Beyution NS-RC9DNA-14

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Beyution NS-RC9DNA-14 Replacement Remote Control User Manual

For Insignia TV Models

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Beyution NS-RC9DNA-14 replacement remote control. This remote is designed to function as a direct replacement for original Insignia TV remotes, offering immediate usability without complex programming.

Setup

1. Battery Installation

The remote control requires two AAA batteries (not included) for operation. Follow these steps to install them:

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards or press the latch and lift to open.
  3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Replace the battery compartment cover by sliding it back into place until it clicks securely.
Back view of Beyution NS-RC9DNA-14 remote control with open battery compartment.
This image shows the back of the remote control with the battery compartment cover removed, illustrating where to insert two AAA batteries.

2. Initial Use

This replacement remote control is designed for immediate use with compatible Insignia TV models. No programming or setup is required. Once batteries are installed, point the remote towards your TV and begin operation.

Operating the Remote Control

The Beyution NS-RC9DNA-14 remote control utilizes infrared technology to communicate with your television. Ensure a clear line of sight between the remote and the TV's infrared receiver for optimal performance. The effective operating distance is approximately 8 to 10 meters.

Front view of Beyution NS-RC9DNA-14 replacement remote control.
This image displays the front of the Beyution NS-RC9DNA-14 remote control, highlighting all its buttons and their layout, including power, input, number pad, volume, channel, navigation, and DVD controls.

Button Functions Overview

  • POWER: Turns the TV on or off.
  • INPUT: Cycles through available input sources (HDMI, AV, etc.).
  • Number Buttons (0-9): Directly select channels or input numerical values.
  • VOL (+/-): Adjusts the volume level.
  • CH (Up/Down): Changes the television channel.
  • MUTE: Silences or restores the TV audio.
  • INFO*: Displays on-screen information about the current program or input.
  • Navigation Pad (Up/Down/Left/Right/OK): Navigates menus and confirms selections.
  • TV-MENU: Accesses the main television menu.
  • EXIT: Exits the current menu or on-screen display.
  • HOME: Returns to the TV's home screen or main menu.
  • HDMI, DVD, AUDIO: Dedicated input selection buttons.
  • DVD Control Buttons: Play, Pause, Stop, Fast Forward, Rewind, Skip Track (for integrated DVD players or connected DVD devices).

Maintenance

Battery Replacement

Replace the batteries when the remote control's response becomes sluggish or it ceases to function. Always replace both batteries simultaneously with new AAA alkaline batteries. Do not mix old and new batteries or different types of batteries.

Cleaning

To clean the remote control, gently wipe its surface with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the remote's electronics or finish.

Troubleshooting

  • Remote not responding:
    • Ensure batteries are correctly installed and are not depleted. Replace if necessary.
    • Check for any obstructions between the remote control and the TV's infrared sensor.
    • Verify that the remote is pointed directly at the TV.
  • Limited operating range:
    • Replace batteries with fresh ones.
    • Ensure there are no strong light sources (like direct sunlight) interfering with the infrared signal.
  • Specific buttons not working:
    • Some functions may be specific to certain TV models or require the TV to be in a particular mode (e.g., DVD buttons only work when a DVD player is active).
    • If the issue persists, contact customer support.

Specifications

  • Model: NS-RC9DNA-14
  • Connectivity Technology: Infrared
  • Material: ABS Plastic
  • Product Dimensions: 7 x 5 x 2 inches
  • Item Weight: 1.98 ounces
  • Power Source: 2 x AAA Batteries (not included)
  • Maximum Operating Distance: 10 Meters
  • Compatible Insignia TV Models (partial list):
    NS-32DD220NA16, NS-32DD310NA15, NS-20ED310NA15, NS-24DD220NA16, NS-24ED310NA15, NS-24ED310NA15B, NS-28DD220NA16, NS-28DD310NA15, NS-32DD200NA14, NS-32DD200NA14B

Warranty and Support

Warranty Information

This Beyution remote control comes with a 6-month warranty period from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

Customer Support

If you encounter any issues not covered in this manual, or if the remote control is damaged or not working as expected, please contact the seller or manufacturer for assistance. Provide your product model number (NS-RC9DNA-14) and details of the issue for efficient support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.