1. Introduction
This manual provides essential information for the proper use, installation, and maintenance of your uxcell Steel Wheel Axle Shafts. These shafts are designed for various mechanical applications, including RC airplanes, and are manufactured from durable steel for reliable performance. Please read this manual thoroughly before installation and use to ensure optimal functionality and safety.
2. Product Overview
The uxcell Steel Wheel Axle Shafts are precision-engineered components used to connect wheels or other rotating parts to a motor or chassis. They are characterized by their silver-tone finish and robust steel construction, ensuring longevity and resistance to wear in demanding applications.
Figure 2.1: Two uxcell Steel Wheel Axle Shafts. This image displays two silver-tone steel wheel axle shafts. One shaft measures 57mm in length, 4mm in diameter, with a 5mm thread diameter. The other measures 37mm in length, 4mm in diameter, with a 4mm thread diameter. These shafts are designed for various mechanical applications, including RC airplanes.
Key Features:
- Material: High-quality steel for durability and strength.
- Color: Silver Tone finish.
- Application: Suitable for RC airplanes and various other mechanical systems requiring reliable axle connections.
- Package Content: Each package contains 2 pieces of steel wheel axle shafts.
3. Specifications
Detailed technical specifications for the uxcell Steel Wheel Axle Shafts are provided below:
| Attribute | Value |
|---|---|
| Product Name | Steel Wheel Axle Shaft |
| Material | Steel |
| Color | Silver Tone |
| Overall Size (57mm variant) | 57mm (L) x 4mm (D) x 5mm (Thread Dia.) |
| Overall Size (37mm variant) | 37mm (L) x 4mm (D) x 4mm (Thread Dia.) |
| Item Diameter | 4 Millimeters |
| Wheel Size (for 57mm variant) | 57 Millimeters |
| Rim Width | 4 Millimeters |
| Item Weight | Approximately 13g (for 2 pieces) / 0.03 Pounds |
| Vehicle Service Type | Airplane (RC) |
| Manufacturer Part Number | a14032900ux0505 |
| UPC | 702105147894 |
| Package Quantity | 2 Pieces |
4. Setup & Installation
The uxcell Steel Wheel Axle Shafts are designed for straightforward integration into compatible mechanical systems. Proper installation ensures secure attachment and optimal performance.
Installation Steps:
- Identify Mounting Point: Locate the designated mounting point on your device (e.g., RC airplane landing gear, motor shaft, or chassis) where the axle shaft will be installed.
- Prepare Components: Ensure that the wheel, bearings (if applicable), and any securing hardware (e.g., nuts, washers, set screws) are clean and free from debris.
- Insert Axle: Carefully insert the axle shaft through the wheel hub and any associated bearings or bushings.
- Secure Axle: Depending on your application, secure the axle shaft using appropriate fasteners. For threaded ends, use a compatible nut and washer, tightening until snug but not overtightened to avoid stripping threads or binding the wheel. For smooth shafts, use set screws or retaining clips as required by your design.
- Check for Free Rotation: After securing, manually rotate the wheel to ensure it spins freely without excessive wobble or binding. Adjust tightness if necessary.
- Verify Stability: Confirm that the axle shaft is firmly seated and does not exhibit any play that could lead to detachment during operation.
Note: Always refer to the specific assembly instructions of the device or model you are integrating these axle shafts into for detailed guidance on compatible parts and torque specifications.
5. Maintenance
Regular inspection and minimal maintenance will help prolong the life and ensure the reliable performance of your uxcell Steel Wheel Axle Shafts.
Maintenance Guidelines:
- Regular Inspection: Periodically inspect the axle shafts for signs of wear, bending, corrosion, or damage. Pay close attention to the threaded areas and points of contact with other components.
- Cleaning: Keep the shafts clean from dirt, dust, and debris, especially if used in outdoor or dusty environments. A soft cloth can be used for cleaning.
- Lubrication (if applicable): If the axle operates with bearings or bushings that require lubrication, apply a suitable lubricant as recommended by the manufacturer of the associated components. The axle shaft itself typically does not require lubrication.
- Fastener Check: Ensure all securing fasteners (nuts, set screws) remain tight. Vibrations during operation can sometimes loosen these components.
- Storage: Store unused or spare axle shafts in a dry environment to prevent rust or corrosion.
Caution: Replace any axle shaft that shows significant signs of damage or wear to prevent potential failure during operation.
6. Troubleshooting
This section addresses common issues that may arise during the use of uxcell Steel Wheel Axle Shafts.
| Problem | Possible Cause | Solution |
|---|---|---|
| Wheel does not spin freely or binds. |
|
|
| Excessive wobble in wheel. |
|
|
| Axle shaft detaches during use. |
|
|
7. Warranty Information
uxcell products are manufactured to high-quality standards. While specific warranty details may vary, uxcell generally offers a return policy for products that are defective upon arrival or do not meet stated specifications. For detailed warranty terms and conditions, please refer to the purchase platform or contact uxcell customer support directly. Keep your proof of purchase for any warranty claims.
8. Customer Support
If you encounter any issues or have questions regarding your uxcell Steel Wheel Axle Shafts that are not covered in this manual, please contact uxcell customer support. You can typically find contact information on the uxcell official website or through the retailer where the product was purchased.
For more information, visit the official uxcell Store on Amazon.
