Dremel VersaTip Butane Torch
- (1) Soldering Tip
- (1) Cutting Knife
- (1) Hot Knife
- (1) Flat Wide Flame Head
- (1) Hot Blower Head
- (1) Reflector
- (1) Soldering Tin with Blue Cap
- (1) Soldering Sponge + Sponge Box
- (1) Instruction Manual (this document)
Image: The Dremel VersaTip 2000-7 with its full set of accessories, including various tips, a soldering sponge, and wrenches.
Setup
1. Filling with Butane Gas
The Dremel VersaTip does not come pre-filled with butane gas. You will need to purchase high-quality butane separately. Ensure you are in a well-ventilated area, away from any ignition sources.
- Turn the flame control knob to the "OFF" position.
- Invert the VersaTip and firmly press the butane gas canister nozzle into the filling valve located at the base of the tool.
- Hold for approximately 10-15 seconds, or until the gas begins to escape from the filling valve, indicating it is full.
- Wait a few minutes after filling before ignition to allow the gas to stabilize.
2. Attaching Tips and Accessories
The VersaTip features interchangeable tips for various applications. Ensure the tool is cool before changing any accessories.
- Select the desired tip (e.g., soldering tip, hot knife, flat wide flame head).
- Carefully screw the tip onto the metal nozzle of the VersaTip until secure. Do not overtighten.
- For some applications, such as the hot blower head, a reflector may also be attached to direct heat.
Image: Key features of the Dremel VersaTip, including the ignition trigger, flame control, flame lock, and interchangeable tips.
Operating Instructions
1. Ignition and Flame Adjustment
- Ensure a tip is securely attached and the tool is filled with butane.
- Slide the safety lock to the "UNLOCKED" position.
- Press the ignition trigger to ignite the flame. If it does not ignite on the first attempt, release and try again.
- Adjust the flame size and temperature using the flame control knob. Turn clockwise for a larger flame/higher temperature, and counter-clockwise for a smaller flame/lower temperature.
- For continuous operation, engage the flame lock by sliding it forward after ignition. To disengage, slide it back.
2. Applications
The Dremel VersaTip is designed for six primary applications:
- Soldering: Attach the soldering tip. Use for electrical connections, jewelry repair, and other precision soldering tasks. The included soldering tin and sponge can be used for tip cleaning.
Image: The Dremel VersaTip ready for use with various tips, including soldering tips, on a wooden surface.
- Pyrography (Wood Burning): Attach the pyrography tip. Use for decorative designs on wood, leather, and other suitable materials.
Image: Demonstrating pyrography with the Dremel VersaTip on a wooden piece.
- Hot Cutting: Attach the hot knife or cutting knife. Ideal for cutting and sealing synthetic ropes, fabrics, and plastics.
- Heat Embossing: Attach the hot blower head. Use for melting embossing powders on paper crafts or other heat-sensitive materials.
Image: Using the Dremel VersaTip for heat embossing, specifically applying rhinestones to fabric.
- Paint Removal: Attach the flat wide flame head. Use for localized paint removal on small areas.
- Welding: With appropriate accessories and technique, the VersaTip can be used for small-scale plastic welding.
Always test on a scrap piece of material before working on your final project to determine the optimal temperature and technique.
Maintenance
1. Cleaning
- Tips: For soldering tips, use the included damp sponge to wipe off excess solder and oxidation while the tip is warm. For other tips, allow them to cool completely, then gently wipe with a soft cloth. Avoid abrasive cleaners.
- Tool Body: Wipe the body of the VersaTip with a clean, dry cloth. Do not immerse in liquids.
2. Storage
Store the Dremel VersaTip and its accessories in the provided storage box in a cool, dry place, away from direct sunlight and heat sources. Ensure the tool is completely cool and empty of butane before storing for extended periods.
Image: The Dremel VersaTip and its accessories stored in the compact and organized kit box.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not ignite. | Low or no butane gas. Safety lock engaged. Ignition mechanism fault. | Refill with butane. Disengage safety lock. Contact Dremel support if ignition continues to fail after refilling and unlocking. |
| Inconsistent or weak flame. | Low butane gas. Clogged nozzle/tip. Air bubbles in butane tank. | Refill butane. Clean the tip and nozzle. Purge air by briefly pressing the filling valve with a small tool (ensure no flame/ignition source nearby). |
| Tip not heating sufficiently. | Flame control set too low. Incorrect tip for application. | Increase flame control setting. Ensure the correct tip is used for the task (e.g., soldering tip for soldering). |
Specifications
| Feature | Detail |
|---|---|
| Brand | Dremel |
| Model Number | 2000-7 |
| Power Source | Butane Gas (not included) |
| Burner Type | Butane |
| Special Features | Lightweight, Portable, Cordless, Variable Temperature Control, Flame Lock, Integrated Ignition, Safety Lock |
| Item Weight | 0.35 Kilograms (12.3 ounces) |
| Package Dimensions | 12.99 x 4.17 x 1.93 inches |
| Material | Metal |
| Included Components | Dremel VersaTip Butane Torch, Soldering Tip, Cutting Knife, Hot Knife, Flat Wide Flame Head, Hot Blower Head, Reflector, Soldering Tin with Blue Cap, Soldering Sponge + Sponge Box, Instruction Manual |
Warranty and Support
For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Dremel website. For technical support, replacement parts, or further assistance, please contact Dremel customer service.
You can find more information and contact details on the official Dremel store: Dremel Official Store.
Official Product Videos
No official product videos from the seller were found in the provided data for embedding in this manual.
